[abcpop]

Originally Posted by shawnsheridan

FYI. For those asking, The 2014 Europe PREMIUM map for CIC has now joined the North America version as being available.

We are still waiting on 2014 Europe and North America NEXT maps for NBT.

The version on my F06 is EUROPE NEXT 2013-2. Is it the latest ? or it is replaced by EUROPE PREMIUM 2014-1 ?

[shawnsheridan]

Originally Posted by abcpop

The version on my F06 is EUROPE NEXT 2013-2. Is it the latest ? or it is replaced by EUROPE PREMIUM 2014-1 ?

NEXT Maps are for NBT Head Unit and PREMIUM Maps are for CIC.

2014 NEXT should be available very soon, Next week I hope.

[abcpop]

Originally Posted by shawnsheridan

NEXT Maps are for NBT Head Unit and PREMIUM Maps are for CIC.

2014 NEXT sould be available very soon, Next week I hope.

Thank you, I'll be waiting for the good news

[RhoXS]

Can the rear window defogger be recoded to a longer time delay before shutting off?

Right now it auto shuts off after exactly ten minutes. I would much rather it stayed on until I made the decision to turn it off or, at worst, stay on for a much longer time period.

On hot humid days the window fogs up immediately after it auto turns off. On very cold sub zero days with snow or sleet, the rear defogger needs to stay on continuously to help keep ice from sticking to the rear window.

[ioschi2003]

I coded Manually the ECO PRO Function on my X3 F25 3.0D
as follow but is not possibile to flag some options ( see the pictures )

HU_CIC > 3000 HMI > ECOMODE >Aktive
HU_CIC > 3000 HMI >HVAC_MSD_EFFICIENCY >Aktive
HU_CIC > 3000 HMI >EFF_DYN_SYS_CID >Aktive
HU_CIC > 3000 HMI > ECO_FDS_POPUP>Aktive
HU_CIC > 3000 HMI > ECO_MODE_CONF>Aktive
HU_CIC > 3000 HMI > ECO_ROUTE>Aktive
HU_CIC > 3000 HMI > ECO_TIPPS>Aktive
KOMBI > 3003 FZG >VERBR_HISTORIE_ENABLE>Aktive
KOMBI > 3004 ERM > CTR_HSTY_DISP_KI_APPL >Aktive
IHKA > 3000 > ECO_PRO_MODE >aktiv
ICM ECU: 3000 -> IcmKod_B_ECONOMIC > verbaut


Probably the problem is here:

3003 ECO_FDS, 3C
FDS_MENU_TEXT"n" & FDS_MENU_SIGNAL"n"
my Actually menu is NORMAL, SPORT , SPORT+

Anybody in the forum has X3 F25 with ECO PRO function from the factory and can check the right parameter ?
thanks in advance

[DonC]

I need to swallow a bit and just start the process on mine.

[richardchou]

Hi all,

I coded my car and I am trying to code it again because BMW did a software reload on it. The car is asking for this specific file at 2 places, and I don't have it.

file name: "CAFD_0000000F_005_024_228"

1. C:\EsysData\psdzdata\swe\cafd
2. C:\EsysData\SWE\cafd

and in my esys folder the closest I have is CAFD_0000000F_005_024_332

Would you please send the CAFD file to me if you have it?
It's much appreciated! richardchou2000@hotmail.com

Thanks,
Richard

[shawnsheridan]

Originally Posted by richardchou

Hi all,

I coded my car and I am trying to code it again because BMW did a software reload on it. The car is asking for this specific file at 2 places, and I don't have it.

file name: "CAFD_0000000F_005_024_228"

1. C:\EsysData\psdzdata\swe\cafd
2. C:\EsysData\SWE\cafd

and in my esys folder the closest I have is CAFD_0000000F_005_024_332

Would you please send the CAFD file to me if you have it?
It's much appreciated! richardchou2000@hotmail.com

Thanks,
Richard

It should look for nothing in C:\EsysData\SWE\cafd. In fact, C:\EsysData\SWE can and should be completely empty.

What versions of E-Sys and PSdZData are you using?

What is your I-Step (current)?

http://www.f30post.com/forums/showpo...postcount=1403

[richardchou]

Esys: 3.18.4

PSdZData: 46.3

I-Step: F025-13-03-503

[shawnsheridan]

Originally Posted by richardchou

Esys: 3.18.4

PSdZData: 46.3

I-Step: F025-13-03-503

So, you problem is this. You car is at F025-13-03-503, which is ISTA/P 2.49.x. The PSdZData you use must be >= to the last version of ISTA/P used to program the car, and yours, which you wrote is 46.3 and is most likely actually 48.3, is too old. This means you must update your PSdZData, which in turn means you must also update to new E-Sys with patch / token as 48.3 PSdZdata is as high as you can go with E-Sys 3.18.4 for F25 chassis.

PM sent.

[abcpop]

I found this way to code http://dvdinmotion.com/how-it-works

Crazy prices but interesting.

Does someone knows more about this software?
Could we adjust some files to code other functions ?

[shawnsheridan]

Originally Posted by abcpop

I found this way to code http://dvdinmotion.com/how-it-works
...

Crazy prices but interesting.

Does someone knows more about this software?
Could we adjust some files to code other functions ?

Back in May 2011, before E-Sys and FDL Coding of Video In-Motion was available and known, this DVD from dvdinmotion.com was well examined.

Start with Post # 24 here (remove all *):

h*t*t*p://www.b*m*w*c*o*d*i*n*g*.*c*o*m*/showthread.php?373

Much was learned about it, but in the end nothing came of it as it was never determined how to expand on it to code other things.

It is VIN specific too, and when it was used in the head unit of a car with a different VIN, the CIC bricked upon booting, presumably a protection scheme.

[woodchuck1]

I have kind of a non-standard coding question. Since BMW uses electric oil pumps now, could coding be used to run the oil pump briefly before starting to pre-lubricate the engine?

[shawnsheridan]

Originally Posted by woodchuck1

I have kind of a non-standard coding question. Since BMW uses electric oil pumps now, could coding be used to run the oil pump briefly before starting to pre-lubricate the engine?

It is highly unlikely, unless that ECU configuration / option already exists for some other market of chassis with same ECU.

[abcpop]

Originally Posted by shawnsheridan

Back in May 2011

h*t*t*p://www.b*m*w*c*o*d*i*n*g*.*c*o*m*/showthread.php?373

Much was learned about it, but in the end nothing came of it as it was never determined how to expand on it to code other things.

It is VIN specific too, and when it was used in the head unit of a car with a different VIN, the CIC bricked upon booting, presumably a protection scheme.

Thanks Shawn all clear and back to E-Sys for now
At least I learned that keepping pressed the radio on/off button make the I-Drive to reboot

[abcpop]

Hello,

Did someone installed a BMW bike support or hook on a F06.

I did on mine but there is a permanent message in the Kombi telling: "Attachment trailer. Use breakes with caution" (my translaction)

BMW is waiting an answer from Munich headquarter without success.

Any idea how ro remove or reduce the showing time of this message ?

[shawnsheridan]

Originally Posted by abcpop

Thanks Shawn all clear and back to E-Sys for now
At least I learned that keepping pressed the radio on/off button make the I-Drive to reboot

[xodium]

I will be retrofitting my headlights with projectors (xenon and led halos). I tested the hid by replacing the H7 halogens and to my surprise, they won't light up. I searched the internet and saw this thread. Do I really need to code to get the HID to work? Is the FRM 3060 Al the only thing I need to code? Thanks in advance...

[xodium]

So i coded FRM 3600 AL from Halogen 13.1V to Xenon 100% and the HID worked. It's just that there's a delay when switching to the low beam hid, like a couple of seconds. Are there any other setting i need to change to make the switching instantaneous?

[gclone]

Hi Guys, I have a 2013 X3, successfully coded a bunch of things, but went to dealer and got reset. Since coding first time have diff laptop, so reinstalled S/W but can't connect since "Connect via VIN" is grayed out.
Any thoughts? Thanks!

[shawnsheridan]

Originally Posted by gclone

Hi Guys, I have a 2013 X3, successfully coded a bunch of things, but went to dealer and got reset. Since coding first time have diff laptop, so reinstalled S/W but can't connect since "Connect via VIN" is grayed out.
Any thoughts? Thanks!

Just as the Dealer updated the software on your car, you must now update the software on your PC.

PM sent.

[johoja]

Hi,

Could someone PM me a link to download the latest ESYS? and pzdata, and where to get a token. I just bought a X3 2014, F25, that I wanted to code. ..

Thanks