01-18-2022, 08:55 PM | #1 |
Private First Class
122
Rep 185
Posts |
I was wiping down the interior tailgate area on my 2021 X4MC today and noticed the trim piece below was loose. Turns out it is missing a rivet which is strange. I searched around getbmwparts.com but couldn't get in the ballpark of finding it. It fits in that little circle towards the top. The other side has a black plastic rivet there. Any ideas where to look? I assume it is a general piece used across models. Thanks!
|
01-19-2022, 07:49 AM | #2 |
Major
991
Rep 1,495
Posts |
Looks like it's a two part rivet with two separate part numbers, which I've never seen before...interesting.
#13 & 14 in the attached diagram are parts 51717048316 and 51717154239, respectively. Hope this helps.
__________________
Then - E53, E85, E92, E82, F15, F80, G01
Now - F97, Macan S |
Appreciate
1
chimp122.00 |
01-19-2022, 09:31 AM | #3 |
Private First Class
87
Rep 161
Posts |
This is very interesting. I bought my 2020 X3M certified pre-owned and this exact plastic rivet was missing. On mine, there is obvious signs of where it was pried off and left scratches.
Coincidence? To rectify it, I bought a general kit off of Amazon. It’s this one: GOOACC 240PCS Bumper Retainer Clips Car Plastic Rivets Fasteners Push Retainer Kit Most Popular Sizes Auto Push Pin Rivets Set -Door Trim Panel Fender Clips for GM Ford Toyota Honda Chrysler https://www.amazon.com/dp/B07L6FJGR4...MN7WFFRTQAZ0JZ I forget the exact river within that kit. I just found the correct diameter, but the length was too long. I just cut the last 1/4” off and got in there nice and snug. |
Appreciate
1
chimp122.00 |
01-19-2022, 11:15 AM | #5 |
Lieutenant
113
Rep 499
Posts |
ye ai bought a kit off amanzon with assorted plastic rivets.
__________________
08 135i|1M conversion|Montego Blue|TFT Inlets|Riss Racing DPs|Riss Racing Exhaust|Tial BOV|VRSF 7"FMIC|WEDGE TUNED|BMS Short Throw Shift|BlackLines|PURE stg2| follow me on instagram!
|
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|