Dinan BMW F9x X3M/X4M Springs/Bumpstops
Part Number(s): D100-0935 & D193-9701
Applications: - 2020-2021 F97 X3M
- 2020-2021 F97 X3M Competition
- 2020-2021 F98 X4M
- 2020-2021 F98 X4M Competition
Product Page(s) / Pricing: Release Date: Begin shipping 5/20/21!
Description: Suspension systems that not only transform the stance of the vehicle but also maintain ride quality and improve upon handling are what Dinan suspensions are known for. This is accomplished by pairing springs sets with bump stops spring perches or both to maintain suspension travel resulting in a smooth ride while also improving mechanical grip and handling. This is what makes Dinan suspension systems unique. While we are able to sell each component separately, it is highly recommended that both the spring sets and the supplemental ride quality and handling kits are used in tandem in order to maintain the Dinan quality standards our customers are used to. Experience the Dinan difference with this combination and enjoy the ride it provides.
Dinan's Performance Spring set for the F97 X3M and F98 X4M provides greater control over body roll by virtue of carefully calibrated spring rates. Additionally, Dinan lowers the car for improved suspension geometry and an even more aggressive stance. The Dinan springs are CNC wound with high tensile chrome silicon wire and shot-peened for stress relief to last the life of the car. The increase in stiffness will reduce the rear suspension compression under acceleration and front suspension compression (or dive) under braking, giving your car a more controlled feel. The Dinan performance springs will also provide a noticeable improvement in grip for high-speed driving situations that will inspire confidence in your car's capabilities. The reduced body roll makes the steering more responsive to driver input and will be noticed at low speeds up to the top speed of the vehicle.
NOTE: Dinan Performance Spring sets should be purchased and installed with the corresponding Ride Quality and Handling Kit to achieve the advertised ride height performance and ride quality. While not explicitly required, if the matching component is not purchased and installed you will get less than favorable results in the form of poor ride quality and improper handling traits. While we will maintain a full warranty on product defects any claims against the cars improper handling ride quality traits due to not purchasing the corresponding handling kit will not be warranted.
Features/Benefits:
- Vehicle lowered 1" in the front and rear.
- 20% increase in spring stiffness in front and rear.
- Substantial reduction in body roll.
- Preset to prevent spring sag.
- Compatible with factory electronic shocks (M Adaptive Suspension).
Dinan BMW F9x X3M/X4M Tension Strut Ball Joint Kit (Monoballs)
Part Number(s): D280-0023
Applications: - 2020-2021 F97 X3M
- 2020-2021 F97 X3M Competition
- 2020-2021 F98 X4M
- 2020-2021 F98 X4M Competition
Product Page(s) / Pricing: dinan.info/F97-TSBJ
Release Date: Available Now!
Description: An underrated component of a proper driver's suspension the monoball kit (tension strut ball joint kit in today's terminology), is a remnant of an era when road feel was something desirable and sought after. Drivers wanted the visceral feel of being connected to the road as the road-racing heritage of BMW M demanded. Dinan embraced this and over the years mastered its craft into a kit that not only satisfied the desire for proper road feel but also made it livable for everyday driving. While stock suspension properties may have swayed from its golden era lineage to more mainstream ideals, Dinan is here to correct those mistakes for those that want a more M-passioned BMW experience.
The Dinan Tension Strut Ball Joint Kit provides responsiveness you can feel by replacing the rubber bushings in the thrust arms with precision ball joints and machined aluminum housings. Improves responsiveness by eliminating the deflection inherent in the stock rubber bushings while also reducing brake shimmy. The quietest bearings on the market are virtually noise-free so you can live with them every day. These are the only bearings on the market that are sealed using a rubber boot to keep out dirt and road grime stopping them from wearing out prematurely.
Features/Benefits:
- Improved steering responsiveness.
- Reduces brake shimmy.
- Nylon-lined bearings for quiet operation.
- Machined aluminum housings.
- Sealed bearings.
