[stactum]

Trying to code my X3 after recent update by the shop. Every time I hit Read Coding Data I am constantly getting:

"Transaktions-Report: Aktion: Codierdaten lesen


ACSM [1] [L874276]
readCPS o.k.
cafd_00000909-004_002_026 Fehler:
File for "cafd_00000909-004_002_026" not found! [C012]"

E-sys 3.18.4 with psdzdata 49.4

Anyone can help why can't I Read Coding Data

[shawnsheridan]

Originally Posted by stactum

Trying to code my X3 after recent update by the shop. Every time I hit Read Coding Data I am constantly getting:

"Transaktions-Report: Aktion: Codierdaten lesen


ACSM [1] [L874276]
readCPS o.k.
cafd_00000909-004_002_026 Fehler:
File for "cafd_00000909-004_002_026" not found! [C012]"

E-sys 3.18.4 with psdzdata 49.4

Anyone can help why can't I Read Coding Data

You need the latest PSdZData.

PM sent.

[carcrazy101]

Originally Posted by shawnsheridan

PM sent.

Shawn- I too am looking for the most updated software and coding instructions. Could you email the link to me? Today I ordered my loaded Space Grey with Mocha interior and am looking forward to changing the parameters.

Thanks for your great insight and help.

[shawnsheridan]

Originally Posted by carcrazy101

Shawn- I too am looking for the most updated software and coding instructions. Could you email the link to me? Today I ordered my loaded Space Grey with Mocha interior and am looking forward to changing the parameters.

Thanks for your great insight and help.

PM sent.

[huskerfan16]

Originally Posted by shawnsheridan

You need the latest PSdZData.

PM sent.

I knew I came to the right spot. I need to recode several items after my 2013 X3 was serviced this past week. Can I get the updated file link, too? Will it work with the Coding Made Easy package I bought earlier this year?

Thanks!

[EspritS3]

Newbie here! I have my SW loaded, waiting for bits to make my cable. I had my F10 coded by dealer after they changed the stop/start button. Now my video is only functioning on parking brake on. First job is to recode this.
Also I have an intermittently operating angel eye. Pretty sure its the module on rear of headlight. I've sourced a replacement AHL module from a breaker. Does anyone know how to code the replacement module?

[shawnsheridan]

Originally Posted by EspritS3

Newbie here! I have my SW loaded, waiting for bits to make my cable. I had my F10 coded by dealer after they changed the stop/start button. Now my video is only functioning on parking brake on. First job is to recode this.
Also I have an intermittently operating angel eye. Pretty sure its the module on rear of headlight. I've sourced a replacement AHL module from a breaker. Does anyone know how to code the replacement module?

I don't think you need to code anything for replacement of AHL module. AHL is controlled by FRM ECU in F10, and you are not replacing it.

There may be some light calibration routine needed though, which would require ISTA/P or maybe INPA.

[EspritS3]

Originally Posted by shawnsheridan

I don't think you need to code anything for replacement of AHL module. AHL is controlled by FRM ECU in F10, and you are not replacing it.

There may be some light calibration routine needed though, which would require ISTA/P or maybe INPA.

Thanks Shawn. I'll put in the replacement and see what happens!

[ethok]

I am new to this forum. My issue is my front passenger side low beam was out (2007, 328i). It had the stock headlamp housing from Valeo. The headlamp was fine except that the wires were kind of exposed. I replaced the headlamp assembly with an aftermarket product. Still the front passenger side low beam will not turn on. So I think the issue is with my FRM. Is it possible that FRM had anticipated the short circuit in the stock headlamp assembly and cut off the power? SO it is still thinking I have the stock one?

Or it is possible that I need to replace my FRM.

Sorry for my ignorance, but some questions come to my mind.

1) where is the FRM located?
2) How i check whether it is damaged or it just need to be recoded.
3) How do i do the recoding?
4) If i have to buy a new FRM, which model/part number should i get?

Please help me

[dereky]

I am looking for the most updated software and coding instructions too. Could you please pm me the link?

Thanks for your help.

[shawnsheridan]

Originally Posted by dereky

I am looking for the most updated software and coding instructions too. Could you please pm me the link?

Thanks for your help.

PM sent.

[smytw]

Newbie to coding.
Seems everyone is having lots of fun with this "coding my X3"... so I figured I would like to have some of that fun also... if y'all dont mind.
I know the answer is in one of the 746 post of this thread already.. but could someone be kind to tell in a few words (again, sorry) the items I will need (beside a laptop and the ethernet BMW cable).. Promise I will read the instruction before I post another question.

[shawnsheridan]

Originally Posted by smytw

Newbie to coding.
Seems everyone is having lots of fun with this "coding my X3"... so I figured I would like to have some of that fun also... if y'all dont mind.
I know the answer is in one of the 746 post of this thread already.. but could someone be kind to tell in a few words (again, sorry) the items I will need (beside a laptop and the ethernet BMW cable).. Promise I will read the instruction before I post another question.

PM sent.

[smytw]

Thank You Sir.

[lwjmba]

Thanks, just registered, attracted to be here becasue of a code question, will post after 24 hours.

[capnmorganxx]

Link to latest e-sys data for a '12 X3? Is the "M" splash screen available on the X3?

[shawnsheridan]

Originally Posted by capnmorganxx

Link to latest e-sys data for a '12 X3? Is the "M" splash screen available on the X3?

PM sent.

"M" splash screen is available on any Fxx chassis with NBT Head Unit (which a 2012 F25 does not have unless it was retrofitted.).

[shawnsheridan]

The 2014 North American Premium Road Map for CIC came out early this year:

See my post here in the General Forum for details:

http://x3.xbimmers.com/forums/showth...4#post14756024

[capnmorganxx]

I'm a little confused..The first page of this post and all the documentation reference 3.18 Esys software used in combo with 48.3 psd data. I have read about 3.24 esys software, but you need to purchase a token. Is 3.24 software required for use with the 50.3 data?

[shawnsheridan]

Originally Posted by capnmorganxx

I'm a little confused..The first page of this post and all the documentation reference 3.18 Esys software used in combo with 48.3 psd data. I have read about 3.24 esys software, but you need to purchase a token. Is 3.24 software required for use with the 50.3 data?

Yes. You can only use the "free" version of E-Sys 3.18.4 up though 48.3 PSdZData. Abover that, you need to update to >= E-Sys 3.22.5, and that requires a separate patch / token be obtained.

[rdnn2jc]

Hey guys... newbie here

Is April1 still selling those kits to get started with coding? If so, I just purchased a 2013 X3 28i and am looking to do some coding!

Thanks

[CollegePark]

But not sure how easy it is!