[________]

Originally Posted by StrayCatNOR

Did replace pads on both rear calipers and changed the sensor successfully.
Reset the brakes pads on board computer also went ok.
Did press the brake pedal 5 times so it got hard before starting engine.
BUT my brakes feel mushy when driving.
I did not bleed the brakes.

I have changed brake pads on my other cars. Never had to bleed them, except when i replaced the calipers.

Any suggestions?

No bleed necessary.

Did you check the fluid level before and after? Sometimes people will fill up the fluid incorrectly, and when you put new pads the fluid overflows.

But my first thought was really pads needing to be beded in.