06-17-2020, 04:58 PM | #1 |
New Member
0
Rep 7
Posts |
Help!!! E83 won't start after forgetting self-learning step of valvetronic motor
HI all,
I was pointed here. First time poster, long time reader. I need help, Appreciate any inputs. One day ago, I cleaned the space around the valvetronic gasket due to minor oil leaking by taking valvetronic out and putting it back. Unfortunately forgot to keep the key at position 2 for 30 seconds, the car didn't want to start at first a few tries. Cause everything was fine with the car, except minor oil leaking, then I adjusted the valvetronic motor by 4mm Allen key, thought it is related. Actually I got the car running after a few adjustments, which made the valve at close to right position, I guess. But code 2A38 was thrown, I thought I had messed up the timing between valvetronic and crankshaft. Then I tried to relearn process the limit position, no luck. Still don't want to start. Anyone can point me to right direction of fixing this. I am at a dead end. HELP!!! |
Post Reply |
Bookmarks |
|
|