What did you do to your X3/X4 M today?

Sebap3 · 05-31-2020, 11:28 AM

Quote:

Originally Posted by Will Pwr

Nice work on the dash cam! I still need to do my rear, but I used a Blendmount on my front install too. I recycled the mount kit from my F80 and bought an extension piece to make the camera tuck up a bit more. I might have been able to get away with the shorter extension piece though.

Thanks. I’ve been thinking of doing the same actually. I like the look of it being tucked in more. Also I want it a bit closer to the windshield to minimize the reflections. So you think going with the shorter extension is better?

Sebap3 · 05-31-2020, 11:34 AM

Quote:

Originally Posted by ltym5

Was the install of the show n go plate pretty easy? Got any DIY pics or vid of the procedure?

Yes it’s extremely easy. All you gotta do is drill some holes and screw it in. Comes with instructions. It says to use 3 screws but I used 4. I’ll take some pics from underneath.
I do with that there was a way to tuck it in more to make it less visible but not possible with the design.
It looks a lot better than installing the plate mount. And I only use it when I go through tunnels in NYC. State police sucks and breaks balls about front plate. I haven’t had a front plate on any of my cars at least 10 years, never a ticket. But going through tunnels I’ve been pulled over twice. One warning and one ticket.

ltym5 · 05-31-2020, 11:48 AM

Quote:

Originally Posted by Sebap3

Yes it’s extremely easy. All you gotta do is drill some holes and screw it in. Comes with instructions. It says to use 3 screws but I used 4. I’ll take some pics from underneath.
I do with that there was a way to tuck it in more to make it less visible but not possible with the design.
It looks a lot better than installing the plate mount. And I only use it when I go through tunnels in NYC. State police sucks and breaks balls about front plate. I haven’t had a front plate on any of my cars at least 10 years, never a ticket. But going through tunnels I’ve been pulled over twice. One warning and one ticket.

I got pulled over once in my 750 with a warning for no front plates, but since then nothing. I just like the idea that if I do get pull over for no front plates, then I'll activate the switch and let the officer know that I do have it. LOL

Transfer · 05-31-2020, 12:05 PM

Quote:

Originally Posted by ltym5

I want to put some Toyo R888R for the rears, do you know what's the widest width our 21s can accomodate?

I would say 295s rear but depends on specific tire width at 295 I suppose. PS4S in 295 overhangs the rim some (I like that) and is very close to rubbing the inside wall, like no room to spare.

Will Pwr · 05-31-2020, 01:54 PM

Quote:

Originally Posted by Sebap3

Thanks. I’ve been thinking of doing the same actually. I like the look of it being tucked in more. Also I want it a bit closer to the windshield to minimize the reflections. So you think going with the shorter extension is better?

I don't know for sure. The 1/2" shorter length in theory would reduce the bowing I have, but my concern is on the length/position of the 2nd pivot point and if it clears the mirror mount hump (hope that makes sense LOL). I'd imagine it would still work, it would just impact how the overall vertical position height vs the windshield....

ltym5 · 05-31-2020, 02:34 PM

Quote:

Originally Posted by Transfer

I would say 295s rear but depends on specific tire width at 295 I suppose. PS4S in 295 overhangs the rim some (I like that) and is very close to rubbing the inside wall, like no room to spare.

Thanks for the info, have you lowered your car with 295 setup?

Transfer · 05-31-2020, 03:48 PM

Quote:

Originally Posted by ltym5

Quote:

Originally Posted by Transfer

I would say 295s rear but depends on specific tire width at 295 I suppose. PS4S in 295 overhangs the rim some (I like that) and is very close to rubbing the inside wall, like no room to spare.

Thanks for the info, have you lowered your car with 295 setup?

All stock and no spacers.

Jiovanny · 05-31-2020, 10:04 PM

Quote:

Originally Posted by Sebap3

Quote:

Originally Posted by ltym5

Was the install of the show n go plate pretty easy? Got any DIY pics or vid of the procedure?

Yes it’s extremely easy. All you gotta do is drill some holes and screw it in. Comes with instructions. It says to use 3 screws but I used 4. I’ll take some pics from underneath.
I do with that there was a way to tuck it in more to make it less visible but not possible with the design.
It looks a lot better than installing the plate mount. And I only use it when I go through tunnels in NYC. State police sucks and breaks balls about front plate. I haven’t had a front plate on any of my cars at least 10 years, never a ticket. But going through tunnels I’ve been pulled over twice. One warning and one ticket.

where did you buy this? I have a curtain for my rear plates, I also reside in NY and front plates are a must but I don't rock them, haven't gottena ticket to date but really like this one.

Jiovanny · 05-31-2020, 10:06 PM

Quote:

Originally Posted by ltym5

Quote:

Originally Posted by Transfer

I would say 295s rear but depends on specific tire width at 295 I suppose. PS4S in 295 overhangs the rim some (I like that) and is very close to rubbing the inside wall, like no room to spare.

Thanks for the info, have you lowered your car with 295 setup?

I have. Lowered on H&R Springs and 12mm all around. Driven for about 700 miles or so on this setup and I fucking love it. It feels like a totally different vehicle.

forza1976 · 06-02-2020, 07:04 PM

Wrapped the strut brace!

MrItaly · 06-02-2020, 07:19 PM

Quote:

Originally Posted by forza1976

Wrapped the strut brace!

Looks guuuuuud.....

spta97 · 06-02-2020, 08:13 PM

Quote:

Originally Posted by forza1976

Wrapped the strut brace!

Looks great!

Did you remove it or keep it in while you wrapped?

Now get to wrapping those side braces

forza1976 · 06-02-2020, 08:14 PM

Quote:

Originally Posted by spta97

Looks great!

Did you remove it or keep it in while you wrapped?

Now get to wrapping those side braces

Definitely removed. Really easy to remove.

forza1976 · 06-02-2020, 08:34 PM

I wonder if this is even gonna hold up to the heat under the hood?

_x3M_Competition · 06-02-2020, 08:56 PM

Added AutoTecknic Matte Black shift paddles, MSS Urban Kit, Front painted reflectors, and 15mm H&R spacers front and rear. 1st two pics are before last two are after. Haven't really driven the car so I'm still expecting it to lower more once fully settled.

AlpineWhite_SJ · 06-02-2020, 09:05 PM

Got the package from iND today. Put in the rear reflector deletes. Will have to wait until more free time to do the fronts. I hate doing the fronts.

r33_RGSport · 06-02-2020, 10:05 PM

Quote:

Originally Posted by AlpineWhite_SJ

Got the package from iND today. Put in the rear reflector deletes. Will have to wait until more free time to do the fronts. I hate doing the fronts.

You'll be surprised how easy it is compared to F15 X5. (If you ever done one).

r33_RGSport · 06-02-2020, 10:06 PM

Quote:

Originally Posted by cerebrallp02

Added AutoTecknic Matte Black shift paddles, MSS Urban Kit, Front painted reflectors, and 15mm H&R spacers front and rear. 1st two pics are before last two are after. Haven't really driven the car so I'm still expecting it to lower more once fully settled.

Looking good.

AlpineWhite_SJ · 06-02-2020, 11:30 PM

Quote:

Originally Posted by r33_RGSport

You'll be surprised how easy it is compared to F15 X5. (If you ever done one).

Nope, only done them on my F80 and it was a pain in the ass.

Will Pwr · 06-02-2020, 11:37 PM

Quote:

Originally Posted by AlpineWhite_SJ

Nope, only done them on my F80 and it was a pain in the ass.

Ditto here and 100% agree. It by no means was a difficult thing, but definitely a pain in the ass for sure...but at least with the F80, we didn't have to deal with rivets either LOL

AlpineWhite_SJ · 06-02-2020, 11:46 PM

Quote:

Originally Posted by Will Pwr

Ditto here and 100% agree. It by no means was a difficult thing, but definitely a pain in the ass for sure...but at least with the F80, we didn't have to deal with rivets either LOL

Got the rivet tool, so hopefully that helps

Will Pwr · 06-02-2020, 11:52 PM

Quote:

Originally Posted by AlpineWhite_SJ

Got the rivet tool, so hopefully that helps

Haha, yeah it will to fully complete the install.

06-02-2020, 07:04 PM	#450
forza1976 Major General 3398 Rep 6,589 Posts Drives: BMW Join Date: Aug 2007 Location: 49417 and 60610 iTrader: (13) Garage List 2022 BMW M3X [10.00]	Wrapped the strut brace! Attached Images
	Appreciate 6 FrankieNuo1219.00 AlexFL7836.00 r33_RGSport12960.00 Max Well4723.50 DucatiT1098S163.50 NWX3M49.00 Quote

06-02-2020, 08:34 PM	#454
forza1976 Major General 3398 Rep 6,589 Posts Drives: BMW Join Date: Aug 2007 Location: 49417 and 60610 iTrader: (13) Garage List 2022 BMW M3X [10.00]	I wonder if this is even gonna hold up to the heat under the hood?
	Appreciate 0 Quote

06-02-2020, 08:56 PM	#455
_x3M_Competition Private First Class 147 Rep 155 Posts Drives: 2020 x3M Competition DGM Join Date: May 2011 Location: Los Angeles, CA iTrader: (2)	Added AutoTecknic Matte Black shift paddles, MSS Urban Kit, Front painted reflectors, and 15mm H&R spacers front and rear. 1st two pics are before last two are after. Haven't really driven the car so I'm still expecting it to lower more once fully settled. Attached Images __________________ 2020 Dark Graphite Metallic x3M Competition Mods: BM3Tuning x Paul Johnson Tunes Custom Full E85 stage1+, MSS Adjustable Springs, AutoTeknic Matte Black Paddle Shifters, RG Front paint-matched reflectors, H&R 15mm F/R Spacers. IG: _x3M_Competition
	Appreciate 9 AlexFL7836.00 r33_RGSport12960.00 Will Pwr748.50 -JLT-3445.50 Max Well4723.50 BrockDM2042.00 LimiX4m40152.50 DucatiT1098S163.50 AZM40i259.50 Quote

06-02-2020, 09:05 PM	#456
AlpineWhite_SJ Banned 1578 Rep 1,024 Posts Drives: 2018 F80 M3 ZCP, 2020 F97 X3MC Join Date: Sep 2017 Location: Bay Area, CA iTrader: (0)	Got the package from iND today. Put in the rear reflector deletes. Will have to wait until more free time to do the fronts. I hate doing the fronts.
	Appreciate 0 Quote