Coding made Easy: A step by step procedure

shawnsheridan · 05-11-2021, 07:36 PM

Quote:

Originally Posted by okayzac

F025-13-3-502

Too old. Requires ISTA/P 2.50.4.x I-Level so you need at F025-13-07-506 or higher.

okayr · 05-12-2021, 12:45 AM

Quote:

Originally Posted by shawnsheridan

Too old. Requires ISTA/P 2.50.4.x I-Level so you need at F025-13-07-506 or higher.

Ahh, makes sense. If I had the right PSU I would maybe attempt that. But I probably won't have this car long enough to make that expense worth it. Thanks again for all your help.

shawnsheridan · 05-12-2021, 05:44 AM

Quote:

Originally Posted by okayzac

Ahh, makes sense. If I had the right PSU I would maybe attempt that. But I probably won't have this car long enough to make that expense worth it. Thanks again for all your help.

Can always jump car to other car with its motor running.

Shamatpl · 05-12-2021, 08:06 AM

Hi Shawn and apologies………via your posts and direct assistance I have managed to learn and carry out several coding tasks, for which I am sincerely grateful. At some point in the future I will need to change my BMW F30 Battery 90ah, but only 95ah ones are available, so I am just trying to get ahead and learn how to change that “value” (as per your posts Registration would be done via ISTA or Bimmerlink)

Please can you advise “which ECU” I would find: CAS module > 3702 > VCM_BATTERY_CLASS….. and or

I have tried but failed in my efforts to follow: Step 1: Edit FA and Change HO-Wort to match replacement Battery Type and write modified FA to car VCM Step 2: VO Code CAS/FEM/BDC with modified FA

Please would you mind providing me some further guidance? there is no rush, thank you Sir….

shawnsheridan · 05-12-2021, 08:21 AM

Quote:

Originally Posted by Shamatpl

Hi Shawn and apologies………via your posts and direct assistance I have managed to learn and carry out several coding tasks, for which I am sincerely grateful. At some point in the future I will need to change my BMW F30 Battery 90ah, but only 95ah ones are available, so I am just trying to get ahead and learn how to change that “value” (as per your posts Registration would be done via ISTA or Bimmerlink)

Please can you advise “which ECU” I would find: CAS module > 3702 > VCM_BATTERY_CLASS….. and or

I have tried but failed in my efforts to follow: Step 1: Edit FA and Change HO-Wort to match replacement Battery Type and write modified FA to car VCM Step 2: VO Code CAS/FEM/BDC with modified FA

Please would you mind providing me some further guidance? there is no rush, thank you Sir….

CAS in F3x is part of FEM_BODY.

HO-Wort must be valid like A090 for 90AH AGM Battery or A105 for 105 AH AGM Battery. If you try an use something like A095, it's invalid as 95AH AGM is not a valid option.

navyvet61 · 05-12-2021, 09:30 AM

Hello Shawn can I have the links for my 2014 328i

Shamatpl · 05-12-2021, 10:39 AM

Hi Shawn: thanks for your prompt assistance.

Update: E-Sys via Launcher, ECU FEM_BODY > in cafd file there is no 3072 Folder and I also searched variations of: VCM_BATTERY_CLASS… but no success.

E-SYS Offline edit to a backup FA File: HO-Wort: Yesterday I did try to follow instructions as per VO Coding Tutorial PDF (for SALPA-Element) but only edited “E-Wort” to A095 (no option to edit the HO-Wort folder below) but as you have stated and transpired, this was rejected in the calculate FP stage. (Issue is I can only find 019 in 95ah, 020 105ah is longer and wont fit BUT as stated not replacing now, just trying to get ahead)

I’m thinking next week make a new post someone with an F30 must have encountered the same, or infact just replaced and registered without issue?

Shawn you’re a Star thanks again for helping me out.. take care Sir…

shawnsheridan · 05-12-2021, 11:37 AM

Quote:

Originally Posted by navyvet61

Hello Shawn can I have the links for my 2014 328i

Your PM function is disabled. PM me when working.

shawnsheridan · 05-12-2021, 11:40 AM

Quote:

Originally Posted by Shamatpl

Hi Shawn: thanks for your prompt assistance.

Update: E-Sys via Launcher, ECU FEM_BODY > in cafd file there is no 3072 Folder and I also searched variations of: VCM_BATTERY_CLASS… but no success.

E-SYS Offline edit to a backup FA File: HO-Wort: Yesterday I did try to follow instructions as per VO Coding Tutorial PDF (for SALPA-Element) but only edited “E-Wort” to A095 (no option to edit the HO-Wort folder below) but as you have stated and transpired, this was rejected in the calculate FP stage. (Issue is I can only find 019 in 95ah, 020 105ah is longer and wont fit BUT as stated not replacing now, just trying to get ahead)

I’m thinking next week make a new post someone with an F30 must have encountered the same, or infact just replaced and registered without issue?

Shawn you’re a Star thanks again for helping me out.. take care Sir…

You need to search entire FEM CAFD for Battery Class FDL Code, not for the 3072 Folder.

There is no A095 E-Wort. Its invalid. 95AH is not a supported battery rating. Its 90AH or 105AH.

okayr · 05-12-2021, 11:57 AM

Quote:

Originally Posted by shawnsheridan

Can always jump car to other car with its motor running.

I did not consider that! Would you have the guide/data you could pm me? I have found the guide but the links were broken.

shawnsheridan · 05-12-2021, 12:07 PM

Quote:

Originally Posted by okayzac

I did not consider that! Would you have the guide/data you could pm me? I have found the guide but the links were broken.

E-Sys - Flashing Guide v.1.0.1.pdf:
https://mega.nz/#!p9JQhAwZ!JJ9ptw8Ti...JcnSUvG81nYMsw

kondziorek · 05-13-2021, 11:15 PM

Hello Shawn,
Could you send me links to my 2012 X3 35i?

shawnsheridan · 05-13-2021, 11:22 PM

Quote:

Originally Posted by kondziorek

Hello Shawn,
Could you send me links to my 2012 X3 35i?

Your PM function is disabled. PM me when working.

yanboogie · 05-16-2021, 07:47 PM

Hey, can i get working links for latest Psdzdata & any other files that i would need to get the latest ista stuff running. 2014 F30. Thanks!

shawnsheridan · 05-16-2021, 10:10 PM

Quote:

Originally Posted by yanboogie

Hey, can i get working links for latest Psdzdata & any other files that i would need to get the latest ista stuff running. 2014 F30. Thanks!

PM sent.

maddoglee · 05-19-2021, 07:22 AM

Quote:

Originally Posted by yanboogie

Hey, can i get working links for latest Psdzdata & any other files that i would need to get the latest ista stuff running. 2014 F30. Thanks!

+1 for a 2012 F20... just got an ENET cable and trying to figure out a Passenger Restraint System error!

shawnsheridan · 05-19-2021, 09:23 AM

Quote:

Originally Posted by maddoglee

+1 for a 2012 F20... just got an ENET cable and trying to figure out a Passenger Restraint System error!

Your Receive PM function is disabled. PM me when working.

maddoglee · 05-20-2021, 08:04 PM

Thanks, I can't seem to get the PM working as I'm a new member. but i think this is my 3rd post reply.

I've actually got E-SYS working from a youtube clip that links and credits you Shawn.. Thanks for your quick response though!

Bestactor · 05-21-2021, 01:08 AM

Is there a way to use this library as a centralized psdzdata for ista and esys? Without having duplicates?

ssellei97 · 05-23-2021, 12:54 PM

Hello shawnsheridan,

I have an F11 from 2013 running latest I-Step version (F010-21-03-520). I need to do some coding only, so lite version should be enough.
I already have PSdZDATA 4.29 LITE, but older E-sys. FDL editing is not possible because I see only dots into.

Could you please help me with the right E-sys to perform this coding? Or do you have another scenario for that?

Also, I've sent you a PM

shawnsheridan · 05-23-2021, 01:28 PM

Quote:

Originally Posted by maddoglee

Thanks, I can't seem to get the PM working as I'm a new member. but i think this is my 3rd post reply.

I've actually got E-SYS working from a youtube clip that links and credits you Shawn.. Thanks for your quick response though!

It's working now. PM sent.

shawnsheridan · 05-23-2021, 01:29 PM

Quote:

Originally Posted by Bestactor

Is there a way to use this library as a centralized psdzdata for ista and esys? Without having duplicates?

Use a Symbolic Link (MLINK) between ISTA psdzdata folder and empty E-Sys psdzdata folder.

05-12-2021, 08:06 AM	#3084
Shamatpl New Member 0 Rep 8 Posts Drives: BMW F30 Join Date: Apr 2021 Location: London iTrader: (0)	Hi Shawn and apologies………via your posts and direct assistance I have managed to learn and carry out several coding tasks, for which I am sincerely grateful. At some point in the future I will need to change my BMW F30 Battery 90ah, but only 95ah ones are available, so I am just trying to get ahead and learn how to change that “value” (as per your posts Registration would be done via ISTA or Bimmerlink) Please can you advise “which ECU” I would find: CAS module > 3702 > VCM_BATTERY_CLASS….. and or I have tried but failed in my efforts to follow: Step 1: Edit FA and Change HO-Wort to match replacement Battery Type and write modified FA to car VCM Step 2: VO Code CAS/FEM/BDC with modified FA Please would you mind providing me some further guidance? there is no rush, thank you Sir….
	Appreciate 0 Quote

05-12-2021, 09:30 AM	#3086
navyvet61 Registered 0 Rep 1 Posts Drives: bmw 328i 2014 Join Date: May 2021 Location: Fresno calif iTrader: (0)	links for e sys Hello Shawn can I have the links for my 2014 328i
	Appreciate 0 Quote

05-12-2021, 10:39 AM	#3087
Shamatpl New Member 0 Rep 8 Posts Drives: BMW F30 Join Date: Apr 2021 Location: London iTrader: (0)	Hi Shawn: thanks for your prompt assistance. Update: E-Sys via Launcher, ECU FEM_BODY > in cafd file there is no 3072 Folder and I also searched variations of: VCM_BATTERY_CLASS… but no success. E-SYS Offline edit to a backup FA File: HO-Wort: Yesterday I did try to follow instructions as per VO Coding Tutorial PDF (for SALPA-Element) but only edited “E-Wort” to A095 (no option to edit the HO-Wort folder below) but as you have stated and transpired, this was rejected in the calculate FP stage. (Issue is I can only find 019 in 95ah, 020 105ah is longer and wont fit BUT as stated not replacing now, just trying to get ahead) I’m thinking next week make a new post someone with an F30 must have encountered the same, or infact just replaced and registered without issue? Shawn you’re a Star thanks again for helping me out.. take care Sir…
	Appreciate 0 Quote

05-13-2021, 11:15 PM	#3092
kondziorek New Member 0 Rep 14 Posts Drives: BMW X3 Join Date: May 2021 Location: United States iTrader: (0)	Hello Shawn, Could you send me links to my 2012 X3 35i?
	Appreciate 0 Quote

05-16-2021, 07:47 PM	#3094
yanboogie Private 7 Rep 81 Posts Drives: F30/Q50/Eclipse GSX Join Date: Dec 2016 Location: Texas iTrader: (0)	Hey, can i get working links for latest Psdzdata & any other files that i would need to get the latest ista stuff running. 2014 F30. Thanks!
	Appreciate 0 Quote

05-20-2021, 08:04 PM	#3098
maddoglee 2012 BMW M135i F20 6 Rep 11 Posts Drives: BMW M135i F20 Join Date: May 2021 Location: Sydney, Australia iTrader: (0)	Thanks, I can't seem to get the PM working as I'm a new member. but i think this is my 3rd post reply. I've actually got E-SYS working from a youtube clip that links and credits you Shawn.. Thanks for your quick response though!
	Appreciate 0 Quote

05-21-2021, 01:08 AM	#3099
Bestactor New Member 10 Rep 27 Posts Drives: X3 m sport 20d Join Date: Apr 2021 Location: England iTrader: (0)	Is there a way to use this library as a centralized psdzdata for ista and esys? Without having duplicates?
	Appreciate 0 Quote

05-23-2021, 12:54 PM	#3100
ssellei97 Registered 0 Rep 3 Posts Drives: 2013 F11 Join Date: May 2021 Location: Timisoara iTrader: (0)	Hello shawnsheridan, I have an F11 from 2013 running latest I-Step version (F010-21-03-520). I need to do some coding only, so lite version should be enough. I already have PSdZDATA 4.29 LITE, but older E-sys. FDL editing is not possible because I see only dots into. Could you please help me with the right E-sys to perform this coding? Or do you have another scenario for that? Also, I've sent you a PM Last edited by ssellei97; 05-23-2021 at 01:52 PM..
	Appreciate 0 Quote