[shawnsheridan]

What E-Sys and PSdZData versions are you using?

What Chassis are you connecting to?

What are you selecting as your Target Connection?

[serafim]

first of all many thanks for you time, to help me

I have e-sys 3.18.4
Pzdata is 47.5
I connect F10 Jun2014

[shawnsheridan]

What is June 2014? Is this the Build Date of the F10?

[serafim]

Yes
and i connect sucessful

[shawnsheridan]

Originally Posted by serafim

Yes
and i connect sucessful

Connection means nothing. You cannot use this old E-Sys and PSdZData with this new F10. You need to update both, and you will now need a Token solution.

PM sent.

[Slammer99uk]

Can I too get a link to the correct software please? I am looking to upgrade the maps on my 2013 F30 with Business Nav (Move European)

Regards

S

[shawnsheridan]

Originally Posted by Slammer99uk

Can I too get a link to the correct software please? I am looking to upgrade the maps on my 2013 F30 with Business Nav (Move European)

Regards

S

PM sent.

[ampforeva]

I must have it missed: any solution for retrofitted LED fogs?
Did BMW engineers change coding capabilities with the LCI to avoid lamp check yelling on LEDs?

The headlight is non-adaptive bixenon, if matters.

Thanks!

[jbd528]

I am a newbie to this forum and have been reading about coding our BMWs. I have a 2011 528i and wish to change some of the coding. Can someone PM me the location for the necessary software and tools. Any instructions will be helpful as well.

Thanks in advance!

[CatFlap]

Hi,

I have:

E-Sys 3.24.3 (Build 38445) - 2013-05-22
PSdZ Version 4.8.0. - 20130425-1205

I have just bought a new F15 X5 and would like to code it. Do I need to update my E-Sys / PSdZ?

I can connect to the car though get errors when trying to read coding data from many ECU's though some do read OK.

I have a patched token solution.

Regards,

[shawnsheridan]

Originally Posted by jbd528

I am a newbie to this forum and have been reading about coding our BMWs. I have a 2011 528i and wish to change some of the coding. Can someone PM me the location for the necessary software and tools. Any instructions will be helpful as well.

Thanks in advance!

You can't receive PM yet.

[shawnsheridan]

Originally Posted by CatFlap

Hi,

I have:

E-Sys 3.24.3 (Build 38445) - 2013-05-22
PSdZ Version 4.8.0. - 20130425-1205

I have just bought a new F15 X5 and would like to code it. Do I need to update my E-Sys / PSdZ?

I can connect to the car though get errors when trying to read coding data from many ECU's though some do read OK.

I have a patched token solution.

Regards,

The PSdZData version used must be >= to the last version of ISTA/P used to program the car. If you use the latest PSdZData version, then you don't have to worry about it. Otherwise, you will need to read I-Step current from VCM, cross-reference it to the ISTA/P version, and determine if your PSdZData version is >= to it.

You wrote you have PSdZ Version 4.8.0; however, this is incorrect. The PSdZ Version displayed when you click on E-Sys => Help => About is simply the PSdZ library used in that version of E-Sys, not the PSdZData data files from ISTA/P (e.g. 53.0 PSdZData).

For F15 Coding:

• F15 uses F25 as Target Connection
• Use Read ECU instead of Read SVT.
• F15 has the new BDC (Body Domain Controller) "Super ECU", which is like FEM BODY on steroids. If you can't find a particular FDL Code, look in BDC.
• Make sure under E-Sys => Options => Settings => Program tab => Memory Requirement => RAM is set to 1024 or you will likely be unable to read BDC. Do NOT use anything larger than 1024, or E-Sys will be unable to Open, and you will have to reinstall it.

[jbd528]

Thanks SS!

[shawnsheridan]

Originally Posted by jbd528

How about an email? jbd at datasyst dot com.

Thanks!

Your PM function kicked in, so PM sent.

[CatFlap]

Originally Posted by shawnsheridan

The PSdZData version used must be >= to the last version of ISTA/P used to program the car. If you use the latest PSdZData version, then you don't have to worry about it. Otherwise, you will need to read I-Step current from VCM, cross-reference it to the ISTA/P version, and determine if your PSdZData version is >= to it.

You wrote you have PSdZ Version 4.8.0; however, this is incorrect. The PSdZ Version displayed when you click on E-Sys => Help => About is simply the PSdZ library used in that version of E-Sys, not the PSdZData data files from ISTA/P (e.g. 53.0 PSdZData).

For F15 Coding:

• F15 uses F25 as Target Connection
• Use Read ECU instead of Read SVT.
• F15 has the new BDC (Body Domain Controller) "Super ECU", which is like FEM BODY on steroids. If you can't find a particular FDL Code, look in BDC.
• Make sure under E-Sys => Options => Settings => Program tab => Memory Requirement => RAM is set to 1024 or you will likely be unable to read BDC. Do NOT use anything larger than 1024, or E-Sys will be unable to Open, and you will have to reinstall it.

Thanks Shawn, I get numerous errors when attempting to download the coding data from each ECU for example "File for "cafd_000007c8-007_000_006" not found" is this indicative of my PSdZ data being out of date? Could you advise how / where to get the latest data files from? (I received my original in a package from April1)

[shawnsheridan]

Originally Posted by CatFlap

Thanks Shawn, I get numerous errors when attempting to download the coding data from each ECU for example "File for "cafd_000007c8-007_000_006" not found" is this indicative of my PSdZ data being out of date? Could you advise how / where to get the latest data files from? (I received my original in a package from April1)

Yes, you most likely need new 53.0 PSdZData.

PM sent.

[jbd528]

Originally Posted by shawnsheridan

Your PM function kicked in, so PM sent.

Got it. Thanks SS!

[mind]

Anyone know what the 2015 X3 equivalent is for FEM_BODY ?

I want to enable the Anti-Dazzle headlight functionality by removing the USA only disabling options 5AP and 8S4 from the FA (but NOT updating the FA!!!) and then VO code FLA3 and whatever FEM_BODY is called in the new X3.

[shawnsheridan]

Originally Posted by mind

Anyone know what the 2015 X3 equivalent is for FEM_BODY ?

I want to enable the Anti-Dazzle headlight functionality by removing the USA only disabling options 5AP and 8S4 from the FA (but NOT updating the FA!!!) and then VO code FLA3 and whatever FEM_BODY is called in the new X3.

It will be your FRM module.

[princelytiger]

I just got my 2014 X3 with standard bluetooth. I want to get bluetooth audio streaming from my iPhone. I believe my car has a Combox which I located in the side panel of the cargo area. Is this easy to code? Does anyone have step-by-step instructions for this specific process?

[shawnsheridan]

Originally Posted by princelytiger

I just got my 2014 X3 with standard bluetooth. I want to get bluetooth audio streaming from my iPhone. I believe my car has a Combox which I located in the side panel of the cargo area. Is this easy to code? Does anyone have step-by-step instructions for this specific process?

See my Post here:

http://f30.bimmerpost.com/forums/sho...65&postcount=9

[seiji2000]

Hi from Tokyo. MyD updated my F25 2015.
How can I get PSDZDATA 53.0 ?