[shawnsheridan]

Originally Posted by rdxm

Hi guys,

I want to start coding a 2015 X3, Canadian version.
Where can I download the proper/latest e-sys version?

Also, does anybody know if the coding of the TPMS pressure and temp reading would work in the Canadian version of the X3?

Is there a preferred type of cable that works best or any cable I can find on eBay would work?

Thank you.

PM sent.

TPMS requires car have factory option 2VB.

ENET Cable:

http://enetcables.com/

[rdxm]

Originally Posted by shawnsheridan

PM sent.

TPMS requires car have factory option 2VB.

ENET Cable:

http://enetcables.com/

OMG that was fast!

Thanks!

[Spitfire-]

Hi Sean,

I was able to do some coding today but had trouble reading 2 modules. I get an error message when trying to read the HU_NBT and FRM modules. Esys reports back as file not found for both modules. I have the lite version of PSdZData installed.

What can I do to fix this?

Thanks!

[shawnsheridan]

Originally Posted by Spitfire-

Hi Sean,

I was able to do some coding today but had trouble reading 2 modules. I get an error message when trying to read the HU_NBT and FRM modules. Esys reports back as file not found for both modules. I have the lite version of PSdZData installed.

What can I do to fix this?

Thanks!

I assume you need:

cafd_00000794.caf.012_035_117
cafd_00000ded.caf.003_013_025

See my post here:

http://www.bimmerfest.com/forums/sho...22#post8767922

[Spitfire-]

Originally Posted by shawnsheridan

I assume you need:

cafd_00000794.caf.012_035_117
cafd_00000ded.caf.003_013_025

See my post here:

http://www.bimmerfest.com/forums/sho...22#post8767922

Sorry, should've mentioned the file names that were missing. It's reporting that the following 2 files cannot be found:

FRM:
cafd_0000106d-013_012_013

HU_NBT:
cafd_00000ded-003_013_025

The HU_NBT file you linked for me is correct. Do you know where I can get the FRM file?

Thanks!

[shawnsheridan]

Originally Posted by Spitfire-

Sorry, should've mentioned the file names that were missing. It's reporting that the following 2 files cannot be found:

FRM:
cafd_0000106d-013_012_013

HU_NBT:
cafd_00000ded-003_013_025

The HU_NBT file you linked for me is correct. Do you know where I can get the FRM file?

Thanks!

NBT is in my post above.

Here is FRM:
cafd_0000106d.caf.013_012_013:

https://mega.co.nz/#!hkJ3jQaA!WfIZB9...9VPtOwjDRk75v4

[Spitfire-]

Thanks for all your help Shawn!

I was able to code:

- opening/closing windows/mirrors/sunroof with key fob/comfort access
- closing of tailgate via keyfob
- disabled iDrive/camera legal disclaimers
- digital speedometer in BC
- enable windows to continue closing when door is opened

Just a few more questions.

Do you know how I can get fog lights to stay on with high beams and how I can get the ///M startup screen? I've looked through posts/cheat sheets but can't seem to find the option.

I noticed that some changes don't work with the other key fob (i.e. mirrors folding/unfolding when the car is locked/unlocked). Is there something else I need to do to get all the features to work with both key fobs? I was thinking of just copying my current profile to the other 2 profiles in the car.

[shawnsheridan]

Try these:

FRM => NSW_AUS_BEI_FL = nicht_aktiv
HU_NBT => STARTUP_EMBLEM = Variant 1

No coding is Fob specific, so I do not know what you have going on there.

[TomaGo]

Hello schwan,

I have on my 2015 X4 the '2TE AUTOMATIC TRANSMISSION W.GEARSHIFT'
Do you of i can code the Sport géra box 2TB ?

Thanks

Tom

[shawnsheridan]

Originally Posted by TomaGo

Hello schwan,

I have on my 2015 X4 the '2TE AUTOMATIC TRANSMISSION W.GEARSHIFT'
Do you of i can code the Sport géra box 2TB ?

Thanks

Tom

Not sure. It doesn't hurt to try it though an find out.

[Spitfire-]

Originally Posted by shawnsheridan

Try these:

FRM => NSW_AUS_BEI_FL = nicht_aktiv
HU_NBT => STARTUP_EMBLEM = Variant 1

No coding is Fob specific, so I do not know what you have going on there.

Thanks again Shawn! Those two changes worked!

For the fob issue, it was an user error on our part. Everything works as intended.

[ecsw]

i want to code 6NS to my F25. Got the cable, need link for latest e-sys link.
Shawn, may I get you to point me the right direction? Thanks.

[shawnsheridan]

Originally Posted by ecsw

i want to code 6NS to my F25. Got the cable, need link for latest e-sys link.
Shawn, may I get you to point me the right direction? Thanks.

PM sent.

[ecsw]

Shawn, 2 questions.

1. Following your guide on update 6NH to 6NS which requires changing FA. Step 9 when click on VCM Master Tab, Write FA FP, then I suppose to click on "Read FA FP VIN", but there is only "Read FA FP" button in the E-Sys 3.24.3 and there is also a "Read VIN" beside SVT Actual. Should I click on both buttons one after another?

2. After FA is written I am lost about the VO Code Head Unit and Standalone Combox?
I assume Read FA(OV) meaning under coding and then Read FA, Activate FA, then read SVT? and then Code under ECU?

May I get you to explain a little more on this step? Thanks.

[ecsw]

Never mind, went over your note again and I got it figured out.

VO as Vehicle Order.
Read FA, Active FA, Read SVT (so the list of available SVT shows), right click on HU ECU(HU_NBT in my case) and then Code. This takes about 30 seconds to process and it will reset my iDrive automatically.

Now I have "Office" showing up in iDrive and i can view Current Office/Email/Message/Notes.
6NH to 6NS successfully coded thanks to Shawn and April.

Now time for more advance options, wahahaha....

[shawnsheridan]

Originally Posted by ecsw

Never mind, went over your note again and I got it figured out.

VO as Vehicle Order.
Read FA, Active FA, Read SVT (so the list of available SVT shows), right click on HU ECU(HU_NBT in my case) and then Code. This takes about 30 seconds to process and it will reset my iDrive automatically.

Now I have "Office" showing up in iDrive and i can view Email/Message/Calendar/Notes.
6NH to 6NS successfully coded thanks to Shawn and April.

Now time for more advance options, wahahaha....

[Dexteryout]

Originally Posted by ecsw

Shawn, 2 questions.

1. Following your guide on update 6NH to 6NS which requires changing FA. Step 9 when click on VCM Master Tab, Write FA FP, then I suppose to click on "Read FA FP VIN", but there is only "Read FA FP" button in the E-Sys 3.24.3 and there is also a "Read VIN" beside SVT Actual. Should I click on both buttons one after another?

2. After FA is written I am lost about the VO Code Head Unit and Standalone Combox?
I assume Read FA(OV) meaning under coding and then Read FA, Activate FA, then read SVT? and then Code under ECU?

May I get you to explain a little more on this step? Thanks.

Any chance of the same guide?

[shawnsheridan]

Originally Posted by Dexteryout

Any chance of the same guide?

Sure:

http://f30.bimmerpost.com/forums/sho...65&postcount=9

[Dexteryout]

Nice one, guess what I'm doing tomorrow

[ecsw]

Just for fun and I updated the HUD to show incoming phone/name and able to scroll through the contact. But I couldn't remember if incoming call was already showing before I made the change....

Oh boy, this is so much fun....

[abcpop]

I replaced the Idrive button with the touch one.
I also added the language module and coded the NTB

All goes fine except that when dealer has to update, we need to uninstall and put old Itouch button, then after update reinstall Idrivetouch

Any idea what to add as option ?

Thanks

[shawnsheridan]

Originally Posted by abcpop

I replaced the Idrive button with the touch one.
I also added the language module and coded the NTB

All goes fine except that when dealer has to update, we need to uninstall and put old Itouch button, then after update reinstall Idrivetouch

Any idea what to add as option ?

Thanks

Thee is no option code for Touch Controller. Just VO Code NBT, ZBE, and TBX if you installed Handwriting Module too, with 0713 date.