Quote:
Originally Posted by shawnsheridan
F06 should work. Connection is made with same ENET cable.
First, edit C:\EDIABAS\Bin\EDIABAS.INI to read:
Interface=ENET
Then, assuming the fault condition no longer exists, to clear the fault code.
1) Launch C:\EDIABAS\Bin\TOOL32.EXE
2) Hit F3
3) Load C:\EDIABAS\Ecu\F01.PRG
4) In the "Select Job: F01" window, select FS_LOESCHEN_FUNKTIONAL
5) Hit F5
6) "Results" window should show "JOB_STATUS = OKAY"
Hopefully, Problem Solved.
Note: fs_lesen_funktional only read fault codes, FS_LOESCHEN_FUNKTIONAL will delete it.
|
Thank you. Great. It solved the problem