[elefant]

Hi Shawn,

I have F25 2013. ISTA cannot see the EPS module.
The power steering is not working.
I have E_SYS 3.27.1 and LAUNCHER PRO 2.8.2.162.
My current I-level is F025-13-07-505.
My PSDZDATA doesn't have such a file.
Could you please send me a link to psdzdata with the file for my F25?

[shawnsheridan]

Originally Posted by elefant

Hi Shawn,

I have F25 2013. ISTA cannot see the EPS module.
The power steering is not working.
I have E_SYS 3.27.1 and LAUNCHER PRO 2.8.2.162.
My current I-level is F025-13-07-505.
My PSDZDATA doesn't have such a file.
Could you please send me a link to psdzdata with the file for my F25?

You do not need matching PSDZDATA version. You need PSDZDATA version >= to current I-Step. Use what you have, unless it is older.

[elefant]

Originally Posted by shawnsheridan

You do not need matching PSDZDATA version. You need PSDZDATA version >= to current I-Step. Use what you have, unless it is older.

I have psdzdata LITE, no I-step version 13-07-505, versions start with F25_20_03_540

[shawnsheridan]

Originally Posted by elefant

I have psdzdata LITE, no I-step version 13-07-505, versions start with F25_20_03_540

And F25-20-03-540 is >= to F25-13-07-505, so you can code with it.

[evanover]

Installed E-Sys. Installed launcher a d after you input pin and click on tool icon application automatically closes.

[shawnsheridan]

Originally Posted by evanover

Installed E-Sys. Installed launcher a d after you input pin and click on tool icon application automatically closes.

Set Launcher to Default Memory setting.

[evanover]

Even when set to default memory as soon as you click on hammer/wrench icon application closes and the only change saved is the path to E-Sys

[dmontesinos]

Originally Posted by shawnsheridan

S15A psdzdata covers G001.

Thanks for your reply. Will it work with my E-Sys version? How can I verify if my EntryNav unit has WiFi?
Thanks

[shawnsheridan]

Originally Posted by dmontesinos

Thanks for your reply. Will it work with my E-Sys version? How can I verify if my EntryNav unit has WiFi?
Thanks

Yes. As for WIFI, Check Label on Head Unit, or read ENTRYNAV2 HWEL and PM it to me.

[shawnsheridan]

Originally Posted by evanover

Even when set to default memory as soon as you click on hammer/wrench icon application closes and the only change saved is the path to E-Sys

I have no idea what you have going on there.

[evanover]

Running a fresh install of a Windows 10 VM only apps installed is ISTA+(4.29), INPA, and now E-Sys. Is there a newer version that is stable. If you click on the wrench and hammer icon after inputting the PIN the application closes, if you click in icon before PIN input then it brings up the box to input PIN and yo can verify it but that is it. The minute the PIN is input it closes the app. Do you have the the registry entries that are created and the values?

[shawnsheridan]

Originally Posted by evanover

Running a fresh install of a Windows 10 VM only apps installed is ISTA+(4.29), INPA, and now E-Sys. Is there a newer version that is stable. If you click on the wrench and hammer icon after inputting the PIN the application closes, if you click in icon before PIN input then it brings up the box to input PIN and yo can verify it but that is it. The minute the PIN is input it closes the app. Do you have the the registry entries that are created and the values?

There is your problem. Launcher PRO does not support Virtual environments.

If you use VMWare, you need to to add to the .vmx file the line:

SMBIOS.reflectHost = TRUE

[evanover]

I use VirtualBox

[shawnsheridan]

Originally Posted by evanover

I use VirtualBox

I don't know if Virtual Box has similar fix.

Switch to VMware or use ESysX instead of Launcher PRO.

https://esysx.com/product/esysx-32-64-bit/

[evanover]

I'm assuming it enables the physical hardware in the VM

[shawnsheridan]

Originally Posted by evanover

I'm assuming it enables the physical hardware in the VM

SMBIOS.reflectHost = TRUE passes through the manufacturer and model of the host rather than “VMware virtual platform” or whatever it would normally present for the model.

[MM2]

Hi Shawn
Is there a way to tell which of the full pzdata files, there are I think 31 at 4gb each contain data for my car f40 series?
Can I just download the one or two I need for my car opposed to all which I don’t have enough disk space for?
Thanks in advance

[shawnsheridan]

Originally Posted by Abarth695

Hi Shawn
Is there a way to tell which of the full pzdata files, there are I think 31 at 4gb each contain data for my car f40 series?
Can I just download the one or two I need for my car opposed to all which I don’t have enough disk space for?
Thanks in advance

Impossible. F40 files will not reside in any single part. You must download and extract entire psdzdata full. Use external HDD if you must.

[ladylyanna]

Do you still need windows 7 for this to work?

Thanks!

[shawnsheridan]

Originally Posted by ladylyanna

Do you still need windows 7 for this to work?

Thanks!

No. I use Win10 64-Bit myself.

[x3_M_SA]

Originally Posted by shawnsheridan

So long as your car has <= 51.3 on it, yes, they are still valid.

PM sent for cable and Token solution options.

Hi Shawn, I have e-sys 3.27.1, I require PsDz 5.01.02 and higher for my 2018 X3 G01. Please can you send me a link to an updated version.

Do you also know of cheat codes available for this car?

Thanks

[shawnsheridan]

Originally Posted by x3_M_SA

Hi Shawn, I have e-sys 3.27.1, I require PsDz 5.01.02 and higher for my 2018 X3 G01. Please can you send me a link to an updated version.

Do you also know of cheat codes available for this car?

Thanks

PM sent. Understand PSdZ and PSdZData are not same thing.

I do not have G01 Cheat Sheet.