Quote:
Originally Posted by wxm
Thanks for the write up. I am about to do the same for my 2017 X3 (xDrive N20) and I have the following two question:
(1) Anyone has the torque spec for the supporting bracket fastener. I thin the drain/fill plugs should be torqued at 60nm. but I don't have those for the supporting bracket.
|
Bolts securing the brace to body are 19nm, the through-bushing bolt/nut is 68nm. All drain/fill plugs are 60nm.
https://www.newtis.info/tisv2/a/en/f...r-box/Gu6Rx77O