Quote:
Originally Posted by 95wildtt
Quote:
Originally Posted by 2kaccordocoupe
You got the general idea. Since we have the hatch latch built into the emblem I didn't know if the procedure would be different. Looks pretty straight forward.
The whole latch assembly can also be removed if needed, I can get that info if you need it. I don't think you need to remove the whole thing.
|
Hi,
I've replaced mine (after painting it) and it's WAY more involved than the normal process for other roundels.
Guess it's the price we pay for having the cool switch built into the roundel.
The tape and trim tools will NOT work for this, sorry...
You need to remove the large plastic trim piece on the inside of the hatch lid and it's a process, but not bad if you take your time.
There are a few screws and several clips...
After removing this, you will see the panel that holds the roundel and you will need to remove a couple of bolts that hold it in place, no tape is involved.
From there it's pretty straight forward to replace and put back together.
It's probably a 2 hour job, but well worth it.
PROBABLY A GOOD IDEA FOR 2kaccordocoupe TO GET THE INFO FROM TIS.
Hope this helps,
John |
Now you're scaring me 🤣🤣🤣🤣 thanks for the advice.