Bimmercode coding on G01 - Share you coding changes

g0t2bmiirii · 03-06-2020, 01:30 AM

Hey guys, can anyone confirm if this list is right after selecting the X3 in the menu start page. These are my only options.. would like some confirmation

Finnedgang · 03-06-2020, 01:49 AM

Hi guys, in your opinions what are "the must" coding options for the x4 ?

lochview · 03-06-2020, 01:50 AM

Quote:

Originally Posted by g0t2bmiirii

Hey guys, can anyone confirm if this list is right after selecting the X3 in the menu start page. These are my only options.. would like some confirmation

Yep, same options I have in BimmerCode with my MY2020 X3

pdroth · 03-06-2020, 12:28 PM

Quote:

Originally Posted by lochview

Yep, same options I have in BimmerCode with my MY2020 X3

Does this mean still no go on coding SMS on 2020 X3?

g0t2bmiirii · 03-06-2020, 02:26 PM

Quote:

Originally Posted by lochview

Quote:

Originally Posted by g0t2bmiirii

Hey guys, can anyone confirm if this list is right after selecting the X3 in the menu start page. These are my only options.. would like some confirmation

Yep, same options I have in BimmerCode with my MY2020 X3

Thanks.. i haven't used it for some time. Is there a way to turn on fog lights while it's on DRL?

sinbad4 · 03-06-2020, 06:34 PM

Quote:

Originally Posted by g0t2bmiirii

Thanks.. i haven't used it for some time. Is there a way to turn on fog lights while it's on DRL?

Yes, coming next version of BimmerCode. Also I’ve expert mode - see my previous post: https://x3.xbimmers.com/forums/showt...3#post25800823

titomi · 03-06-2020, 07:16 PM

Quote:

Originally Posted by satz

Thank you Titomi

what I meant by the point about remembering seat heating setting... I believe that everytime you start the car you need to turn on the seat heating again.

On my X2 there was a coding you could do that would permanently remember the setting of your seat heating, everytime you start the car.

Do you know if you can do that on the X3? I couldn't find that on Bimmercode's manual

You can try to set a very high temperature for the automatic startup in iDrive. Didn't try it myself, so don't know what the range is. Haven't been looking for that option in BC.

g0t2bmiirii · 03-07-2020, 12:48 AM

Quote:

Originally Posted by sinbad4

Quote:

Originally Posted by g0t2bmiirii

Thanks.. i haven't used it for some time. Is there a way to turn on fog lights while it's on DRL?

Yes, coming next version of BimmerCode. Also I’ve expert mode - see my previous post: https://x3.xbimmers.com/forums/showt...3#post25800823

Thanks a lot man i appreciate it. I'm gonna wait look for it when i get a chance. After looking at the link you shared i saw someone mentioned shutting off the loud ass horn when you lock the car when you walk away. That's a must do for me.

Now when in which category do i go into to start the expert mode? (Sorry, NooB here lol)

sinbad4 · 03-07-2020, 08:35 AM

Quote:

Originally Posted by g0t2bmiirii

Thanks a lot man i appreciate it. I'm gonna wait look for it when i get a chance. After looking at the link you shared i saw someone mentioned shutting off the loud ass horn when you lock the car when you walk away. That's a must do for me.

Now when in which category do i go into to start the expert mode? (Sorry, NooB here lol)

Gotcha. I tried to make it clear in original post, but, if you're not familiar, then I can see the not understanding. Breaking down:

# Fog lights on with parking lights
Body Domain Controller (BDC): NSW_EIN_AUF_LDS_STL nict_active --> active

"Body Domain Controller" aka BDC is the module in Bimmercode (BDCXXXX in eSys).

"NSW_EIN_AUF_LDS_STL" is the FDL code, or the function to change.

"nict_active --> active" by default, value is "nict_active", this needs to change to "active"

I've done lots of car coding in the past. The abbreviated German language makes this stuff extra difficult for the non-German speaker (me).

kevinwoods · 03-07-2020, 11:06 AM

Did anyone figure out code to enable closing liftgate with fob?

I use e-sys for coding.

I have a 2019 X3, and would appreciate if someone could post a working code.

nb67 · 03-07-2020, 11:36 AM

Quote:

Originally Posted by kevinwoods

Did anyone figure out code to enable closing liftgate with fob? I have a 2019 X3, and would appreciate if someone could post a working code.

Yep, it can be done.

Have a look at the coding features in the app Kev.

It's under 'tailgate' in the bimmercode app https://bimmercode.app/cars/g01/

kevinwoods · 03-07-2020, 02:16 PM

Quote:

Originally Posted by nb67

Quote:

Originally Posted by kevinwoods

Did anyone figure out code to enable closing liftgate with fob? I have a 2019 X3, and would appreciate if someone could post a working code.

Yep, it can be done.

Have a look at the coding features in the app Kev.

It's under 'tailgate' in the bimmercode app https://bimmercode.app/cars/g01/

Thanks. could you let me know which DFL needs to be coded?
I am using e-sys.

g0t2bmiirii · 03-07-2020, 03:10 PM

Quote:

Originally Posted by sinbad4

Quote:

Originally Posted by g0t2bmiirii

Thanks a lot man i appreciate it. I'm gonna wait look for it when i get a chance. After looking at the link you shared i saw someone mentioned shutting off the loud ass horn when you lock the car when you walk away. That's a must do for me.

Now when in which category do i go into to start the expert mode? (Sorry, NooB here lol)

Gotcha. I tried to make it clear in original post, but, if you're not familiar, then I can see the not understanding. Breaking down:

# Fog lights on with parking lights
Body Domain Controller (BDC): NSW_EIN_AUF_LDS_STL nict_active --> active

"Body Domain Controller" aka BDC is the module in Bimmercode (BDCXXXX in eSys).

"NSW_EIN_AUF_LDS_STL" is the FDL code, or the function to change.

"nict_active --> active" by default, value is "nict_active", this needs to change to "active"

I've done lots of car coding in the past. The abbreviated German language makes this stuff extra difficult for the non-German speaker (me).

Thanks a lot man, i appreciate it!!

Yobyot · 03-07-2020, 05:44 PM

Quote:

Originally Posted by sinbad4

Gotcha. I tried to make it clear in original post, but, if you're not familiar, then I can see the not understanding. Breaking down:

# Fog lights on with parking lights
Body Domain Controller (BDC): NSW_EIN_AUF_LDS_STL nict_active --> active

"Body Domain Controller" aka BDC is the module in Bimmercode (BDCXXXX in eSys).

"NSW_EIN_AUF_LDS_STL" is the FDL code, or the function to change.

"nict_active --> active" by default, value is "nict_active", this needs to change to "active"

I've done lots of car coding in the past. The abbreviated German language makes this stuff extra difficult for the non-German speaker (me).

Nice. Thanks.

I think we really need an E-Sys G01 FLD cheat sheet. I use Launcher Pro and the "integrated" cheat sheets are just so frustrating to use -- and many times inaccurate.

I'm longing for the old-school days (circa 2015) when people collected all the known-working codes into very cool lists of possible coding changes.

cipher5 · 03-07-2020, 07:33 PM

Looks like to get the X3M cluster you have to have DKOMBI4. Before the X3M came out, the X3s came with DKOMBI2. Is that an actual hardware upgrade or is that just software. If software, how does one update that? Dealership?

ramparts · 03-08-2020, 04:34 AM

Quote:

Originally Posted by cipher5

Looks like to get the X3M cluster you have to have DKOMBI4. Before the X3M came out, the X3s came with DKOMBI2. Is that an actual hardware upgrade or is that just software. If software, how does one update that? Dealership?

The original x3ms didn’t have dkombi4 - that’s the live cockpit hardware with the backwards tacho.

There should be a way to figure out how to get it on m40s with dkombi2, just nobody has figured out the settings yet.

We need someone with an x3m to see their settings, or share a VIN so we can calculate in esys and toeknmasters diff tool

MdW86 · 03-08-2020, 05:26 AM

Quote:

Originally Posted by sinbad4

.

Quote:

Originally Posted by sinbad4

# Fog lights on with parking lights
Body Domain Controller (BDC): NSW_EIN_AUF_LDS_STL nict_active --> active

"Body Domain Controller" aka BDC is the module in Bimmercode (BDCXXXX in eSys).

"NSW_EIN_AUF_LDS_STL" is the FDL code, or the function to change.

"nict_active --> active" by default, value is "nict_active", this needs to change to "active"

I've done lots of car coding in the past. The abbreviated German language makes this stuff extra difficult for the non-German speaker (me).

How much will this influence the battery? Any ideas?

kevinwoods · 03-08-2020, 10:25 AM

Did anyone figure out code to enable closing liftgate with fob?

I use e-sys for coding.

I have a 2019 X3, and would appreciate if someone could post a working code.

nb67 · 03-08-2020, 02:12 PM

Quote:

Originally Posted by kevinwoods

Thanks. could you let me know which DFL needs to be coded?
I am using e-sys.

Sorry Kev, I wouldn't know via E-SYS.

Easy with bimmercode but no idea via E-SYS i'm afraid pal.

ramparts · 03-08-2020, 04:15 PM

Quote:

Originally Posted by kevinwoods

Did anyone figure out code to enable closing liftgate with fob?

I use e-sys for coding.

I have a 2019 X3, and would appreciate if someone could post a working code.

Quote:

Originally Posted by kevinwoods

Did anyone figure out code to enable closing liftgate with fob?

I use e-sys for coding.

I have a 2019 X3, and would appreciate if someone could post a working code.

You can do this from the factory. Just hold down the button when it's open and let go once it's all the way down

kevinwoods · 03-09-2020, 09:04 PM

Quote:

Originally Posted by nb67

Quote:

Originally Posted by kevinwoods

Thanks. could you let me know which DFL needs to be coded?
I am using e-sys.

Sorry Kev, I wouldn't know via E-SYS.

Easy with bimmercode but no idea via E-SYS i'm afraid pal.

Thanks!

kevinwoods · 03-09-2020, 09:06 PM

Quote:

Originally Posted by davidoff86

Quote:

Originally Posted by kevinwoods

Did anyone figure out code to enable closing liftgate with fob?

I use e-sys for coding.

I have a 2019 X3, and would appreciate if someone could post a working code.

Quote:

Originally Posted by kevinwoods

Did anyone figure out code to enable closing liftgate with fob?

I use e-sys for coding.

I have a 2019 X3, and would appreciate if someone could post a working code.

You can do this from the factory. Just hold down the button when it's open and let go once it's all the way down

Is your G01 a US version? I saw other people also looking for this feature so I think it is disabled OOB. At least for the US market.

03-06-2020, 01:30 AM	#2245
g0t2bmiirii First Lieutenant 60 Rep 308 Posts Drives: 2020 BMW X3 M40i Join Date: Feb 2020 Location: Queens New York iTrader: (0)	Hey guys, can anyone confirm if this list is right after selecting the X3 in the menu start page. These are my only options.. would like some confirmation Attached Images __________________ 2020 BMW X3 M40i (stock)
	Appreciate 0 Quote

03-06-2020, 01:49 AM	#2246
Finnedgang New Member 11 Rep 16 Posts Drives: X4 Join Date: Feb 2020 Location: Italy iTrader: (0)	Hi guys, in your opinions what are "the must" coding options for the x4 ?
	Appreciate 0 Quote

03-07-2020, 11:06 AM	#2254
kevinwoods Private 27 Rep 85 Posts Drives: 2019 BMW X3 Join Date: Dec 2019 Location: New York iTrader: (0)	Did anyone figure out code to enable closing liftgate with fob? I use e-sys for coding. I have a 2019 X3, and would appreciate if someone could post a working code.
	Appreciate 0 Quote

03-07-2020, 07:33 PM	#2259
cipher5 506 Rep 3,469 Posts Drives: 2020 Donington Grey X3M Comp Join Date: Jul 2007 Location: Chicago, IL iTrader: (12)	Looks like to get the X3M cluster you have to have DKOMBI4. Before the X3M came out, the X3s came with DKOMBI2. Is that an actual hardware upgrade or is that just software. If software, how does one update that? Dealership?
	Appreciate 0 Quote

03-08-2020, 10:25 AM	#2262
kevinwoods Private 27 Rep 85 Posts Drives: 2019 BMW X3 Join Date: Dec 2019 Location: New York iTrader: (0)	Did anyone figure out code to enable closing liftgate with fob? I use e-sys for coding. I have a 2019 X3, and would appreciate if someone could post a working code.
	Appreciate 0 Quote