05-04-2016, 09:40 PM | #1893 |
Enlisted Member
12
Rep 34
Posts |
Yes radio code, they are different for XM then Sirius, at least in Canada they are. No worries I will get dealer to work it out. Thanks for your time.
|
Appreciate
0
|
05-08-2016, 02:55 PM | #1894 |
New Member
12
Rep 11
Posts |
F25 Halogenm to Xenon
Hi guys,
Coming with some update regarding halogen to LCI Bi-xenon retrofit. The new module came last week. I followed the instructions given by Shawn and injected the CAFD into it. Surprisingly everything worked on the first try...good. Also after VO coding 522 into FRM the failure code "Hardware and software coding unplausibel" and "TMS LIN-Bus Failure" disapeared from INPA+ I'm able to measure voltage at the TMS FRM pins....so I know now that the new FRM is ok with XENON function (Sending picture of both old/new modules). There is however other problem with TMS Modules (they are also new and not initialized). I cannot see them in ESYS and INPA is giving me two failures (left /right): 0x800FC3 Treiber-Modul Scheinwerfer (TMS) links: Kodierfehler oder timeout Do you have some idea why I cannot see the modules in ESYS, or how can i solve the problem.....Could it be that the TMS modules have to be somehow initialized first? Additional question: Can you see TMS module in ESYS as standalone module, or is it only submodul of FRM? |
Appreciate
0
|
05-10-2016, 12:48 AM | #1895 |
New Member
12
Rep 11
Posts |
TMS Update
Hi,
Small update: There is subsection TMS in FRM FDL code. I will try to disable TMS_ID (if such value exist over there) in order to see the modules in ESYS. I heard also about using RHEINGOLD to initialize or re-flash the new TMS modules from different VIN/ Transport mode. In case, somebody have some experience with that, please let me know. |
Appreciate
0
|
05-10-2016, 09:31 AM | #1897 |
General
10931
Rep 42,976
Posts
Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX
|
PM sent.
__________________
2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant 2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE |
Appreciate
0
|
05-11-2016, 09:59 AM | #1900 |
General
10931
Rep 42,976
Posts
Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX
|
PM sent.
__________________
2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant 2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE |
Appreciate
0
|
05-12-2016, 12:29 PM | #1902 |
Private
5
Rep 54
Posts |
When coding the idrive for office on NBT you remove SL8Ax correct ? but once removed do you still code VO and if so what to? Surely if it's removed then there is nothing to code ?
|
Appreciate
0
|
05-14-2016, 11:18 AM | #1903 |
New Member
12
Rep 11
Posts |
Halogen to LCI ECE Bi/Xenon F25 X3
Hi all,
Proudly announce, my halogen to xenon retrofit succeeded. (Front Headlights) In case somebody will be interested more in detail on how to do it, let me know. Shortly: 1) You need to buy original bmw headlights with xenon + TMS modules should be installed in the headlights. 2) You need to buy new FRM III Module even that the one you have in the car is also FRMIII (smart guys in bmw are saving money in case of factory halogen) 3) You need to do some wiring changes 4) VO Code 522 and write it in to the FRM Module (VO Coding with ESYS) 5) Connect the lights, you should be getting xenon + side marker (no Angel eyes) 6) In INPA you should be getting the failure code: TMS Module Coding Error or timeout...that means FRM sees the modules, but they are not initilaized. In case you are getting LIN-Bus Failure, you should check your wiring again bcause the FRM cannot see the TMS Modules. 7) Run RHEINGOLD and perform service function.....software should direct you automaticaly and offer you the TMS Module initialization...after the initialization, you should be ok...with the front headlamps..... For Shawn: Even after the TMS is initialized, it is not shown as ECU in ESYS..however there is FDL code fo TMS inside FRM ECU. Still having some minor problems with brake lights and need to install LWR (auto headlight vertical regulation)...but this Im sure will be solved fast. |
Appreciate
0
|
05-17-2016, 10:58 AM | #1904 |
Registered
0
Rep 1
Posts |
Hey guys, recently got a 2015 X3 28i XDrive, and my coding cable should arrive today. Thanks for all of the helpful tutorials so far, this will be my first time coding.
Could someone send me the software and info I need to download please? fman825 (at) yahoo (dot) com Thanks! Glad to be back in a BMW after 5 years off, this is my fourth so far. |
Appreciate
0
|
05-17-2016, 11:11 AM | #1905 |
General
10931
Rep 42,976
Posts
Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX
|
You cannot send or receive PM's yet. Send me one when you can.
__________________
2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant 2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE |
Appreciate
0
|
05-17-2016, 11:34 AM | #1907 |
General
10931
Rep 42,976
Posts
Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX
|
HU_NBT => INBAND_RINGING = aktiv, but it only works with some phones (e.g. iPhone and not Android).
__________________
2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant 2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE |
Appreciate
0
|
05-18-2016, 11:55 AM | #1909 |
Colonel
635
Rep 2,808
Posts |
Not sure if it's been answered here already, but is it possible to code the car to remember the last Sport/Comfort/ECO mode?
It was asked here: http://x3.xbimmers.com/forums/showthread.php?t=740967 |
Appreciate
0
|
05-18-2016, 01:00 PM | #1910 | |
Lieutenant
281
Rep 494
Posts |
Quote:
|
|
Appreciate
0
|
05-18-2016, 02:57 PM | #1912 |
New Member
0
Rep 18
Posts |
|
Appreciate
0
|
05-20-2016, 03:26 PM | #1914 |
New Member
0
Rep 22
Posts
Drives: 2013 X3
Join Date: Oct 2013
Location: Dallas, TX
|
I need help please....
I already have the cable and the software installed. It connects with the car. My problem is what to do (and how) then. I am following the "Getting Started" pdf that came with the software BUT it was written for version 3.18.4 and the E-sys that I have is version 3.27.1 so most of the options are different... for instance, it tells me to "Select CADF and then select Read Coding Data" but in my version it looks different than the screenshot, and the option is not there... IS there any kind of beginners guide for version 3.27.1? I am an IT guy and have done similar coding before, but it is my first time with BMW and E-Sys and I am lost... |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|