10-18-2012, 10:13 AM | #1 |
Private
9
Rep 85
Posts
Drives: 2022 X3 M40i
Join Date: Sep 2011
Location: Florida
|
Flasher Relay for 2013 F25?
I would like to change my front/rear turn signals and brake lights from the OEM incandecent bulbs (7506 and 7507) to LED's. I have the Xenon HID's which was included in one of my packages. Question: Does anyone know if the OEM Flasher relay will support LED's? If not, where is the Flasher relay located and can it be switched to a new Relay that will support LED's (without giving a bulb out error)? Bottom line is that I don't want to cut wires and install Load resistors for the turn signal bulbs.
|
10-18-2012, 01:00 PM | #3 |
Private
9
Rep 85
Posts
Drives: 2022 X3 M40i
Join Date: Sep 2011
Location: Florida
|
Thanks, I have researched it but there does not appear to be any with built in resistors for the front Turn/Parking bulbs (7507) they are only available for the rear (7506). In my research an option is to change the Flasher Relay then you do not require load resistors at all but, I have not been able to find the flasher on the F25, nor do I know if that is an option on this vehicle.
|
Appreciate
0
|
10-20-2012, 10:58 AM | #4 | |
Enlisted Member
10
Rep 33
Posts |
Quote:
Concerning the front flashers bulbs my experience (of X3 European model) is that you don't need parallel resistors if you change the original P21W bulbs to LEDs |
|
Appreciate
0
|
10-22-2012, 10:52 AM | #5 | |
Private
9
Rep 85
Posts
Drives: 2022 X3 M40i
Join Date: Sep 2011
Location: Florida
|
Quote:
|
|
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|