Quote:
Originally Posted by Dawgz
Hey, used the following:
https://www.dropbox.com/s/3bufcjcg3o...re.img.gz?dl=1
It has to be used in a raspberrypi 3 B, not B+ or raspberry pi 4.
I tried in a raspberry pi 4 and it didn't work.
Made a much better holder for it to fit into the rear cupholder, flush with a 30mm fan for chipset cooling.
|
This is awesome!
Did you manage to change the WiFi ID name ?
I tried to burn image to my old wifi agent but couldn't figure out how to ssh to raspberry.local anymore
Quote:
Originally Posted by Dawgz
Tested the revision that Paul sent, no more knocks during the pull. Went from 2k rpm in 3rd all the way to 7k, shifted to 4th went all the way to 7k shifted to 5th. No knocks. AFRs seem a little better but still a bit lean on the lower RPMs when on WOT.
Also another new thing that i noticed was the car is registering knock on the data logger at lower RPMs, like when im getting off a traffic light, touch the pedal a bit to have some engine load and the AFRs are getting as lean as mid 15s before causing knock to register. Was scary just driving home.
I've sent Paul the note - hopefully he can sort this out also.
|
Yep lower rpm these cars run lean even from factory