[Izzor]

Hi, Will someone be kind enough to email me where I can get the files needed for F25 2013

izzor at yandex dot ru

Thanks!

[shawnsheridan]

Originally Posted by Izzor

Hi, Will someone be kind enough to email me where I can get the files needed for F25 2013

izzor at yandex dot ru

Thanks!

Email sent.

[UncleJohn]

Well I just received my ODB2/Enet cable from codecard (took about 3 wks to mail to Canada from Lithuania)... downloaded the latest files (i think) PSdZ 49.4 and Esys 3.22.5..

Almost ready to go; I emailed akiss but no reply yet - does anybody know how long it takes to get the token? Is there anybody else I can get this from?

[shawnsheridan]

Originally Posted by UncleJohn

Well I just received my ODB2/Enet cable from codecard (took about 3 wks to mail to Canada from Lithuania)... downloaded the latest files (i think) PSdZ 49.4 and Esys 3.22.5..

Almost ready to go; I emailed akiss but no reply yet - does anybody know how long it takes to get the token? Is there anybody else I can get this from?

It should be within 24 hours. Email him again, at both email addresses.

PM sent.

[wat2win]

I think I have found esys3.22.5 but im having trouble finding Psdz....
Please send me links for the latest program links for both?
Also is it possible to get token? I believe the esys 3.22.5 need paid one???

[wat2win]

and im planning to code F10 2013 april

[shawnsheridan]

Originally Posted by wat2win

I think I have found esys3.22.5 but im having trouble finding Psdz....
Please send me links for the latest program links for both?
Also is it possible to get token? I believe the esys 3.22.5 need paid one???

Originally Posted by wat2win

and im planning to code F10 2013 april

You can't receive PM's.

[wat2win]

Originally Posted by shawnsheridan

You can't receive PM's.

LOL oh i just registered..... I guess I need to wait 24hours

or you can send me an e-mail... wat2win@gmail.com

[shawnsheridan]

Originally Posted by wat2win

LOL oh i just registered..... I guess I need to wait 24hours

or you can send me an e-mail... wat2win@gmail.com

Email sent.

[UncleJohn]

Things looking great so far; had the software set up the other day and started coding this morning.

Started with windows/moonroof/mirrors close w Fob and had an issue with KOMFORTSCHLIESSUNG_FB. The cheat sheet says Aktiv/Werte=01 but on toggling to Aktiv, the werte value would default to 00 and it wouldnt save after i would manually change it to 01. It would not work after coding to the car; so I found that it saved if i left the werte value at 00, and it worked after saving.

I tried the tailgate close with fob next and everything saved great. It didn't work right away but after 15 minutes i tried it again and it closed with the remote.

I was getting pretty familiar with the software by this point so i did the tpms and idrive/camera disclaimers all in one shot. Speed in BC causes everything to cycle and i had to reset the time and date but everything else appeared to be stored still.

Overall experience has been great; the software is simple to install (thanks to the simple directions included with the files. and the coding is dead easy once you've coded 1-2 modules using the included instructions. Haven't had any issues with stuck ODBII plugs and the old dual core laptop running xp handles everything just fine.

shawn, april1, akiss all super friendly and supportive and showing great patience with us noobs

Looking to do A.S.S. memory next. Its not on the cheat sheet but im assuming it works the same as what's in the F10 Cheatsheet.

Is there a definitive list of whats compatible with the F25 from the F10 cheat sheet?

[UncleJohn]

Update: TPMS temp/psi doesn't work - it coded perfectly fine, but then I realized the wheels don't have the sensors installed (evidenced by rubber stems); even though the car has S2VBA. It's not a legal requirement to have sensors in Canada so I guess they can skimp on it. Anyway, will undo the coding for the TPMS tonight and go back to the regular FTM system (boo).

[shawnsheridan]

Originally Posted by UncleJohn

Update: TPMS temp/psi doesn't work - it coded perfectly fine, but then I realized the wheels don't have the sensors installed (evidenced by rubber stems); even though the car has S2VBA. It's not a legal requirement to have sensors in Canada so I guess they can skimp on it. Anyway, will undo the coding for the TPMS tonight and go back to the regular FTM system (boo).

It is strange your car has 2VB, as that should be RDC (TPMS) and not RPA (FTMS), and I was under the impression 2VB was not avaulble in Canada. Maybe it is as an option though.

Did you reset TPMS and drive the vehicle a few miles after coding it?

[xodium]

Shawn, Could you please PM me the latest Esys 3.24.2? Thanks.

[shawnsheridan]

Originally Posted by xodium

Shawn, Could you please PM me the latest Esys 3.24.2? Thanks.

What version are you using now?

[UncleJohn]

Originally Posted by shawnsheridan

It is strange your car has 2VB, as that should be RDC (TPMS) and not RPA (FTMS), and I was under the impression 2VB was not avaulble in Canada. Maybe it is as an option though.

Did you reset TPMS and drive the vehicle a few miles after coding it?

I did a VIN check last week and it showed the car had 2VB which is why I went ahead and coded it.. and then out of the blue I tried the VIN check again this morning and weirdly enough it wasn't there. So I guess no pressure sensors after all. Bah well.

[colson79]

I'm finally ready to code my X3. Anyone have a link to a place where I can purchase the enet cable?

Thanks

[UncleJohn]

Originally Posted by colson79

I'm finally ready to code my X3. Anyone have a link to a place where I can purchase the enet cable?

Thanks

I got mine from these guys: http://codecard.lt/

[BBender]

What about BC_QMVH_ENABLE in KOMBI? It should display moment distribution between axles. Is it working on F25?

[colson79]

I have my enet cable on the way, now how to I get the coding software? I looked through the beginning of this thread and I don't see any links to download it.

Thanks,

[shawnsheridan]

Originally Posted by colson79

I have my enet cable on the way, now how to I get the coding software? I looked through the beginning of this thread and I don't see any links to download it.

Thanks,

PM sent.

[MrFargo13]

Shawn,
Can you send that link to me as well, please?
Thanks!

[xodium]

Originally Posted by shawnsheridan

What version are you using now?

I'm still using 3.18 on my F25 but my friend just got a new 2013 F30 and he wants me to code it. I'm anticipating the 3.18 wont work anymore. I already have 3.22.5 but would like to get the latest esys before purchasing the token.