[ThirstyX3M]

Originally Posted by M4Lou

Replaced the pinch bolts w/ new - torqued to 60nm/41 ft/lbs and did another 1/4 turn. For kicks, check that w/ the wrench at 50ft/lbs and then 60ft/lbs - spec is tighter than both.

Thirsty - do you know the spec of the sway bar end link and tie-rod nut??

Not 100% sure but believe tie rod is 165nm and sway bars are 100nm, I’d double check though, can’t guarantee it’s correct

[gapband]

Originally Posted by TacosRule!

allinon72 Thanks so much for the amazing write-up. Quick question on step 21 part. What is the self-locking nut for, PN 34339806226? How many do I need?

Can you double check my math please? Want to make sure I get all the hardware in a single order.

Thanks again!

Nice! Do you have a finalized list of all the replacement parts?

[TacosRule!]

Originally Posted by gapband

Nice! Do you have a finalized list of all the replacement parts?

Wouldnt mind having OP do a final check