[JohnAG]

Hi Shawn. I'm interested in coding my newly acquired 2016 28I MSport. I read the first instructions by April on what you need and how to set up, but it is 3 years old and I feel that some steps need to be expounded on. Following are my questions:

1. Where do I buy the ENET cable?

2. Where is the OBD connector located in the car?

3. Is there already a Mac version of the needed software (E-sys) and what is the most current software version?

4. Where do I get the psdzdata?

I hope you don't mind me too much asking these fundamental questions. I'm sure they've already been asked before, but the task of combing through 78 pages of the forum is daunting to me. Thanks.

[shawnsheridan]

Originally Posted by JohnAG

Hi Shawn. I'm interested in coding my newly acquired 2016 28I MSport. I read the first instructions by April on what you need and how to set up, but it is 3 years old and I feel that some steps need to be expounded on. Following are my questions:

1. Where do I buy the ENET cable?

2. Where is the OBD connector located in the car?

3. Is there already a Mac version of the needed software (E-sys) and what is the most current software version?

4. Where do I get the psdzdata?

I hope you don't mind me too much asking these fundamental questions. I'm sure they've already been asked before, but the task of combing through 78 pages of the forum is daunting to me. Thanks.

1) Any ENET Cable off eBay or Amazon should work.
2) Driver's side under dash near trunk Release.
3) No. For Mac, must use Bootcamp or Parallels.
4) PM sent.

[JohnAG]

Tbanks shawn!

[voipwizard]

Coded the TPMS and removed the disclaimers on startup and reverse.
Just only one panic moment when i hit something and it started coding the car...

All is well

the only thing I can say is "READ THE F%^&ING INSTRUCTIONS!!! They are spot on!!!"


Question: what can I use to see fault codes / reset them etc with my existing ENET cable? Some people talks about ISTA?

Thanks

[shawnsheridan]

Originally Posted by voipwizard

...Question: what can I use to see fault codes / reset them etc with my existing ENET cable? Some people talks about ISTA?

Thanks

Clear Fault Codes:

With E-Sys:

Click "External Applications" in the left menu.
Click "External Application"
Double-click "Transmitter"
Scroll to the bottom and click "14 FF FF FF,31 01 0F 06,31 01 40 00 00,31 01 40 00 05,31 01 40 00 01;Clear all DTCs (clear DTC,clear Infospeicher,ZFS – DM_Lock,clear ZFS – DM_Clear,ZFS – DM_Unlock)"
Click Connect
Click Send

Or with Tool32:

Launch C:\EDIABAS\Bin\TOOL32.EXE
Hit F3
Load C:\EDIABAS\Ecu\F01.PRG
In the "Select Job: F01" window, select FS_LOESCHEN_FUNKTIONAL
Hit F5
"Results" window should show "JOB_STATUS = OKAY"

Note: fs_lesen_funktional only read fault codes, FS_LOESCHEN_FUNKTIONAL will delete it.

[kucha12]

Hi Shawn, just bought 2014 X3 and want to try coding. Got the cable off eBay already. Would you please let me know where I can find links to software and instructions to start coding. Thanks.

[shawnsheridan]

Originally Posted by kucha12

Hi Shawn, just bought 2014 X3 and want to try coding. Got the cable off eBay already. Would you please let me know where I can find links to software and instructions to start coding. Thanks.

PM sent.

[lubrax]

Hi Shawn, already got the cable from ebay and it came with E-sys 3.23.4 and pszdata 50.3 Already tried a dozen times to install following different turorials but cant get it on. Can you please send me the links with recent working software? Thanks.

[shawnsheridan]

Originally Posted by lubrax

Hi Shawn, already got the cable from ebay and it came with E-sys 3.23.4 and pszdata 50.3 Already tried a dozen times to install following different turorials but cant get it on. Can you please send me the links with recent working software? Thanks.

PM sent.

[Jacob46]

Good evening,
I've just purchased the ENET cable. I'm also dying to get coding. Any chance that I can get what I need to start coding? My F10 is waiting for it ))

Thanks in advance!

[shawnsheridan]

Originally Posted by Jacob46

Good evening,
I've just purchased the ENET cable. I'm also dying to get coding. Any chance that I can get what I need to start coding? My F10 is waiting for it ))

Thanks in advance!

PM sent.

[danilokr]

ciao shawnsheridan,can you help me to start coding to do I have a x3 December 2010 , thanks in advance

[shawnsheridan]

Originally Posted by danilokr

ciao shawnsheridan,can you help me to start coding to do I have a x3 December 2010 , thanks in advance

You cannot send or receive PM's yet. Send me one when you can.

[danilokr]

Originally Posted by shawnsheridan

You cannot send or receive PM's yet. Send me one when you can.

danilogallokr@libero.it

[shawnsheridan]

Originally Posted by danilokr

danilogallokr@libero.it

Your PM is working now.

PM sent.

[adamdmc13]

hey Shawn, me too!
I recently purchased a 2013 X3 28i (F25). Please send me all the stuff I need to get started! Thanks!

[DaveTheNerd]

Hi Shawn. I need to re-program my 2011 X3 after they reset it in the shop and it's been... a while. Mind sending me over the instructions again? You rock for all that you do.

[shawnsheridan]

Originally Posted by adamdmc13

hey Shawn, me too!
I recently purchased a 2013 X3 28i (F25). Please send me all the stuff I need to get started! Thanks!

Originally Posted by DaveTheNerd

Hi Shawn. I need to re-program my 2011 X3 after they reset it in the shop and it's been... a while. Mind sending me over the instructions again? You rock for all that you do.

PM's sent.

[w5xz]

hi Shawn, X-3 newbie; please advise current status. thanks!

[shawnsheridan]

Originally Posted by w5xz

hi Shawn, X-3 newbie; please advise current status. thanks!

PM sent.

[M3Rocket]

Hey Shawn!

Just got a 2014 F25 added to the family. Also have a 2012 E92 M3. Can you please PM me with what I need to start?

[shawnsheridan]

Originally Posted by M3Rocket

Hey Shawn!

Just got a 2014 F25 added to the family. Also have a 2012 E92 M3. Can you please PM me with what I need to start?

Two completely different animals there. Different cables, and different software.

PM sent.