08-31-2012, 10:06 PM | #2 |
Lieutenant Colonel
364
Rep 1,797
Posts |
I would concur with that. Don't do it
__________________
Previous Rides: 535xi, M235xi, X3, E92 M3, E70 X5 35d, X6 50i, X6 35i, E60 550i, E46 M3 Cabriolet, E39 540i, E36 328i
|
Appreciate
0
|
08-31-2012, 11:11 PM | #3 |
Lieutenant
54
Rep 554
Posts
Drives: 335D MSport 2016
Join Date: Sep 2011
Location: Ludlow
|
You can do it by hand but don't use a pressure washer. The under bonnet seals are not made to withstand high pressure.
|
Appreciate
0
|
09-01-2012, 06:12 AM | #5 |
Lieutenant Colonel
45
Rep 1,876
Posts |
I've wet mine with a gentle spray and then cleaned it up with a towel. Figure that can't be so much different than what gets in there when driving through a heavy rain storm.
__________________
Last edited by Nahoa; 09-01-2012 at 11:06 AM.. |
Appreciate
0
|
09-01-2012, 06:16 AM | #6 |
Private First Class
14
Rep 166
Posts
Drives: 2011 BMW X3 (F25) xDrive 28i
Join Date: Jun 2011
Location: Québec city (Canada)
|
|
Appreciate
0
|
09-01-2012, 01:12 PM | #9 |
Private First Class
10
Rep 120
Posts |
I have washed my car engines for 45 years with a pressure washer and never had a problem. Take it for what it is worth and I will continue to do it.
|
Appreciate
0
|
09-01-2012, 07:04 PM | #10 |
Private First Class
57
Rep 181
Posts |
What a coincidence. I just got an offer in the mail for an engine-bay cleaner. Apparently it comes in regular formula (which I'm guessing is a spray) and foam formula.
I had no idea this existed but I might give it a shot. |
Appreciate
0
|
09-02-2012, 07:51 AM | #11 |
Private
0
Rep 76
Posts |
I cover the visible plugs and elctric leads with regular shrink film from the kitchen, spray on a good-quality engine cleaner (I use Autoglym but I'm sure Zaino got it as well). Then I use my pressure washer set at low pressure and use it from a little distance. After that I use a soft brush to loosen dirt in the tight spots. One more careful treatment with the pressure washer and a gentle drying with an old cotton towel. Once or twice a year I also give all the plastic covers and panels a spray with plastic & rubber care spray and leave to dry.
I have been doing it this way with 4 cars over the last 5 years. Never had a problem but sure do have a clean engine bay most of the time |
Appreciate
0
|
09-02-2012, 04:19 PM | #12 | |
Lieutenant Colonel
352
Rep 1,684
Posts |
Quote:
Wet your rag with water and wipe. Spraying water inside the engine bay does not clean it any better then just spraying water on the exterior. You need to carefully wipe it. Plus, just spraying water is going to move contaminants from one area to another less protected area. |
|
Appreciate
0
|
09-03-2012, 12:18 PM | #13 |
Private
0
Rep 76
Posts |
It's maybe because I am not a native English speaker but I think Autoglym's instructions were quite easy to understand: "Autoglym Engine & Machine Cleaner is a ... ... cleaner for engines, components, wheels and machinery. Simply spray on, brush and hose off to rapidly dissolve oil, grease, grime and traffic film from all surfaces. "
But on the other hand, Zaino recommends not to hose down the engine bay: "I have heard different ways on cleaning the engine compartments, including hosing it down. I personally will never do that. Again, I am not saying my way is the best, but you can see from the pictures I get decent results." So there you go, even the product vendors seem to disagree on the topic. |
Appreciate
0
|
09-03-2012, 12:45 PM | #14 |
Love All
173
Rep 740
Posts |
Water is known to create corrosion on unpainted parts, electrical joints, actuators, valves, motors, starters, carbon brush holders, laminations, winding slots, motor air gaps ....
So be careful using a water wash unless you know what and where you are doing. |
Appreciate
0
|
09-03-2012, 02:04 PM | #15 |
Lieutenant Colonel
116
Rep 1,772
Posts |
I would suggest purchasing Plexus. Its a spray cleaner/polish intended for use on plastics. They typically sell it as a product to take care of motorcycle plastics. Very good stuff and way less chance for connectors, etc. getting water. Pressure washing under the hood is definately a bad idea... you will definately get water in places that aren't supposed to get water.
|
Appreciate
0
|
09-04-2012, 12:50 AM | #16 |
Lieutenant
30
Rep 427
Posts |
I use a spray detailer - wipes off easy and cleans the dirt etc from under the hood. The dirt "floats" on the spray and you can safely wipe it off.
__________________
2013 X3 3.5i AW,Msprt,rear fogs,PS,CP, Tech, etc...
Other cars 2005 S2000 2018 i3S |
Appreciate
0
|
09-04-2012, 10:24 AM | #17 |
Private First Class
3
Rep 160
Posts |
For 25 years I have been cleaning my engines with a hose and detergent. Usually when I change oil. Never had a problem on 15+ different cars. I don't cover anything. It's all designed to get wet.
I like a clean engine. It's easier to spot leaks and to work on
__________________
_____________________________________________
E90 328i Sport & Prem // R52 MINI S JCW // X3 x35i 62 Mini Cooper 997 // 62 Vespa // Laphroaig 30-yr |
Appreciate
0
|
04-14-2013, 05:25 PM | #18 |
New Member
0
Rep 16
Posts |
I am quite surprised at how dirty the X3 engine bay gets. Mine is 8 months old, just experienced its first Canadian winter, and the engine bay is full of mud everywhere. Even the underside of the hood has mud splattered on it. My previous car, an Acura TL, never had its engine bay get remotely this dirty.
So in my view, not cleaning it once a year, somehow, in some way, isn't really an option. |
Appreciate
0
|
04-15-2013, 08:52 AM | #19 |
Lieutenant Colonel
115
Rep 1,511
Posts |
Agreed, underhood is a bit of a mess but no more than any other car I've owned.
Just don't lift the hood.
__________________
2013, AW, xDrive35i, M Sport Package, Technology Package, Dynamic Comfort Package, Premium Package, 3M Clear Bra, Euro foglight switch, a few coded fixes
|
Appreciate
0
|
04-15-2013, 09:07 AM | #20 |
New Member
0
Rep 16
Posts |
I've only owned 3 cars in my lifetime, so my experience is limited. However my Honda Prelude and Acura TL engine bays were *far* cleaner after 5+ years than my X3's bay is after 8 months. I wonder if Honda auto engineers think about keeping the bay clean but BMW auto engineers don't?
Last edited by ings; 04-15-2013 at 01:47 PM.. |
Appreciate
0
|
04-15-2013, 03:30 PM | #21 |
*Bimmerpost Plasti Dip Guru*
84
Rep 1,174
Posts
Drives: E53, E46-M3, E70, F25-X3
Join Date: Jun 2011
Location: New Jersey (NJ)
|
I just wash it by hand :P
__________________
|
Appreciate
0
|
04-15-2013, 07:18 PM | #22 | |
Lieutenant Colonel
115
Rep 1,511
Posts |
My accord collected it's fair share of road grime and sand under hood. The buyer actually asked me if I drove a lot gravel back roads.
Quote:
__________________
2013, AW, xDrive35i, M Sport Package, Technology Package, Dynamic Comfort Package, Premium Package, 3M Clear Bra, Euro foglight switch, a few coded fixes
|
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|