[Jonathane]

Hi everyone,

I recently coded off the warm and cold bulb check via

3090 FRM_WARMKALT_UEBERW_AKT, D0 -> AUSG_15_BL_L_WARM_UEBERW_AKTIV
3090 FRM_WARMKALT_UEBERW_AKT, D0 -> AUSG_15_BL_L_KALT_UEBERW_AKTIV
3090 FRM_WARMKALT_UEBERW_AKT, D0 -> AUSG_16_BL_R_WARM_UEBERW_AKTIV
3090 FRM_WARMKALT_UEBERW_AKT, D0 -> AUSG_16_BL_R_KALT_UEBERW_AKTIV

and set all four from aktiv to nicht_aktiv and followed the procedure of coding via E-Sys. However, upon installing my LED brake light bulbs and then going for a drive the left and right brake lamp malfunction came on. I did park behind a wall to confirm the LED bulbs indeed do work so I am unsure why this indication would come on. The bulbs I am using are Canbus Error Free

[pungo]

Did you set IS_LED to aktiv?

[Jonathane]

Originally Posted by pungo

Did you set IS_LED set to aktiv?

Yes I did do both, set IS_LED to aktiv and also to nicht_aktiv and the same outcome came about.