Coding made Easy: A step by step procedure

pungo · 07-03-2019, 12:20 AM

Quote:

Originally Posted by pungo

I coded the vehicle to start without pressing the brake pedal. It works, but I have to press the starter button twice. I don't know it this the expected behavior or not?

CAS>3000>TC_STARTLOCK_BRAKE set to: nicht_aktiv
CAS>3000>C_STARTLOCK_DRIVINGREADINESS set to: nicht_aktiv

Quote:

Originally Posted by Almaretto

Yes, this is expected.

Thanks for the conformation, I guess pressing the start button twice is not too bad, I'm getting used to it. Comes in handy when working on the engine and I need to start the car, I can just reach to press the button instead of climbing in to get a foot on the brake pedal

pungo · 07-08-2019, 08:31 PM

Quote:

Originally Posted by Almaretto

Yes, this is expected.

Quote:

Originally Posted by pungo

I coded the vehicle to start without pressing the brake pedal. It works, but I have to press the starter button twice. I don't know it this the expected behavior or not?

CAS>3000>TC_STARTLOCK_BRAKE set to: nicht_aktiv
CAS>3000>C_STARTLOCK_DRIVINGREADINESS set to: nicht_aktiv

Quote:

Originally Posted by pungo

Thanks for the conformation, I guess pressing the start button twice is not too bad, I'm getting used to it. Comes in handy when working on the engine and I need to start the car, I can just reach to press the button instead of climbing in to get a foot on the brake pedal

Now that I've used this a bit, I find that there's some adverse conditions. Say I press the start button once without starting the car, say to listen to the stereo. I'm done listing and want to shut everything off. If I press the start button again, the car will start, where before with the brake=aktiv, everything would simply turn off. Have a to weigh out which way I like better. Just though I'd share the behavior if you plan to set the car to not require the brake to be pressed to start the car.

E60525d · 07-21-2019, 10:51 AM

What's the steps for coding SAT to a F25?

GeoX3 · 07-21-2019, 04:06 PM

Hi all I am new to the forum and would like to know coding can be done to my F25 late 2014 model? I did read trough the thread and would like to know if there is a updated cheat list for using with the esys? Thanx in advance

shawnsheridan · 07-21-2019, 04:56 PM

Quote:

Originally Posted by GeoX3

Hi all I am new to the forum and would like to know coding can be done to my F25 late 2014 model? I did read trough the thread and would like to know if there is a updated cheat list for using with the esys? Thanx in advance

PM sent.

zhoudaniell · 07-22-2019, 04:33 PM

could you send me the latest setup and coding possibilities? I haven't done it in about 1.5 years, and the main thing I want to do is to be able to hold lock to close my trunk. Would be interested to see if there have been any additional features for coding since my last time around!

Hank1013F25 · 07-23-2019, 10:59 AM

Picture here: https://i.redd.it/6qgerkmav1c31.jpg

Currently in a 2012 BMW X3 (F25) and I have an OBDII adapter and Bimmercode. I was considering getting a cable and e-sys to try and code SLI, LDW and FCW but before I do I want to make sure I have the necessary hardware. Do I have the KAFAS or KAFAS 2 camera? At the base of the mirror there is also a white box which I assume is for HBA. Not the white box on the side of the mirror itself used for auto dimming.

So far I've coded:

- Automatically unlock doors when engine shuts off

- Disable all warning messages on iDrive

- Activated Sports Automatic Transmission (cluster says S1, S2, etc. instead of DS now)

- Angel eyes at 100% brightness when low beams on

- Automatically turn on auto high beam assist when lights come on

- Disable driver side seat belt warning (bc if I don't have it on it's for a reason - and I am not driving on roads)

- Disabled speed limits for activating rear and side cams

shawnsheridan · 07-23-2019, 12:06 PM

Quote:

Originally Posted by Hank1013F25

Picture here: https://i.redd.it/6qgerkmav1c31.jpg

Currently in a 2012 BMW X3 (F25) and I have an OBDII adapter and Bimmercode. I was considering getting a cable and e-sys to try and code SLI, LDW and FCW but before I do I want to make sure I have the necessary hardware. Do I have the KAFAS or KAFAS 2 camera? At the base of the mirror there is also a white box which I assume is for HBA. Not the white box on the side of the mirror itself used for auto dimming.

So far I've coded:

- Automatically unlock doors when engine shuts off

- Disable all warning messages on iDrive

- Activated Sports Automatic Transmission (cluster says S1, S2, etc. instead of DS now)

- Angel eyes at 100% brightness when low beams on

- Automatically turn on auto high beam assist when lights come on

- Disable driver side seat belt warning (bc if I don't have it on it's for a reason - and I am not driving on roads)

- Disabled speed limits for activating rear and side cams

SLI and FCW besides requiring KAFAS Camera requires FSC Enabling Codes before it can be coded. LDW requires Dash Switch.

zhoudaniell · 07-23-2019, 05:25 PM

Quote:

Originally Posted by GeoX3

Hi all I am new to the forum and would like to know coding can be done to my F25 late 2014 model? I did read trough the thread and would like to know if there is a updated cheat list for using with the esys? Thanx in advance

Hey Shawn,

Could you send me the latest information to be able to code my car?

Thanks!

shawnsheridan · 07-23-2019, 05:29 PM

Quote:

Originally Posted by zhoudaniell

Hey Shawn,

Could you send me the latest information to be able to code my car?

Thanks!

PM sent.

malbec · 07-24-2019, 07:57 PM

Quote:

Originally Posted by shawnsheridan

PM sent.

can you share it to me please too
thanks!

shawnsheridan · 07-25-2019, 11:06 AM

Quote:

Originally Posted by malbec

can you share it to me please too
thanks!

PM sent.

bimmer_gigi · 07-25-2019, 03:36 PM

Quote:

Originally Posted by shawnsheridan

PM sent.

me too, please.
thanks in advance.

shawnsheridan · 07-25-2019, 03:51 PM

Quote:

Originally Posted by bimmer_gigi

me too, please.
thanks in advance.

PM sent.

gheron · 07-28-2019, 09:20 AM

Shawn, could you please send me the link for the software Esys?
I have a 2014 F25 xdrive 2.0 xd
Gianni

shawnsheridan · 07-28-2019, 09:56 AM

Quote:

Originally Posted by gheron

Shawn, could you please send me the link for the software Esys?
I have a 2014 F25 xdrive 2.0 xd
Gianni

PM sent.

x3sm · 07-28-2019, 09:44 PM

Does anyone how to code the small LCD screen on KOMBI to stay in day-time mode? I hate that it switches to orange in night mode. I tried KOMBI-->3007 KI_Dimmung, 24-->DIM_NACHT_EIN-->Werte=FF and tried to switch it to nicht_aktiv and it still stays orange. Any idea?

RySe96 · 07-30-2019, 11:00 PM

Quote:

Originally Posted by zhoudaniell

Hey Shawn,

Could you send me the latest information to be able to code my car?

Thanks!

Could I get this as well? Thanks!

Gerhard01 · 07-31-2019, 01:58 AM

Quote:

Originally Posted by pungo

I coded the vehicle to start without pressing the brake pedal. It works, but I have to press the starter button twice. I don't know it this the expected behavior or not?

CAS>3000>TC_STARTLOCK_BRAKE set to: nicht_aktiv
CAS>3000>C_STARTLOCK_DRIVINGREADINESS set to: nicht_aktiv

Yes, this is expected.

Gerhard01 · 07-31-2019, 02:03 AM

Quote:

Originally Posted by shawnsheridan

PM sent.

me too, please.

shawnsheridan · 07-31-2019, 07:21 AM

Quote:

Originally Posted by Gerhard01

me too, please.

PM sent.

Gerhard01 · 07-31-2019, 12:30 PM

Thanks

07-21-2019, 10:51 AM	#2599
E60525d Lieutenant Colonel 289 Rep 1,533 Posts Drives: 330d M Sport LCI Join Date: Mar 2010 Location: UK iTrader: (0)	What's the steps for coding SAT to a F25?
	Appreciate 0 Quote

07-21-2019, 04:06 PM	#2600
GeoX3 Registered 0 Rep 1 Posts Drives: Bmw X3 F25 Join Date: Jul 2019 Location: RSA iTrader: (0) Garage List 2014 BMW X3 [0.00]	Hi all I am new to the forum and would like to know coding can be done to my F25 late 2014 model? I did read trough the thread and would like to know if there is a updated cheat list for using with the esys? Thanx in advance Last edited by GeoX3; 07-21-2019 at 04:20 PM..
	Appreciate 0 Quote

07-22-2019, 04:33 PM	#2602
zhoudaniell Private 13 Rep 89 Posts Drives: 2014 x3 Join Date: Mar 2017 Location: Wisconsin iTrader: (0)	could you send me the latest setup and coding possibilities? I haven't done it in about 1.5 years, and the main thing I want to do is to be able to hold lock to close my trunk. Would be interested to see if there have been any additional features for coding since my last time around!
	Appreciate 0 Quote

07-23-2019, 10:59 AM	#2603
Hank1013F25 Registered 1 Rep 2 Posts Drives: 2012 BMW X3 (F25) Join Date: Jul 2019 Location: Boston, MA iTrader: (0)	Could someone be kind enough to let me know if I have the KAFAS or KAFAS2 camera? It Picture here: https://i.redd.it/6qgerkmav1c31.jpg Currently in a 2012 BMW X3 (F25) and I have an OBDII adapter and Bimmercode. I was considering getting a cable and e-sys to try and code SLI, LDW and FCW but before I do I want to make sure I have the necessary hardware. Do I have the KAFAS or KAFAS 2 camera? At the base of the mirror there is also a white box which I assume is for HBA. Not the white box on the side of the mirror itself used for auto dimming. So far I've coded: - Automatically unlock doors when engine shuts off - Disable all warning messages on iDrive - Activated Sports Automatic Transmission (cluster says S1, S2, etc. instead of DS now) - Angel eyes at 100% brightness when low beams on - Automatically turn on auto high beam assist when lights come on - Disable driver side seat belt warning (bc if I don't have it on it's for a reason - and I am not driving on roads) - Disabled speed limits for activating rear and side cams
	Appreciate 0 Quote

07-28-2019, 09:20 AM	#2611
gheron Registered 0 Rep 2 Posts Drives: x3 f25 Join Date: Jul 2015 Location: Crotone iTrader: (0)	esys Shawn, could you please send me the link for the software Esys? I have a 2014 F25 xdrive 2.0 xd Gianni
	Appreciate 0 Quote

07-28-2019, 09:44 PM	#2613
x3sm Captain 308 Rep 755 Posts Drives: M3 E93 Porsche Join Date: May 2018 Location: Ashville iTrader: (0)	Does anyone how to code the small LCD screen on KOMBI to stay in day-time mode? I hate that it switches to orange in night mode. I tried KOMBI-->3007 KI_Dimmung, 24-->DIM_NACHT_EIN-->Werte=FF and tried to switch it to nicht_aktiv and it still stays orange. Any idea? __________________ M3 E93 PORSCHE MACAN S: SOLD BMW X3 F25: SOLD AUDI S4: SOLD BMW E92 335: SOLD
	Appreciate 0 Quote

07-31-2019, 12:30 PM	#2618
Gerhard01 Registered 0 Rep 4 Posts Drives: E60 Join Date: Jul 2019 Location: Berlin iTrader: (0)	Thanks
	Appreciate 0 Quote