View Single Post
      10-14-2018, 06:11 PM   #4
doodlebro
Lieutenant
United_States
121
Rep
470
Posts

Drives: '17 X3 35i
Join Date: Mar 2017
Location: Denver

iTrader: (1)

Quote:
Originally Posted by OnerDriver View Post
My dash cams are tapped on the fuse boxes, with a "tap-a-fuse" type wire. I then bought a power-outlet (like the cigarette lighter socket) for 10 bucks or so to use the same charger that comes in the box with the dash cam.

Both hidden in the fuse boxes, one behind the glove box and the other one behind the carpet panel on the passenger side in the trunk.

Wires hidden behind the rubber seals on the doors.

Good luck.
This is what I did too. Run the cable from top of windshield along the headliner and into the A-pillar before the rubber in the doors. Then route to the glovebox fusebox with an add a fuse.
__________________
Current mods
Rockford Fosgate P3 // JBL MS-A5001 // MiniDSP
Ultra Racing Strut Brace // AFe Pro Dry S // PS2 // Custom Inlet // DV+ // FTP Boost Pipes // VRSF Race IC // VRSF Downpipe // ECUTek Protune @ 5280'
Appreciate 1
________4158.50