03-04-2024, 07:49 PM | #1 |
New Member
2
Rep 27
Posts |
Removing grilles from 12 F25
Hey all .... just need some info about removing the grilles. I'm a pretty damn good mechanic, Ill admit the X3 is new to me.
I swear it looks like you practically have to pull the whole front cover assy. to access the tabs that need to be relieved to pop the grilles out. It cant be that complicated ?? I removed a bunch of bolts across the top , above radiator, plastic trim piece. No luck ... Any tips would be nice. thanks |
03-04-2024, 09:07 PM | #2 |
Colonel
961
Rep 2,652
Posts
Drives: Z4MC, X3-35i,525i, Corrado G60
Join Date: Nov 2007
Location: MD
|
Use a hose tool or a flat blade screw driver bent in a U-shape through the front of the grille to unlatch the clips.
|
Appreciate
0
|
03-05-2024, 02:13 PM | #4 |
New Member
2
Rep 27
Posts |
Im sure I can probably make a tool like that. SO.... put it between the slats and pull UP ? on the clips, or, toward the center of the grill ???
Looks like theres about three clips at the top and three at the bottom ?? Thanks for the tip ... |
Appreciate
0
|
03-05-2024, 02:25 PM | #5 |
First Lieutenant
183
Rep 322
Posts
Drives: E46 M3 & LCI X3 35i M Sport
Join Date: Jul 2014
Location: South Florida
|
Mine was an LCI X3 and it was quite literally impossible to use any tool to release the grill fully without taking the bumper off.
After reading a million forum posts someone said to get as many clips as you can (I think I only got the top 2 after pulling the bumper back) and then yank the grill (by the slats) outwards towards with two hands. They both popped right out, I think I broke maybe 1 tab on each grill. I'm convinced it is not possible to remove an LCI grill "the right way" without removing the bumper. Pre-Lci, i'm not sure. |
Appreciate
0
|
03-05-2024, 02:29 PM | #6 | |
First Lieutenant
183
Rep 322
Posts
Drives: E46 M3 & LCI X3 35i M Sport
Join Date: Jul 2014
Location: South Florida
|
Quote:
2/3 on top, 2 on each side, 2/3 on the bottom. (look at the substitute grills for an idea of where they're located) In my experience the top ones are doable, the rest are impossible. Maybe I'm just being negative. |
|
Appreciate
0
|
03-05-2024, 06:38 PM | #7 |
New Member
2
Rep 27
Posts |
OK, Its OFFICIAL !!!! You are NOT getting the grilles out without taking the cover off !!!!!!!!!!
I pulled the top 6 bolts across the top and yes, I did release the top 3 grille clips, but the side and bottom ones, FORGET IT !!!!!!!!! I made a tool similar to the one you posted and NO LUCK !!!!!!!!! If someone is in my area of Central Oregon and wants to come and show me how its done, Ill even pay you ! I just want to pull my grilles so I can separate them and leave the outer rim chrome-ish and paint just the slats black ! Sorry guys, their not coming out !! I tried most of the day !! Thanks |
Appreciate
0
|
03-05-2024, 07:46 PM | #8 | |
Colonel
961
Rep 2,652
Posts
Drives: Z4MC, X3-35i,525i, Corrado G60
Join Date: Nov 2007
Location: MD
|
Quote:
Sure it would be much easier to get to the clips with the cover off, but it IS doable with the cover in place. Start at the top and do it on a warm day so the plastic is more flexible. |
|
Appreciate
0
|
03-06-2024, 06:52 AM | #9 | |
First Lieutenant
183
Rep 322
Posts
Drives: E46 M3 & LCI X3 35i M Sport
Join Date: Jul 2014
Location: South Florida
|
Quote:
I'm telling you all it works, undo the top clips then just grab firmly and pull towards you. |
|
Appreciate
0
|
03-06-2024, 08:04 PM | #10 |
New Member
2
Rep 27
Posts |
OK.... Im not right... again ! SO..... I am not one who does not like to feel I cannot do something ! SO.. i went back at it and pulled back the upper edge of the cover farther and wedged my long screwdriver down there and released the 3 top clips and 2 side clips and rigged up a stiff wire bent to shape to release the bottom ones.
I guess I just didnt curse enough, it ALWAYS helps I have found this to be true !!!!! Then separating the chrome surround from the grayish center section\ the slats, so I could paint the slats matte black and leave the chrome surround. Thats the look I am after !!! SO... Im off to paint after hours of cleaning !! Ill do my best to take some pics and post them when Im done .. Thanks guys for all your advise on my project... |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|