[shawnsheridan]

Originally Posted by ctbear

Shawn, what is the difference between two versions of F020 when selecting Target to connect? Is the 540 just a newer psdzdata version of 520? Does it matter which one I connect with?

Using v.4.26.22_PSdZData_Lite

Thank you in advance

Use newer (bottom) one.

[ctbear]

Originally Posted by shawnsheridan

Use newer (bottom) one.

Thanks. I will use the bottom newer one:
F020_20_11_520

Also, is this why I noticed when checking the "dist" folders that I have 2 versions of each psdzdata chassis folder. Attached updated screenshot to my above post.

[shawnsheridan]

Originally Posted by ctbear

Thanks. I will use the bottom newer one:
F020_20_11_520

Also, is this why I noticed when checking the "dist" folders that I have 2 versions of each psdzdata chassis folder. Attached updated screenshot to my above post.

Yes.

[Mike Dowg]

Hi shawnsheridan , would you help me out with links to software for my 135i lci 2016 ?
Can't get running anything I could find. :-/

cheers
Mike

[shawnsheridan]

Originally Posted by Mike Dowg

Hi shawnsheridan , would you help me out with links to software for my 135i lci 2016 ?
Can't get running anything I could find. :-/

cheers
Mike

PM sent.

[Mike Dowg]

awesome, thank you so much! Will try it asap. Just a question: I want to disable RDKS (wheel psi control thing), hood lock sensor (bridge the wire dont work it for some reason); remove headlights and PDC - building a drifting race car. Would I need the FULL or light archive?
cheers
Mike

[shawnsheridan]

Originally Posted by Mike Dowg

awesome, thank you so much! Will try it asap. Just a question: I want to disable RDKS (wheel psi control thing), hood lock sensor (bridge the wire dont work it for some reason); remove headlights and PDC - building a drifting race car. Would I need the FULL or light archive?
cheers
Mike

Most likley just Lite.

[wmansi]

Hello shawnsheridan

I have a 2016 X1 S-Drive 18 with Software Version: HV-130.025.041

Can you please send me link to the softwares and steps to enable Carplay?
I am using ENET cable with e-Sys.


Thanks a lot for your help.

[shawnsheridan]

Originally Posted by wmansi

Hello shawnsheridan

I have a 2016 X1 S-Drive 18 with Software Version: HV-130.025.041

Can you please send me link to the softwares and steps to enable Carplay?
I am using ENET cable with e-Sys.

Thanks a lot for your help.

PM sent.

[Grips]

Originally Posted by Grips

Hi gang,

I screwed up my 2017 X3 when using Esys for the first time. I'm hoping someone can help me out or give me advice. Here is what I did...

I ran Esys and before doing anything I backed up the FA, SVT and all CAFD files. My goal was to enable DVD in motion and Android screen mirroring. Based on the Cheatsheet. I was looking for HU_CIC but could not find it. I tried to look in HU_NBT2 to locate the "speedlock" settings to no avail. I was examining "CAFD_00001ef6...014" to locate settings. At some point, I mistakenly clicked on "code default values" thinking It would bring up a file to examine but instead it started writing to the vehicle. Upon completion, my whole Idrive system was black and unresponsive. I was able to reconnect and noticed that the CAFD file was no longer present under HU_NBT2. I was able to restore that file and my Idrive system came back to life. Phew! Unfortunately, my Nav now requires a key to be activated.

Is this something I can fix based on my backup FA or SVT files? Can I ask a dealer for the code for my car since it is under warranty? If so, what can I say happened that is believable without telling them the truth? I haven't driven the car since and is there something else I may have deactivated in the process? All my previous settings (ie radio, Bluetooth connections) seem to be the same. Any help would be greatly appreciated. Losing sleep over this is not fun!

Thanks

Just a quick update... I was able to get my car up and running again with updated maps and Apple CarPlay. Just wanted to thank Shawn for recommending Gerry. I can vouch for Gerry as everything that he sent me went smoothly and his communication was top notch. I would not hesitate to recommend him based on my experiences.

[shawnsheridan]

Originally Posted by Grips

Just a quick update... I was able to get my car up and running again with updated maps and Apple CarPlay. Just wanted to thank Shawn for recommending Gerry. I can vouch for Gerry as everything that he sent me went smoothly and his communication was top notch. I would not hesitate to recommend him based on my experiences.

[snc805]

Hi guys
i'm new in this forum and seeking some help with my BMW x6 F16 coding.
Trying to achieve.
1. FSC code (lifetime)
2. Update map to Australia - latest (if there a link to download the map)
3. Code to fold mirror and windows while locked.

Just a heads up, I was watching videos to do this but can't see any option from esys app to select (TargetSelector: ) a F16 to connect!

Can someone send me the details of the all necessary software link and requirements?
However, I've got the ENET cable and a windows 10 laptop.

Thanks everyone in advance

[shawnsheridan]

Originally Posted by snc805

...Just a heads up, I was watching videos to do this but can't see any option from esys app to select (TargetSelector: ) a F16 to connect!

Can someone send me the details of the all necessary software link and requirements?
However, I've got the ENET cable and a windows 10 laptop.

Thanks everyone in advance

F16 uses F025 Connection Target. PM sent.

[jwarre2]

Hi Shawnsheridan,

I have a 2014 F30 N55. Can you please send links?

[shawnsheridan]

Originally Posted by jwarre2

Hi Shawnsheridan,

I have a 2014 F30 N55. Can you please send links?

PM sent.

[praft84]

hi shawnsheridan. i recently purchased nbt evo retrofit for my x1 e84 car with original CIC installed. somehow the retorift kit doesnt work since i bought it online. the seller says its locked due some installation issue while my mechanic tells me its the wrong coding ( not properly matched ) to my car. is it possible to recode the nbt evo adapter and the kit and how ? pls guide. Appreciate your ans

[shawnsheridan]

Originally Posted by praft84

hi shawnsheridan. i recently purchased nbt evo retrofit for my x1 e84 car with original CIC installed. somehow the retorift kit doesnt work since i bought it online. the seller says its locked due some installation issue while my mechanic tells me its the wrong coding ( not properly matched ) to my car. is it possible to recode the nbt evo adapter and the kit and how ? pls guide. Appreciate your ans

I have no idea what Exx EVO Adapter you have, but hopefully it is CarSystems / Custom Retrofit one. You should be able to code EVO with ENET Cable and E-Sys using Gateway URL and 169.254.199.99:6801.

[IA___73]

Hi Shawnsheridan!
I have been trying to figure out how to add the car to my connected drive account and to control some of the car features with my phone via the app. BMW customer service tells me my car dont have the services 6AK and 6AC.

after trying a couple of suggestions from other forums with no luck I found suggestions that You might have a working solution to fix this?

[shawnsheridan]

Originally Posted by IA___73

Hi Shawnsheridan!
I have been trying to figure out how to add the car to my connected drive account and to control some of the car features with my phone via the app. BMW customer service tells me my car dont have the services 6AK and 6AC.

after trying a couple of suggestions from other forums with no luck I found suggestions that You might have a working solution to fix this?

No. You cant just code car for Telematics. Assuming it even has the required hardware, you need an account from BMW AG, and car SIM needs provisioning by BMW AG for every subscribed Connected Drive Service.

[GMOONEY1]

Hi Shawn,

You are one popular guy on this forum! Sorry to bother you however I am about to try coding my 2017 X3 F25 , could you send me the link?

Thank you in Advance.

[shawnsheridan]

Originally Posted by GMOONEY1

Hi Shawn,

You are one popular guy on this forum! Sorry to bother you however I am about to try coding my 2017 X3 F25 , could you send me the link?

Thank you in Advance.

PM sent.

[AlexV0412]

I have just got a 2020 X4 M40i and have a couple of queries. Is it possible to change the default speed,(12mph) to something a little quicker? Also I have noticed condensation on the windscreen when I get in, first thing in the morning and I noticed it this afternoon after I’d washed it. Any ideas? Thank you.