X3M continued driving possible:chassis

JonathanDavy · 04-19-2024, 03:47 PM

Hey guys. Was on a long drive and continued driving possible: chassis popped up. Put it into limp mode and I can’t use any of the M modes and the mode for the suspension on the odometer is blank. Pulled the code and it’s coming up at 1F052F. Acceleration Controller Intervention. Anyone else have this? I am tuned on BM3 OTS E30 stage 1 and lowered on H&R suspension.

Dinan_Rated · 04-19-2024, 05:30 PM

is it tuned?

https://www.bmwfault.codes/XMLDiagVi...IAMAA0ADAANAA=

JonathanDavy · 04-19-2024, 05:32 PM

Yes. Please read my original post. You may have missed that part.

Dinan_Rated · 04-19-2024, 07:55 PM

Quote:

Originally Posted by JonathanDavy

Yes. Please read my original post. You may have missed that part.

I have seen this issue with the e30 and e50 tunes. Can you revert to stock and confirm if errors is resolved?

JonathanDavy · 04-19-2024, 08:07 PM

I’ll try that and see what happens. Thanks!

Dinan_Rated · 04-20-2024, 11:14 AM

Quote:

Originally Posted by JonathanDavy

I’ll try that and see what happens. Thanks!

LMK thanks, good luck!

knali8 · 04-21-2024, 06:47 AM

This is a suspension sensor issue. Get someone to run a diagnostics test, or do it yourself and you should see something similar to "open circuit front right suspension".

I had this issue come up after installing my Eibachs, turns out the front right sensor cable was kinked. You have to be very careful with those sensor cables.. the kinked was actually minimal but it's enough for the car to sensor "low voltage" on the cable.

Goodluck. By the way you should be fine to drive however, you won't be able to change the suspension mode but all other settings should work.

Skibof · 04-24-2024, 12:13 AM

Happened to me at about 3000 miles and they had to replace the left front strut. unfortunately it was not communicating with the computers in the car.

asp17 · 04-24-2024, 10:05 AM

Quote:

Originally Posted by knali8

This is a suspension sensor issue. Get someone to run a diagnostics test, or do it yourself and you should see something similar to "open circuit front right suspension".

I had this issue come up after installing my Eibachs, turns out the front right sensor cable was kinked. You have to be very careful with those sensor cables.. the kinked was actually minimal but it's enough for the car to sensor "low voltage" on the cable.

Goodluck. By the way you should be fine to drive however, you won't be able to change the suspension mode but all other settings should work.

YES.. this is what happened to me after springs install too...

04-19-2024, 03:47 PM	#1
JonathanDavy Enlisted Member 3 Rep 33 Posts Drives: BMW X3 M40 Join Date: Feb 2022 Location: Canyon Lake, Ca iTrader: (0) Garage List 2019 BMW X3 M40i [0.00]	X3M continued driving possible:chassis Hey guys. Was on a long drive and continued driving possible: chassis popped up. Put it into limp mode and I can’t use any of the M modes and the mode for the suspension on the odometer is blank. Pulled the code and it’s coming up at 1F052F. Acceleration Controller Intervention. Anyone else have this? I am tuned on BM3 OTS E30 stage 1 and lowered on H&R suspension.
	Appreciate 0 Tweet Quote

04-19-2024, 05:30 PM	#2
Dinan_Rated DINAN SELLER 176 Rep 550 Posts Drives: BMW X3MC X3M40i, DINAN M5 V10 Join Date: Apr 2017 Location: Chicago iTrader: (3)	is it tuned? https://www.bmwfault.codes/XMLDiagVi...IAMAA0ADAANAA= __________________ 2024 X3M COMP, 2019 X3 M40i DINAN, 2015 335xi DINAN stage 4, 2014 BMW i8, 2010 M5 V10 DINAN S2
	Appreciate 0 Quote

04-19-2024, 05:32 PM	#3
JonathanDavy Enlisted Member 3 Rep 33 Posts Drives: BMW X3 M40 Join Date: Feb 2022 Location: Canyon Lake, Ca iTrader: (0) Garage List 2019 BMW X3 M40i [0.00]	Yes. Please read my original post. You may have missed that part.
	Appreciate 0 Quote

04-19-2024, 08:07 PM	#5
JonathanDavy Enlisted Member 3 Rep 33 Posts Drives: BMW X3 M40 Join Date: Feb 2022 Location: Canyon Lake, Ca iTrader: (0) Garage List 2019 BMW X3 M40i [0.00]	I’ll try that and see what happens. Thanks!
	Appreciate 1 Dinan_Rated175.50 Quote

04-21-2024, 06:47 AM	#7
knali8 First Lieutenant 429 Rep 348 Posts Drives: 2021 X3M Comp Join Date: Aug 2015 Location: Melbourne iTrader: (0)	This is a suspension sensor issue. Get someone to run a diagnostics test, or do it yourself and you should see something similar to "open circuit front right suspension". I had this issue come up after installing my Eibachs, turns out the front right sensor cable was kinked. You have to be very careful with those sensor cables.. the kinked was actually minimal but it's enough for the car to sensor "low voltage" on the cable. Goodluck. By the way you should be fine to drive however, you won't be able to change the suspension mode but all other settings should work. Last edited by knali8; 04-21-2024 at 06:52 AM..
	Appreciate 0 Quote

04-24-2024, 12:13 AM	#8
Skibof New Member 6 Rep 24 Posts Drives: 2020 BMW X3M Join Date: Jul 2020 Location: Arizona/Alaska iTrader: (0)	Happened to me at about 3000 miles and they had to replace the left front strut. unfortunately it was not communicating with the computers in the car.
	Appreciate 0 Quote