|
Its not needed in the 22 models, For the gauge cluster going to have to search, Dim_variable seems right, set brightness up.
But the following is available:
#1
For the idrive screen;
1- start bimmercode app and connect and select BMW for car
2- select BMW X3/X3M (or X4/X4M)
3- select Headunit
4- select Expert Mode at top
5- select 3005 DISPLAY_PIP_CONFIG
6- scroll WAY down and select DIM_VARIANT (or search)
7- change setting from NEW to OLD
8- click OK.
9- Then backup on screens to the HEADUnit ECU screen.
10- select CODE at top right. Accept risk and let it do its thing.
It will wipe out the 8 hot keys so you will need to remember what you set them to. This will enable the Brightness control to be used during Daytime. It will now say Brightness versus Brightness during Nighttime. If the dealer ever does a ECU flash you will have to redo this,
|