Quote:
Originally Posted by lo_cheng
Quote:
Originally Posted by MdW86
Problem with the accidental opening of the trunk is that the time thats required to press the remote button is too short.
I would like to set the needed time to 5 sec or something.
I found this on another forum
"For a coding solution, change FEM_BODY > RC_TIME_DELAY_BOOTLID to Werte=FF. You now need to keep the button pressed for a full 25 seconds (which is unlikely to happen by accident) in order for the trunk to open. The default setting opens the trunk after the button is pressed for 0.5 seconds."
Whats the logic on the Werte? Could i set it to 4/5/6?
|
Interesting
Werte mean VALUE
FF if it is HEX, covert to DEC it is 255
So if we want 5 sec, the value should be 32?
Werte=32 will give us 5 sec delay? |
Yeah it's probably deciseconds, in hex.
I was thinking I should change mine, but reasoned that if I am pressing it in a pocket or similar, it might be much longer than the time I would like to press the button to open it, so a better solution would be to code it to only open if car is unlocked.