[mxr252]

hello, I would like to request the latest Esys software and psdzdata.
i have x3 2014 F25 28i

Thanks in advance

[shawnsheridan]

Originally Posted by mxr252

hello, I would like to request the latest Esys software and psdzdata.
i have x3 2014 F25 28i

Thanks in advance

PM sent.

[Araemo]

Is the 'full back up' procedure in the first post still 100% correct?

Given that it is 2-4 years old, I want to verify that is still all you need to do to back up your original config before starting to code.

[Almaretto]

Originally Posted by Araemo

Is the 'full back up' procedure in the first post still 100% correct?

Given that it is 2-4 years old, I want to verify that is still all you need to do to back up your original config before starting to code.

Just copy and paste CAF folder.

[Araemo]

Originally Posted by Almaretto

Just copy and paste CAF folder.

What about the FA and SVT steps?

[PerryGunn]

I currently have a Sept 2014 F25 and have successfully coded it, but have a new F25 on order with build due soon and delivery due in December

E-Sys version 3.23.4b(build 36359)
psdzdata version 53.5

Do I need a newer version of E-Sys or psdzdata or will the older version still work?

Thank you

[shawnsheridan]

Originally Posted by PerryGunn

I currently have a Sept 2014 F25 and have successfully coded it, but have a new F25 on order with build due soon and delivery due in December

E-Sys version 3.23.4b(build 36359)
psdzdata version 53.5

Do I need a newer version of E-Sys or psdzdata or will the older version still work?

Thank you

You need latest. PM sent.

[PerryGunn]

Originally Posted by shawnsheridan

You need latest. PM sent.

[Almaretto]

Originally Posted by Araemo

What about the FA and SVT steps?

From my Getting Started Guide:

• E-sys Vehicle Files Backup:
  • CAFDS or NCD's:
    • “Reading Coding Data” (automatically) → processed car data in the form of an *.ncd's file (C:\data\CAF).
    • Prior to saving FDL-editor changes or “Reading Coding Data,” move or copy these files to another location; otherwise, files with the same name will be overwritten
    • Though, VO Coding is what is used to revert changes back to factory
  • Fahrzeugauftrag (FA) & Software Variant Table (SVT) Tree
    • FA's (C:\data\FA) & SVT's (C:\data\SVT), comparatively, must be manually saved after read from vehicle. So, the only risk of overwriting them is if you select "Save" and use same name.
    • FA's only change if you write FA changes to Vehicle Configuration Management (VCM) & SVT if vehicle is flash programmed to higher I-Step.
    • You only need backup if you want to load offline for some reason.

[dtcoff]

I have coded my F22 M235i previously and tried to do same to my F25 X3.

I can't find the FEM_BODY module for F25 though. I was looking for the functions that turns off the radio when door is opened (TCM_LOGIC_R_OFF_DOOR) and to change the number of indicator blinks on indicator touch (Blinkzyklen_anzahl_tip).

[Almaretto]

Originally Posted by dtcoff

I have coded my F22 M235i previously and tried to do same to my F25 X3.

I can't find the FEM_BODY module for F25 though. I was looking for the functions that turns off the radio when door is opened (TCM_LOGIC_R_OFF_DOOR) and to change the number of indicator blinks on indicator touch (Blinkzyklen_anzahl_tip).

F25 shares ECU's with an F10. Look in FRM and CAS.

Fem_Body only found in F20/ F30/ F80.

[shawnsheridan]

Originally Posted by dtcoff

I have coded my F22 M235i previously and tried to do same to my F25 X3.

I can't find the FEM_BODY module for F25 though. I was looking for the functions that turns off the radio when door is opened (TCM_LOGIC_R_OFF_DOOR) and to change the number of indicator blinks on indicator touch (Blinkzyklen_anzahl_tip).

F25 has CAS and FRM for those functions instead of FEM_BODY, although it is TC_LOGIC_KLR_OFF_DOOR in CAS and coding Blinkzyklen_anzahl_tip in FRM does not work.

[dtcoff]

Originally Posted by shawnsheridan

F25 has CAS and FRM for those functions instead of FEM_BODY, although it is TC_LOGIC_KLR_OFF_DOOR in CAS and coding Blinkzyklen_anzahl_tip in FRM does not work.

thanks, that worked fine. Strange that there is no way to change the number of indicator blinks on these models.

[Almaretto]

Originally Posted by dtcoff

thanks, that worked fine. Strange that there is no way to change the number of indicator blinks on these models.

I find it strange when function parameters are present, but do not work. But, somethings are controlled on a deeper level by firmware.

It is just one of those things, where only BMW knows why, like only HU_CIC gets weatherband and F10/F25 can have automatic HBA. But, at least HUD blinkers work.

[shawnsheridan]

Originally Posted by dtcoff

thanks, that worked fine. Strange that there is no way to change the number of indicator blinks on these models.

Yeah, but that is just how it has been since 2010, and no F1x/F25 can change the number of blinks.

[ThomasR]

I have an F25 with a 2015-01-12 production date with 609 and 655. Is there a flash to add Album Artwork to SiriusXM? I have station artwork. Thanks.

[Almaretto]

Originally Posted by ThomasR

I have an F25 with a 2015-01-12 production date with 609 and 655. Is there a flash to add Album Artwork to SiriusXM? I have station artwork. Thanks.

Only way to get is with hardware change to HU_NBT2.

[ThomasR]

Originally Posted by Almaretto

Only way to get is with hardware change to HU_NBT2.

Is that doable?

[Almaretto]

Originally Posted by ThomasR

Is that doable?

Expensive, but yes.

[hoho_leung]

I just got the cable, but no software. Any where I can download the proper software? Mine is 2014 x3.

Thanks.

[Almaretto]

Originally Posted by hoho_leung

I just got the cable, but no software. Any where I can download the proper software? Mine is 2014 x3.

Thanks.

PM Sent

[Lotus99]

Hey guys, ok, dumb question I'm sure for you experts rather than reading 2000 posts...

For coding, is going the route suggested in this thread the same basically as getting a Carly adapter and app? Are there advantages going with a cable over the Carly setup? Cost? More features?

Thanks for the help!