Coding made Easy: A step by step procedure

TonyX3driver · 06-12-2015, 10:28 PM

Quote:

Originally Posted by shawnsheridan

You must update.

PM sent.

thank you Shawn. working on...

TonyX3driver · 06-13-2015, 08:44 AM

Quote:

Originally Posted by TonyX3driver

thank you Shawn. working on...

Shawn,

all installed with no errors, followed your v.10, but see CAFD's without descriptions. Did i something wrong? You say:
"Launcher Premium 2.x uses historical CAFD data from older Untrimmed PSdZData releases to dynamically map the trimmed data back into E-Sys."
Buit how is it done?
I made installation to the new laptop, not with previous E-sys. Can this reason?
How it work work with those "historical"CAFD??
Thank you.

shawnsheridan · 06-13-2015, 08:46 AM

Quote:

Originally Posted by TonyX3driver

Shawn,

all installed with no errors, followed your v.10, but see CAFD's without descriptions. Did i something wrong? You say:
"Launcher Premium 2.x uses historical CAFD data from older Untrimmed PSdZData releases to dynamically map the trimmed data back into E-Sys."
Buit how is it done?
I made installation to the new laptop, not with previous E-sys. Can this reason?
How it work work with those "historical"CAFD??
Thank you.

You do not have E-Sys Launcher set for Car Series = F25.

TonyX3driver · 06-13-2015, 08:53 AM

Quote:

Originally Posted by shawnsheridan

You do not have E-Sys Launcher set for Car Series = F25.

ha It saying F999 and must wait 2 days for change.
So if i wait 2 days will change and must be ok?

shawnsheridan · 06-13-2015, 08:59 AM

Quote:

Originally Posted by TonyX3driver

ha It saying F999 and must wait 2 days for change.
So if i wait 2 days will change and must be ok?

Yes, or get Pro version from TokenMaster, which does not have this restriction.

TonyX3driver · 06-13-2015, 11:21 AM

Quote:

Originally Posted by shawnsheridan

Yes, or get Pro version from TokenMaster, which does not have this restriction.

I will work on it next weekend anyway.
thank you

nkcavs23 · 06-15-2015, 03:47 PM

Top things I want to do:

-Auto off iDrive when ignition button is pushed once instead of twice/doors locked
-Auto wipers on by default
-Ability to close rear hatch (turn into a toggle rather than just open)
-Disable warning on iDrive when turning on car initially
-Ability to watch DVDs/Media while car is in motion

I am new to coding, could someone tell me if these things are achievable/documented before I start digging in?

Thanks!

akshay1234 · 06-16-2015, 08:57 AM

Quote:

Originally Posted by nkcavs23

Top things I want to do:

-Auto off iDrive when ignition button is pushed once instead of twice/doors locked
-Auto wipers on by default
-Ability to close rear hatch (turn into a toggle rather than just open)
-Disable warning on iDrive when turning on car initially
-Ability to watch DVDs/Media while car is in motion

I am new to coding, could someone tell me if these things are achievable/documented before I start digging in?

Thanks!

For the first one, I think you can code the idrive to go off when you open the drivers door, instead of pushing the button twice/locking the car.

Auto wipers on by default I don't think is possible.

The rest are very much doable.

zzz · 06-16-2015, 09:13 AM

I searched the thread but did not seem to find it. I am able to fold side mirrors by holding the key lock button, but then this starts closing the roof as well. Is it possible to code mirrors to always fold with lock (short press)?

shawnsheridan · 06-16-2015, 09:27 AM

Quote:

Originally Posted by zzz

I searched the thread but did not seem to find it. I am able to fold side mirrors by holding the key lock button, but then this starts closing the roof as well. Is it possible to code mirrors to always fold with lock (short press)?

Set KMFRT_SCHLIESSEN Werte value to 00.

nkcavs23 · 06-18-2015, 09:39 AM

Quote:

Originally Posted by akshay1234

For the first one, I think you can code the idrive to go off when you open the drivers door, instead of pushing the button twice/locking the car.

Auto wipers on by default I don't think is possible.

The rest are very much doable.

Thanks for the follow up. Is there a repo where you can pick and choose the mods you want? or is it all to be done manually

akshay1234 · 06-19-2015, 01:12 PM

Quote:

Originally Posted by nkcavs23

Thanks for the follow up. Is there a repo where you can pick and choose the mods you want? or is it all to be done manually

I don't think I got what you meant, but you have to do each code manually, one ECU at a time and by changing the values needed.

RolaNoCalhau · 06-20-2015, 05:16 PM

Does any one knows how to unblock internet access when driving?
I have already succeeded the same with DVD in motion which I thought would be the same for internet but it isn't.
Tks in advance

shawnsheridan · 06-20-2015, 07:58 PM

Quote:

Originally Posted by RolaNoCalhau

Does any one knows how to unblock internet access when driving?
I have already succeeded the same with DVD in motion which I thought would be the same for internet but it isn't.
Tks in advance

There isn't one. This cannot be coded.

RolaNoCalhau · 06-21-2015, 03:47 AM

Quote:

Originally Posted by shawnsheridan

There isn't one. This cannot be coded.

That's a pity...
Thank you Shawn once again.

TonyX3driver · 06-21-2015, 04:33 PM

Quote:

Originally Posted by shawnsheridan

Yes, or get Pro version from TokenMaster, which does not have this restriction.

Hi Shawn, car coded, no any problem. All is back as before dealer taken for steering rack exchange.

Now, I need to move forward with my next prject. As i mentioned before- HKFM retrofit.
I have all the hardware now. Preparing wiring looms. Befor I start building, I'm not sure yet about SW integration.

Have read this:
http://www.bimmerfest.com/forums/sho....php?p=8597341

But situation is still not much clear for me.
Do you please have more info for me how to safely integrate HKFM module??
I have this one already used part:

shawnsheridan · 06-21-2015, 04:37 PM

Quote:

Originally Posted by TonyX3driver

Hi Shawn, car coded, no any problem. All is back as before dealer taken for steering rack exchange.

Now, I need to move forward with my next prject. As i mentioned before- HKFM retrofit.
I have all the hardware now. Preparing wiring looms. Befor I start building, I'm not sure yet about SW integration.

Have read this:
http://www.bimmerfest.com/forums/sho....php?p=8597341

But situation is still not much clear for me.
Do you please have more info for me how to safely integrate HKFM module??
I have this one already used part:

Install module / hardware, update FA with S316A automatic trunk lid mechanism, write FA to car, flash and encode HKFM.

TonyX3driver · 06-21-2015, 04:59 PM

Quote:

Originally Posted by shawnsheridan

Install module / hardware, update FA with S316A automatic trunk lid mechanism, write FA to car, flash and encode HKFM.

Ok, with FA.
But to flash- I'm now with E-sys 3.24 and PSdZ 55.4 without flash files.
Also have stored my historical 54.1 Full. Will it work if I just replace it in :\Data folder?
I have saved procedure fro m you when I flashed Kombi 3 months ago. Will it work the same way??
Thank you.

shawnsheridan · 06-21-2015, 10:15 PM

Quote:

Originally Posted by TonyX3driver

Ok, with FA.
But to flash- I'm now with E-sys 3.24 and PSdZ 55.4 without flash files.
Also have stored my historical 54.1 Full. Will it work if I just replace it in :\Data folder?
I have saved procedure fro m you when I flashed Kombi 3 months ago. Will it work the same way??
Thank you.

54.1 Full is probably fine. Just replace current psdzdata folder with 54.1 Full psdzdata folder.

Flash process is the same, except, I-Step Shipment used for Flash TAL for this new module is not known, as it likely is not the same as your original car's I-Step Shipment. You may have to try several until you have the correct one. You will know it is right when HWEL after SVT_soll calculation is Black (not Red / Blue).

TonyX3driver · 06-22-2015, 12:41 AM

Quote:

Originally Posted by shawnsheridan

54.1 Full is probably fine. Just replace current psdzdata folder with 54.1 Full psdzdata folder.

Flash process is the same, except, I-Step Shipment used for Flash TAL for this new module is not known, as it likely is not the same as your original car's I-Step Shipment. You may have to try several until you have the correct one. You will know it is right when HWEL after SVT_soll calculation is Black (not Red / Blue).

Ok, will go on and let you know

temoore48 · 06-22-2015, 10:32 AM

Shawn, really appreciate your efforts. I have coded a handfull of items, but have one that I would like to do, but can't seem to get to work. I want to change the number of blinks for "touching" the turn signal stalk from 3 to 5.
In the FRM section, there is BLINKZYKLEN_ANZAHL_TIPP, which is supposedly the number of flashes +1. I have set werte=04, and updated. When I re read, it is set to 04, but still only flashes 3 times. Any suggestions? Thanks.

shawnsheridan · 06-22-2015, 10:35 AM

Quote:

Originally Posted by temoore48

Shawn, really appreciate your efforts. I have coded a handfull of items, but have one that I would like to do, but can't seem to get to work. I want to change the number of blinks for "touching" the turn signal stalk from 3 to 5.
In the FRM section, there is BLINKZYKLEN_ANZAHL_TIPP, which is supposedly the number of flashes +1. I have set werte=04, and updated. When I re read, it is set to 04, but still only flashes 3 times. Any suggestions? Thanks.

It does not work in F10/F25.

06-15-2015, 03:47 PM	#1569
nkcavs23 New Member 8 Rep 29 Posts Drives: 2014 BMW X3 xDrive35i Join Date: Jun 2015 Location: Ohio iTrader: (0)	Top things I want to do: -Auto off iDrive when ignition button is pushed once instead of twice/doors locked -Auto wipers on by default -Ability to close rear hatch (turn into a toggle rather than just open) -Disable warning on iDrive when turning on car initially -Ability to watch DVDs/Media while car is in motion I am new to coding, could someone tell me if these things are achievable/documented before I start digging in? Thanks!
	Appreciate 0 Quote

06-16-2015, 09:13 AM	#1571
zzz Private 12 Rep 84 Posts Drives: G31 520i Join Date: Jul 2011 Location: Belgium iTrader: (0)	I searched the thread but did not seem to find it. I am able to fold side mirrors by holding the key lock button, but then this starts closing the roof as well. Is it possible to code mirrors to always fold with lock (short press)? __________________ 520i Touring
	Appreciate 0 Quote

06-20-2015, 05:16 PM	#1575
RolaNoCalhau Private 18 Rep 95 Posts Drives: 2012 520dA Touring Join Date: Jan 2015 Location: Lisbon iTrader: (0)	Does any one knows how to unblock internet access when driving? I have already succeeded the same with DVD in motion which I thought would be the same for internet but it isn't. Tks in advance
	Appreciate 0 Quote

06-22-2015, 10:32 AM	#1583
temoore48 Private 43 Rep 75 Posts Drives: 2022 X5 4.5e Join Date: May 2015 Location: Newcastle, WA iTrader: (0) Garage List 2022 BMW X5 [0.00]	Shawn, thanks for your amazing participation, have question Shawn, really appreciate your efforts. I have coded a handfull of items, but have one that I would like to do, but can't seem to get to work. I want to change the number of blinks for "touching" the turn signal stalk from 3 to 5. In the FRM section, there is BLINKZYKLEN_ANZAHL_TIPP, which is supposedly the number of flashes +1. I have set werte=04, and updated. When I re read, it is set to 04, but still only flashes 3 times. Any suggestions? Thanks.
	Appreciate 0 Quote