Coding made Easy: A step by step procedure

shawnsheridan · 02-27-2019, 11:38 AM

Quote:

Originally Posted by TheCoolX3

If you would not mind sending me the instructions as well!

PM sent.

7Schläfer · 02-28-2019, 02:34 AM

Hallo Shawnsheridan,

would you like to send me the instructions too?

Best regards
7Schläfer

shawnsheridan · 02-28-2019, 09:31 AM

Quote:

Originally Posted by 7Schläfer

Hallo Shawnsheridan,

would you like to send me the instructions too?

Best regards
7Schläfer

PM sent.

docCarbon · 02-28-2019, 06:44 PM

To anyone who point me in the right direction

I want to write the vehicle VIN to a used FRM.

FSC extended-> diag address: 0x72, it populates FRM. Where do I locate the appropriate application ID and upgrade index (0x1)?

-> WriteDataByIdentifierVIN -> start..

F30ed · 03-01-2019, 03:20 PM

To General Shawnsheridan:

Sir, Would you mind to share the instructions with me also, Sir.

Thanks
Ed

shawnsheridan · 03-01-2019, 04:30 PM

Quote:

Originally Posted by docCarbon

To anyone who point me in the right direction

I want to write the vehicle VIN to a used FRM.

FSC extended-> diag address: 0x72, it populates FRM. Where do I locate the appropriate application ID and upgrade index (0x1)?

-> WriteDataByIdentifierVIN -> start..

You don't. "application ID and upgrade index (0x1)" is only for FSC Codes.

shawnsheridan · 03-01-2019, 04:40 PM

Quote:

Originally Posted by F30ed

To General Shawnsheridan:

Sir, Would you mind to share the instructions with me also, Sir.

Thanks
Ed

PM sent.

E60525d · 03-02-2019, 06:11 AM

Does anyone know how to code the headlight washer off?

On the F30 it is ww scheinwerferreinigung.

Anyone know what ECU it is in?

florincosta · 03-02-2019, 04:15 PM

What kind of codes do I need to be able to change the color of instrument cluster and hud from orange to white all the time?I tried DIM_NACHT_EIN werte = 32 in werte = FF but it does not work and HINTERGRUND_FARBE_TAG does not appear in dkombi. can i change or try for nothing? Car is F10 2010 with cic and board was changed with 6wb

Almaretto · 03-03-2019, 02:32 AM

Quote:

Originally Posted by florincosta

What kind of codes do I need to be able to change the color of instrument cluster and hud from orange to white all the time?I tried DIM_NACHT_EIN werte = 32 in werte = FF but it does not work and HINTERGRUND_FARBE_TAG does not appear in dkombi. can i change or try for nothing? Car is F10 2010 with cic and board was changed with 6wb

Pre-2014 software.

momoboy · 03-05-2019, 07:36 AM

Shawn, my dealer just updated my software and erased all my coding. Would you please send me the link to the latest software please? Thanks!

shawnsheridan · 03-05-2019, 09:42 AM

Quote:

Originally Posted by momoboy

Shawn, my dealer just updated my software and erased all my coding. Would you please send me the link to the latest software please? Thanks!

PM sent.

docCarbon · 03-07-2019, 08:54 PM

Shawn can I flash a new FRM module with ISTA-P and an ENET cable? Esys is having problems with it because the I-step isn't what was expected?

shawnsheridan · 03-07-2019, 09:04 PM

Quote:

Originally Posted by docCarbon

Shawn can I flash a new FRM module with ISTA-P and an ENET cable? Esys is having problems with it because the I-step isn't what was expected?

Yes, possible.

docCarbon · 03-07-2019, 10:02 PM

I put the newest psdzdata back into the folder and was actually able to complete the SVT/KIS calculation for once. It was able to inject the CAFD into the FRM too. I'm not sure if this is because it's a new FRM module but thank you for your insight. Could I please get a link to ISTA-P anyway? I have ISTA+ but no ICOM cable to make use of the programming side.

shawnsheridan · 03-07-2019, 10:02 PM

Quote:

Originally Posted by docCarbon

I put the newest psdzdata back into the folder and was actually able to complete the SVT/KIS calculation for once. It was able to inject the CAFD into the FRM too. I'm not sure if this is because it's a new FRM module but thank you for your insight. Could I please get a link to ISTA-P anyway? I have ISTA+ but no ICOM cable to make use of the programming side.

Sorry, I cannot help with ISTA.

srw1mpo · 03-12-2019, 01:53 PM

Hi shawnsheridan.

Could i get the links please.

Thanks

shawnsheridan · 03-12-2019, 01:57 PM

Quote:

Originally Posted by srw1mpo

Hi shawnsheridan.

Could i get the links please.

Thanks

PM sent.

srw1mpo · 03-12-2019, 02:04 PM

Quote:

Originally Posted by shawnsheridan

PM sent.

That was quick, many thanks

Emilr · 03-12-2019, 07:15 PM

Quote:

Originally Posted by shawnsheridan

Quote:

Originally Posted by 7Schläfer

Hallo Shawnsheridan,

would you like to send me the instructions too?

Best regards
7Schläfer

PM sent.

Can u send to me too?

shawnsheridan · 03-12-2019, 07:35 PM

Quote:

Originally Posted by Emilr

Can u send to me too?

PM sent.

amerln · 03-15-2019, 11:21 AM

In a 8/2015 full LED I wanted to code the welcome light with front and mirror turn indicators. Is it possible?

Welcome Light 1 in TMS is: 00 0F 00 00 00 0F 00 00 00 0F 00 00 2E 04 00 00
Blinker + DWA-blinken are: 64 03 00 00 00 0F 00 00 00 0F 00 00 00 0F 00 00

02-28-2019, 02:34 AM	#2510
7Schläfer Registered 0 Rep 2 Posts Drives: BMW X3 F25 30d Join Date: Feb 2019 Location: Germany iTrader: (0)	Hallo Shawnsheridan, would you like to send me the instructions too? Best regards 7Schläfer
	Appreciate 0 Quote

02-28-2019, 06:44 PM	#2512
docCarbon New Member 0 Rep 9 Posts Drives: x3 35i, MaxPsi M3 Join Date: Apr 2012 Location: Nebraska iTrader: (0)	To anyone who point me in the right direction I want to write the vehicle VIN to a used FRM. FSC extended-> diag address: 0x72, it populates FRM. Where do I locate the appropriate application ID and upgrade index (0x1)? -> WriteDataByIdentifierVIN -> start..
	Appreciate 0 Quote

03-01-2019, 03:20 PM	#2513
F30ed Second Lieutenant 71 Rep 230 Posts Drives: F30 328i, X3 35M Join Date: Sep 2015 Location: Chicago iTrader: (0)	To General Shawnsheridan: Sir, Would you mind to share the instructions with me also, Sir. Thanks Ed
	Appreciate 0 Quote

03-02-2019, 06:11 AM	#2516
E60525d Lieutenant Colonel 289 Rep 1,533 Posts Drives: 330d M Sport LCI Join Date: Mar 2010 Location: UK iTrader: (0)	Does anyone know how to code the headlight washer off? On the F30 it is ww scheinwerferreinigung. Anyone know what ECU it is in?
	Appreciate 0 Quote

03-02-2019, 04:15 PM	#2517
florincosta Registered 0 Rep 3 Posts Drives: f10 Join Date: Oct 2015 Location: romania iTrader: (0)	What kind of codes do I need to be able to change the color of instrument cluster and hud from orange to white all the time?I tried DIM_NACHT_EIN werte = 32 in werte = FF but it does not work and HINTERGRUND_FARBE_TAG does not appear in dkombi. can i change or try for nothing? Car is F10 2010 with cic and board was changed with 6wb
	Appreciate 0 Quote

03-05-2019, 07:36 AM	#2519
momoboy Private First Class 69 Rep 164 Posts Drives: F15 35i 2017 Join Date: Mar 2015 Location: NJ iTrader: (2)	Looking for latest version of ESYS Shawn, my dealer just updated my software and erased all my coding. Would you please send me the link to the latest software please? Thanks!
	Appreciate 0 Quote

03-07-2019, 08:54 PM	#2521
docCarbon New Member 0 Rep 9 Posts Drives: x3 35i, MaxPsi M3 Join Date: Apr 2012 Location: Nebraska iTrader: (0)	Shawn can I flash a new FRM module with ISTA-P and an ENET cable? Esys is having problems with it because the I-step isn't what was expected?
	Appreciate 0 Quote

03-07-2019, 10:02 PM	#2523
docCarbon New Member 0 Rep 9 Posts Drives: x3 35i, MaxPsi M3 Join Date: Apr 2012 Location: Nebraska iTrader: (0)	I put the newest psdzdata back into the folder and was actually able to complete the SVT/KIS calculation for once. It was able to inject the CAFD into the FRM too. I'm not sure if this is because it's a new FRM module but thank you for your insight. Could I please get a link to ISTA-P anyway? I have ISTA+ but no ICOM cable to make use of the programming side.
	Appreciate 0 Quote

03-12-2019, 01:53 PM	#2525
srw1mpo New Member 0 Rep 6 Posts Drives: F10 529d Join Date: Aug 2018 Location: UK iTrader: (0)	Hi shawnsheridan. Could i get the links please. Thanks
	Appreciate 0 Quote

03-15-2019, 11:21 AM	#2530
amerln New Member 8 Rep 12 Posts Drives: 45e Join Date: Apr 2018 Location: xDrive Mountain iTrader: (0)	In a 8/2015 full LED I wanted to code the welcome light with front and mirror turn indicators. Is it possible? Welcome Light 1 in TMS is: 00 0F 00 00 00 0F 00 00 00 0F 00 00 2E 04 00 00 Blinker + DWA-blinken are: 64 03 00 00 00 0F 00 00 00 0F 00 00 00 0F 00 00 Last edited by amerln; 03-18-2019 at 04:24 PM..
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search