[Juduka]

Hi,

I'm new to programming ad coding bmw;s so would you mind sharing the link? i have an f31 wich needs an new steering rack coded. i have Esys 3.28.1
But i have a problem with the calculation of KIS/SVT Target.

[shawnsheridan]

Originally Posted by Juduka

Hi,

I'm new to programming ad coding bmw;s so would you mind sharing the link? i have an f31 wich needs an new steering rack coded. i have Esys 3.28.1
But i have a problem with the calculation of KIS/SVT Target.

PM sent.

[GabrieI]

Hello, i read the forum since last year when i bought my first BMW and i did a lot of mods, thanks to all infos i found here.
Now i'm looking to add SLI and after i added 8TH in VO, i have the 3 lines on the dash and on HUD, so i have to inject the FSC code. Is anyone here who know a good source where i can buy an original FSC code please?
Thank you in advance

[shawnsheridan]

Originally Posted by GabrieI

Hello, i read the forum since last year when i bought my first BMW and i did a lot of mods, thanks to all infos i found here.
Now i'm looking to add SLI and after i added 8TH in VO, i have the 3 lines on the dash and on HUD, so i have to inject the FSC code. Is anyone here who know a good source where i can buy an original FSC code please?
Thank you in advance

PM sent.

[GabrieI]

Originally Posted by shawnsheridan

PM sent.

Thank you so so much

[moiz]

Please Could I get the links shawn? thanks

[moiz]

hi

[shawnsheridan]

Originally Posted by moiz

Please Could I get the links shawn? thanks

PM sent.

[PourBoi-Jay]

Can someone PM the links for downloading software? Got an X3 to check out this afternoon.

TIA

[shawnsheridan]

Originally Posted by PourBoi-Jay

Can someone PM the links for downloading software? Got an X3 to check out this afternoon.

TIA

PM sent.

[Kamsung]

Originally Posted by shawnsheridan

With NBT, and >=50.4 firmware, you should be able to Browse via BT.

In HU_NBT, set these to akitv:

ENT_BTAS_BROWSING
ENT_BTAS_IAP_COVERART
ENT_BTAS_METADATA

Morning.
I came across this post so went asked a reputable well known coder in West Yorkshire area to update the hu via esys to the latest version he could. Which he said was 2022.
I tried this and still not getting track listing even though it was already enabled. So disabled them options. Coded. Re-enabled again. Bluetooth music stream doesn't even show now lol. Any ideas?

[shawnsheridan]

Originally Posted by Kamsung

Morning.
I came across this post so went asked a reputable well known coder in West Yorkshire area to update the hu via esys to the latest version he could. Which he said was 2022.
I tried this and still not getting track listing even though it was already enabled. So disabled them options. Coded. Re-enabled again. Bluetooth music stream doesn't even show now lol. Any ideas?

VO Code NBT to reset it.

[Turhapuro]

Are there any free alternatives available for coding nowadays or is purchase of bimmerutility still needed in order to be able to use esys?

[shawnsheridan]

Originally Posted by Turhapuro

Are there any free alternatives available for coding nowadays or is purchase of bimmerutility still needed in order to be able to use esys?

Only old outdated LauncherPRO 2.x, which technically wasn't free, it was cracked.

[Turhapuro]

Originally Posted by shawnsheridan

Only old outdated LauncherPRO 2.x, which technically wasn't free, it was cracked.

Thanks Shawn. Maybe I'll really need to consider buying the bimmerutility as I just got my 2nd F-series car...

[shawnsheridan]

Originally Posted by Turhapuro

Thanks Shawn. Maybe I'll really need to consider buying the bimmerutility as I just got my 2nd F-series car...

[BBender]

Hi all. After making the following coding (to enable LIM feature) on F25 2012:

ICM -> 3000 -> C_SLD_Funktion -> aktiv
ICM -> 3000 -> C_Umschaltung_ACC_DCC -> zugelassen
KOMBI -> 3003 FZG_Ausstattung, 10 -> SLD_ENABLE -> aktiv

I dont have LIM speed settings displayed on HUD like it does for cruise control, do I need any additional coding to enable that?

P.S. In more recent models LIM is linked with the SLI (setting limit to a speed of a recognized road sign) is something similar possible to activate in F25 (with S8THA (Speed Limit Info)?

[JD007]

What battery charger u guys recommend for coding?, it’s an 2017 x3, I buy the BMW ctek OE, but reading instructions it reads that use only while car is off, so I haven’t use it while coding, I code only 1 thing at the time so battery doesn’t go off on me, suggestions???

[shawnsheridan]

Originally Posted by JD007

What battery charger u guys recommend for coding?, it’s an 2017 x3, I buy the BMW ctek OE, but reading instructions it reads that use only while car is off, so I haven’t use it while coding, I code only 1 thing at the time so battery doesn’t go off on me, suggestions???

For Coding, just Run motor, so long as not coding DME / DDE.

[JD007]

Originally Posted by shawnsheridan

For Coding, just Run motor, so long as not coding DME / DDE.

What’s DME?, DDE?

[shawnsheridan]

Originally Posted by JD007

What’s DME?, DDE?

The Motor Control Unit, Petrol or Diesel.

[BBender]

Is there any option to calibrate "north" on CIC navigation (with esys or ista)? I have problem with GPS reception in my location, but I can enter location address manually though service menu, but car moves to wrong direction. From where CIC gets the initial direction coordinates when there is no GPS?