[Max Well]

Originally Posted by BeamerLife

Still the world fastest X3M first one to run 9s on stock motor. Ran 9.93 1/4 Mile full weight.
Ran 9.94 at Atco 7/9/23 Video on my instagram also done full weight...

Thanks for sharing, BeamerLife - that'll take over the top spot on the Leaderboard! I've entered your slip into a prelim spreadsheet, and once I know the unknowns highlighted in yellow I can prep the final sheets and add you to the files. Need to know the E% for fuel, do you have the spare (I think I can see a pano roof on your F97), if you remember your tire psi F/R for that record run 9 Jul, and estimated tank volume. I found the weather for Atco that day and calculated the DA so don't need that.

I also updated your wheel/tire info in our Members' list in the Stickies. Still don't know the front and rear wheel ETs? Also - if you can share your wheel/tire weights I can move your listing from the 'Weight N/A' category up to the known list. Helps out those interested in weight reduction when considering which to buy.

If/when you get some formal slips with your new engine mods you'll be the first to document in the St2+ category, so I can add you there as well.

[BeamerLife]

Pano Roof unfortunately,E85 custom tune content was e80 content, tire pressure 30psi all around. front wheels 16 et rear 31et around 3/4 fuel in tank full interior including spare tire. Not sure of my wheel and tire weight. They are forged Vossen M-X6 with Nitto 555r2.

[Max Well]

We have a new St2 and All Class Leader - congratulations, @BeamerLife!

[Dawgz]

Finally was able to join the 9 sec club tonight!

9.960

Stage 1 E50 tune, Ethanol sensor reading E52.

Fuel capacity was 1/2 tank.

Tire pressure: 27 front 23 rear.

Passenger seat, Rear seats and spare removed.


https://www.youtube.com/shorts/Uv3G7S8pXSQ

[Oldgixxer]

Congrats Dawgz!!!!

[Max Well]

Originally Posted by Dawgz

Finally was able to join the 9 sec club tonight!...

Yet another amazing run, Dawgz - congratulations!

Not sure how much higher the St1 bar can be raised! As always, appreciate you sharing your full slip, providing all necessary spreadsheet details, and also for the video documentation. Great work!

Here are the updated spreadsheets:

[Dawgz]

Originally Posted by Oldgixxer

Congrats Dawgz!!!!

Thank you!

[BeamerLife]

Originally Posted by Jnat

These things can fly, awesome build...

Push my record little further. Ran 9.84 1/4 full weight 3/4 tank of gas. My x3M weighs 4940 with me in it and 4610 by itself full interior and spare. Had misfire and burnt up 2 plugs. My tuner was expecting mid 9s will try again this month.I can’t get videos to post on here. You can view them on my instagram. @joef97bimmer

[BeamerLife]

Great Job Dawgz Vik💪🏼🚀🔥 New World record Stock Turbo👑 Great job and welcome to the 9s we will be adding more members very soon. So many sick builds. Love seeing more guys push the platform and see more guys doing R&D testing out new products for our cars. It’s takes a village to one person can’t do it alone.updated list of my mods.


Mods:
Shop:AutoCraft
Tuner:GTP Motorsports/BM3
Built Motor with VAC Rods and Pistons and ARP Head studs
Turbos: Pures STG2+
Transmission: Pure Drivetrain Solutions Stage 2 and Billet Stator Race Converter
Exhaust: Active Autowerke full exhaust
Fueling: Evoultion of Speed Port injections 1050cc injectors with reflex plus controller
Custom made lpfp RK Tunes
CSF Manifold
Mashimoto Charge Pipes
RKTune front mount intakes and catless down pipes
xHP tuner
Solid rear diff bushing @einhorn industries
Custom oem modified driveshaft @autocraftBMW
Vossen Custom Forged MX6 Wheels 20” with Nitto 555r2 Drag Radial
Front 275/40/20 9.5” 16et
Rear 305/35/20 10.5” 31et

[Dawgz]

Originally Posted by BeamerLife

Great Job Dawgz Vik💪🏼🚀🔥 New World record Stock Turbo👑 Great job and welcome to the 9s we will be adding more members very soon. So many sick builds. Love seeing more guys push the platform and see more guys doing R&D testing out new products for our cars. It’s takes a village to one person can’t do it alone.updated list of my mods.


Mods:
Shop:AutoCraft
Tuner:GTP Motorsports/BM3
Built Motor with VAC Rods and Pistons and ARP Head studs
Turbos: Pures STG2+
Transmission: Pure Drivetrain Solutions Stage 2 and Billet Stator Race Converter
Exhaust: Active Autowerke full exhaust
Fueling: Evoultion of Speed Port injections 1050cc injectors with reflex plus controller
Custom made lpfp RK Tunes
CSF Manifold
Mashimoto Charge Pipes
RKTune front mount intakes and catless down pipes
xHP tuner
Solid rear diff bushing @einhorn industries
Custom oem modified driveshaft @autocraftBMW
Vossen Custom Forged MX6 Wheels 20” with Nitto 555r2 Drag Radial
Front 275/40/20 9.5” 16et
Rear 305/35/20 10.5” 31et

Thanks bro!

You definitely could have went lower into the 9s.

[Oldgixxer]

Originally Posted by BeamerLife

Push my record little further. Ran 9.84 1/4 full weight 3/4 tank of gas. My x3M weighs 4940 with me in it and 4610 by itself full interior and spare. Had misfire and burnt up 2 plugs. My tuner was expecting mid 9s will try again this month.I can’t get videos to post on here. You can view them on my instagram. @joef97bimmer

140mph trap?!!!! Holy F!!!

[Max Well]

Originally Posted by BeamerLife

Push my record little further. Ran 9.84 1/4...

Originally Posted by BeamerLife

... Love seeing more guys push the platform and see more guys doing R&D testing out new products for our cars. It’s takes a village to one person can’t do it alone.updated list of my mods...

Thanks for sharing your St2M+ Class slip, BeamerLife - first one to post in that class here on the Forum, and you raise the bar further as All Class Leader! Also appreciate you sharing your mod details - although I can't record all of that info on the spreadsheets I am able to place some of it on your personal log.

Here are the updated spreadsheets, and look forward to seeing where you and others take the F97's performance in the future!

[ronsteroid491]

hanks for updating the OP with the link to the current All Class Leaderboards for F97/F98. Having a centralized location for easy reference is a great idea, especially for those looking for specific information without scrolling through all the pages. The added Garage Door Comparative Analysis of Dragy vs Formal Slip Results at Gainesville Raceway is a valuable addition too!

[BeamerLife]

Thanks for creating the data base. I do t hide any mods. I love to see everyone pushing these beast. Now we have 3 guys running 9s and bunch more very close to 9. Even more impressive most of the guys are stock🚀🚀🚀

[BrockDM]

Last track day of the year was a good one! New PB and new stock turbo record

Same mods as before with the exception to wheels and tires. I am now on a new track setup. (I'll share in the wheel thread soon as well)

LFI TRS02
F: 20x9.5 with 275/40/20 Nitto NT555RII
R: 18x10 with 305/45/18 Mickey Thompson ET Street R

DA was -455ft

https://youtube.com/shorts/2bpaCA97vFU?feature=share

[Oldgixxer]

Thats awesome,congrats on your PB! Badass
That 1.493 short time might be the 60' record holder on these pages as well

[BrockDM]

Originally Posted by Oldgixxer

Thats awesome,congrats on your PB! Badass
That 1.493 short time might be the 60' record holder on these pages as well

Thank you bro! goldfz8 has gone 1.47 to the 60ft so I have a little more work to do. Just need good track prep to hold it. I've been 1.48 but towards the end of the season they quit prepping as much. Next year!

[Max Well]

Originally Posted by BrockDM

Last track day of the year was a good one! New PB and new stock turbo record ...

Congratulations to BrockDM as he retakes the St2 Lead spot and reaches another PB!

It takes a huge amount of time, effort and expense to reach the times and speeds you and others here are achieving - much appreciation for the hard work and excellent documentation!

Attaching the updated spreadsheets (your Top 8 St2 personal log, the St2 Leaderboard and All Class Leaderboard):

[BrockDM]

Originally Posted by Max Well

Congratulations to BrockDM as he retakes the St2 Lead spot and reaches another PB!

It takes a huge amount of time, effort and expense to reach the times and speeds you and others here are achieving - much appreciation for the hard work and excellent documentation!

Attaching the updated spreadsheets (your Top 8 St2 personal log, the St2 Leaderboard and All Class Leaderboard):

I greatly appreciate it! I love analyzing all of the runs in one place so your efforts as well don't go unnoticed!

[Max Well]

Originally Posted by BrockDM

I greatly appreciate it! I love analyzing all of the runs in one place so your efforts as well don't go unnoticed!

Thanks!

Still looking for Stock Non-Comp entries (F97 or F98) to complete our Leaderboards. Would encourage anyone with a non-comp model to try a day at a Strip. Its an inexpensive and enjoyable way to safely run fast and see what these thoroughbreds can do, and it doesn't require new brake pads, flushing the lines, or changing tires after the day. Just do some basic reading on what your local Strips require (helmet, don't run the A/C so you're not dropping water on the lane, basic Strip etiquette, etc), and you'll experience what many of us have - everyone there enjoys fast cars and readily helps others with questions at the 'All Welcome Test and Tune' days.

And just like other sports - your times are only being compared to others in your own class. I keep trying to get an extra 0.006 sec out of my ET so I can take over goldfz8's top SC spot, but I closely follow the higher classes to see what they can run and what's possible.

I'm happy to prep your own personal log as I've done for others here, so hopefully we can get the SNC Class up and running.

[Jnat]

Quite frankly the problem some of us are having in South NJ is our two local tracks have closed over the last few years (Raceway Park and now Atco) so getting to a track isn't as easy as it once was. Island is pretty far for us south Jersey folk, Maple Grove and Maryland aren't around the corner. Really stinks! Some of us are resorting to street draggy times...

[Max Well]

We finally have a complete All Class Leaderboard and a new SNC Leader as dunny shared his track day slips in his recent thread - https://x3.xbimmers.com/forums/showthread.php?t=2061082 . I placed his personal log of the six runs there, but here are the new All Class and SNC Class Leaderboard spreadsheets.