Coding made Easy: A step by step procedure

sirk77 · 01-12-2017, 03:03 PM

Did anyone code RTTI with CIC?
Does it work in EU?
I found only instruction as below(not checked yet):
"
HU-CIC
3000 > NAVI_TRAFFIC_INFO_MAP > aktiv
3002 > TI_CA_TMC > aktiv
3002 > TI_TMC_REGIONAL > aktiv
3002 > TI_VINFO > aktiv
3002 > TI_FALLBACK_DISABLED > akt iv

http://f30.bimmerpost.com/forums/sho...d.php?t=924464

"
ARTTI as I assume works only with NBT!

Almaretto · 01-12-2017, 03:20 PM

Quote:

Originally Posted by sirk77

Did anyone code RTTI with CIC?
Does it work in EU?
I found only instruction as below(not checked yet):
"
HU-CIC
3000 > NAVI_TRAFFIC_INFO_MAP > aktiv
3002 > TI_CA_TMC > aktiv
3002 > TI_TMC_REGIONAL > aktiv
3002 > TI_VINFO > aktiv
3002 > TI_FALLBACK_DISABLED > akt iv

http://f30.bimmerpost.com/forums/sho...d.php?t=924464

"
ARTTI as I assume works only with NBT!

There are multiple versions

6UH Traffic Information (MY'13 NBT had this)
6AM Real-time Traffic Info (MY'16 NBT's have this; can also be on HU_NBT2 with 4G)
- Active BMW ConnectedDrive & Apps (6AK, 6AC, 6AE Required)
- Added Online Option

RTTI in the CIC works via RDS not via Assist

diablow16 · 01-13-2017, 10:02 PM

Shawn,
Can you please send me info for pszdata full? I am looking to flash the firmware on some ECUs.

Thanks

shawnsheridan · 01-13-2017, 11:00 PM

Quote:

Originally Posted by diablow16

Shawn,
Can you please send me info for pszdata full? I am looking to flash the firmware on some ECUs.

Thanks

PM sent.

sirk77 · 01-14-2017, 10:42 AM

i have coded as below but no any traffic information is available

i will try to add 6UH and code again!

Quote:

Originally Posted by sirk77

Did anyone code RTTI with CIC?
Does it work in EU?
I found only instruction as below(not checked yet):
"
HU-CIC
3000 > NAVI_TRAFFIC_INFO_MAP > aktiv
3002 > TI_CA_TMC > aktiv
3002 > TI_TMC_REGIONAL > aktiv
3002 > TI_VINFO > aktiv
3002 > TI_FALLBACK_DISABLED > akt iv

http://f30.bimmerpost.com/forums/sho...d.php?t=924464

"
ARTTI as I assume works only with NBT!

jjacke · 01-23-2017, 04:19 PM

For what it's worth, I decided to forego the trouble of having to fumble with software, buy cables, and cross my fingers when making a change. I made the decision to buy remote coding from bimmer-tech.net . You enter your car's VIN and they present you with the services they can remotely program on your specific vehicle. All services are A La Carte so you only pay for the ones you want. They are reasonably priced and it worked like a champ. I know I sound like a commercial but I highly recommend them.

Here's a link: https://www.bimmer-tech.net/bmw-idrive-coding/

coolmex200 · 01-25-2017, 12:49 PM

Quote:

Originally Posted by sirk77

i have coded as below but no any traffic information is available

i will try to add 6UH and code again!

Quote:

Originally Posted by sirk77

Did anyone code RTTI with CIC?
Does it work in EU?
I found only instruction as below(not checked yet):
"
HU-CIC
3000 > NAVI_TRAFFIC_INFO_MAP > aktiv
3002 > TI_CA_TMC > aktiv
3002 > TI_TMC_REGIONAL > aktiv
3002 > TI_VINFO > aktiv
3002 > TI_FALLBACK_DISABLED > akt iv

http://f30.bimmerpost.com/forums/sho...d.php?t=924464

"
ARTTI as I assume works only with NBT!

I can't find the option for BT_data_service under HU_NBT

Any ideas?

coolmex200 · 01-25-2017, 02:22 PM

Quote:

Originally Posted by sirk77

I am trying to add BMW LIVE(I do not need INTERNET) to my X3 but so far without success!

my VO:
1CA,1CC,1CD,216,223,230,248,249,258,2K8,2PA,2TB,2V G,
2XA,302,316,319,322,358,3AT,3XL,402,420,423,428,43 0,
431,459,465,481,488,493,494,4CH,502,508,520,521,52 2,
524,534,544,548,563,5AC,5DA,609,610,677,696,698, 6AL(was added),
6NK,6VC,863,877,8A1,8AT,8KA,8TL,8TN,925

i have coded:
CONNECTED_DRIVE->aktiv
ONLINE_BROWSER_LIVE->aktiv
ONLINE_BROWSER = nur_bmw_internet_aktiv
DUN_PROFILE->aktiv
PAN_PROFILE->aktiv
BT_DATA_SERVICE - Aktiv

during switching on BMW LIVE from MENU i have message: "Activate data services for Bluetooth device or contact Service"

btw during phone(SONY M4) pairing i do not have any option for bluetooth data transfer, only PHONE and AUDIO!

any idea how to solve it

================================================== ===========
SOLVED
================================================== ===========
during adding 6AL i missed ECU coding, NOW Bmw Live is working...

Hi,
I tried following your directions, but can't find BT_data_services anywhere. What module did you code? I added the 6AL and VO coded HU_NBT. Then tried to FDL CODE The stuff in your post, but no luck with BT.

coolmex200 · 01-26-2017, 01:53 PM

Quote:

Originally Posted by sirk77

I am trying to add BMW LIVE(I do not need INTERNET) to my X3 but so far without success!

my VO:
1CA,1CC,1CD,216,223,230,248,249,258,2K8,2PA,2TB,2V G,
2XA,302,316,319,322,358,3AT,3XL,402,420,423,428,43 0,
431,459,465,481,488,493,494,4CH,502,508,520,521,52 2,
524,534,544,548,563,5AC,5DA,609,610,677,696,698, 6AL(was added),
6NK,6VC,863,877,8A1,8AT,8KA,8TL,8TN,925

i have coded:
CONNECTED_DRIVE->aktiv
ONLINE_BROWSER_LIVE->aktiv
ONLINE_BROWSER = nur_bmw_internet_aktiv
DUN_PROFILE->aktiv
PAN_PROFILE->aktiv
BT_DATA_SERVICE - Aktiv

during switching on BMW LIVE from MENU i have message: "Activate data services for Bluetooth device or contact Service"

btw during phone(SONY M4) pairing i do not have any option for bluetooth data transfer, only PHONE and AUDIO!

any idea how to solve it

================================================== ===========
SOLVED
================================================== ===========
during adding 6AL i missed ECU coding, NOW Bmw Live is working...

Hi,
I tried following your directions, but can't find BT_data_services anywhere. What module did you code? I added the 6AL and VO coded HU_NBT. Then tried to FDL CODE The stuff in your post, but no luck with BT.

sirk77 · 01-28-2017, 02:43 PM

i have CIC, i do not know how it works for NBT.
After adding 6AL i have coded CIC only.

pej7445 · 01-29-2017, 08:14 AM

Quote:

Originally Posted by shawnsheridan

PM sent.

Shawn, would you please send me a link to the latest E-Sys Launcher, and PSdZData?
Thank you!

pej7445 · 01-29-2017, 08:20 AM

All the elements are on the cheat sheet I have, but saving the changes to the module fails. If memory serves is was the ACSM module that I couldn't get the update to work with. Perhaps I'll give it another shot with the latest software. It's been over a year since I tried.

Again, these are the items I'm trying to code;
1. Disabling the welcome gong(s).
2. Disabling the seat-belt alerts/gong(s).
3. Enabling the Cruise "active" by default whenever the car is started.

2016 F25

shawnsheridan · 01-29-2017, 08:25 AM

Quote:

Originally Posted by pej7445

Shawn, would you please send me a link to the latest E-Sys Launcher, and PSdZData?
Thank you!

PM sent.

Jay Cee · 01-29-2017, 07:43 PM

Quote:

Originally Posted by jjacke

For what it's worth, I decided to forego the trouble of having to fumble with software, buy cables, and cross my fingers when making a change. I made the decision to buy remote coding from bimmer-tech.net . You enter your car's VIN and they present you with the services they can remotely program on your specific vehicle. All services are A La Carte so you only pay for the ones you want. They are reasonably priced and it worked like a champ. I know I sound like a commercial but I highly recommend them.

Here's a link: https://www.bimmer-tech.net/bmw-idrive-coding/

Flashy website for sure but I tried both versions of my VIN: last 7 and full, and it said it was incorrect! No it isn't!

Almaretto · 01-30-2017, 03:24 AM

Quote:

Originally Posted by pej7445

All the elements are on the cheat sheet I have, but saving the changes to the module fails. If memory serves is was the ACSM module that I couldn't get the update to work with. Perhaps I'll give it another shot with the latest software. It's been over a year since I tried.

Again, these are the items I'm trying to code;
1. Disabling the welcome gong(s).
2. Disabling the seat-belt alerts/gong(s).
3. Enabling the Cruise "active" by default whenever the car is started.

2016 F25

Can you elaborate on how it fails? Did you get any error messages?

ACSM for the first two.

I have never seen #3. How would that work? You start car and it automatically begins to move and reach target speed?

PerryGunn · 01-30-2017, 05:21 AM

Quote:

Originally Posted by Jay Cee

Flashy website for sure but I tried both versions of my VIN: last 7 and full, and it said it was incorrect! No it isn't!

Does exactly the same for me.... I even went and checked the VIN in case I was typing it wrong...

PerryGunn · 01-30-2017, 05:29 AM

Quote:

Originally Posted by Almaretto

Quote:

Originally Posted by pej7445

Again, these are the items I'm trying to code;
3. Enabling the Cruise "active" by default whenever the car is started.

I have never seen #3. How would that work? You start car and it automatically begins to move and reach target speed?

That'd be sure to create a lot of insurance claims....

I may be wrong, I often am, but I interpreted #3 as cruise being activated in the 'ready to set speed' mode rather than the 'resume speed' mode - but I've never seen anything that indicates it's possible

Jay Cee · 01-30-2017, 10:43 AM

Just checked it again, VIN is recognised now, must've been an out of hours issue.

raheelc · 01-30-2017, 03:46 PM

Hi,

Looking to code some features in my 2013 X3. Could someone please pm me the links to the most up-to-date software, guides, etc?

Much appreciated!

shawnsheridan · 01-30-2017, 04:23 PM

Quote:

Originally Posted by raheelc

Hi,

Looking to code some features in my 2013 X3. Could someone please pm me the links to the most up-to-date software, guides, etc?

Much appreciated!

PM sent.

X3dave · 01-31-2017, 03:12 PM

Hi all, I am wondering if anyone has ever looked in the making the FCW more sensitive, giving earlier visual and audible warning time. I'm also wondering if there is a way to make the steering wheel vibrate for FCW as it does when LDW kicks in. Thanks in advance.

Almaretto · 01-31-2017, 03:36 PM

Quote:

Originally Posted by X3dave

Hi all, I am wondering if anyone has ever looked in the making the FCW more sensitive, giving earlier visual and audible warning time. I'm also wondering if there is a way to make the steering wheel vibrate for FCW as it does when LDW kicks in. Thanks in advance.

I have only looked into disabling. Personally, I have mine set at medium or late warning because I find early too sensitive. I also disabled LDW, but like blind spot detection.

01-12-2017, 03:03 PM	#2113
sirk77 New Member 0 Rep 18 Posts Drives: F25 LCI 20d Join Date: Feb 2016 Location: PL iTrader: (0)	Did anyone code RTTI with CIC? Does it work in EU? I found only instruction as below(not checked yet): " HU-CIC 3000 > NAVI_TRAFFIC_INFO_MAP > aktiv 3002 > TI_CA_TMC > aktiv 3002 > TI_TMC_REGIONAL > aktiv 3002 > TI_VINFO > aktiv 3002 > TI_FALLBACK_DISABLED > akt iv http://f30.bimmerpost.com/forums/sho...d.php?t=924464 " ARTTI as I assume works only with NBT!
	Appreciate 0 Quote

01-13-2017, 10:02 PM	#2115
diablow16 Enlisted Member 18 Rep 38 Posts Drives: 2009 E92 335i 6MT Join Date: Jul 2014 Location: Saint Louis iTrader: (0)	Shawn, Can you please send me info for pszdata full? I am looking to flash the firmware on some ECUs. Thanks
	Appreciate 0 Quote

01-23-2017, 04:19 PM	#2118
jjacke New Member 0 Rep 7 Posts Drives: 2012 328i xDrive Coupe Join Date: Mar 2015 Location: Middletown, NY iTrader: (0)	Coding made easy For what it's worth, I decided to forego the trouble of having to fumble with software, buy cables, and cross my fingers when making a change. I made the decision to buy remote coding from bimmer-tech.net . You enter your car's VIN and they present you with the services they can remotely program on your specific vehicle. All services are A La Carte so you only pay for the ones you want. They are reasonably priced and it worked like a champ. I know I sound like a commercial but I highly recommend them. Here's a link: https://www.bimmer-tech.net/bmw-idrive-coding/
	Appreciate 0 Quote

01-28-2017, 02:43 PM	#2122
sirk77 New Member 0 Rep 18 Posts Drives: F25 LCI 20d Join Date: Feb 2016 Location: PL iTrader: (0)	i have CIC, i do not know how it works for NBT. After adding 6AL i have coded CIC only.
	Appreciate 0 Quote

01-29-2017, 08:20 AM	#2124
pej7445 Second Lieutenant 98 Rep 224 Posts Drives: 2019 X3 m40i Join Date: Dec 2013 Location: Asheville, NC iTrader: (0) Garage List 2019 x3 m40i [0.00]	All the elements are on the cheat sheet I have, but saving the changes to the module fails. If memory serves is was the ACSM module that I couldn't get the update to work with. Perhaps I'll give it another shot with the latest software. It's been over a year since I tried. Again, these are the items I'm trying to code; 1. Disabling the welcome gong(s). 2. Disabling the seat-belt alerts/gong(s). 3. Enabling the Cruise "active" by default whenever the car is started. 2016 F25
	Appreciate 0 Quote

01-30-2017, 10:43 AM	#2130
Jay Cee New Member 0 Rep 8 Posts Drives: 2013 F25 X3 xDrive 20D M Sport Join Date: Dec 2016 Location: North Lincolnshire, UK iTrader: (0)	Just checked it again, VIN is recognised now, must've been an out of hours issue.
	Appreciate 0 Quote

01-30-2017, 03:46 PM	#2131
raheelc New Member 2 Rep 5 Posts Drives: 2013 BMW X3 xDrive 28i Join Date: Oct 2016 Location: Northern Virginia iTrader: (0)	Hi, Looking to code some features in my 2013 X3. Could someone please pm me the links to the most up-to-date software, guides, etc? Much appreciated!
	Appreciate 0 Quote

01-31-2017, 03:12 PM	#2133
X3dave Registered 0 Rep 4 Posts Drives: X3 Join Date: Oct 2016 Location: Former NY'er iTrader: (0)	Hi all, I am wondering if anyone has ever looked in the making the FCW more sensitive, giving earlier visual and audible warning time. I'm also wondering if there is a way to make the steering wheel vibrate for FCW as it does when LDW kicks in. Thanks in advance.
	Appreciate 0 Quote