Quote:
Originally Posted by ///Mposter
DIY rear brakes for the 2011 BMW x3 (35i ) chassis F25.
...
Now clip in the EHbrake sensor on both sides. Put car to on/accessory by tapping the start button once. Put the hand brake on and listen for the EHbrake system to rotate and lock the brakes. It will be abnormally longer the first time. Cycle it a few times until it is normal (short cycle). Start the car and pump the brakes. Check to see if there is any weird noises before putting the tires on. Go back and check your work if you do hear something .
|
I replaced by rear rotors, pads, and sensor. But, when I started my 2011 x3,
neither my parking brake or Auto H function works. I only get a warning messages when trying to use Auto H, "manually apply brakes". The parking brake still works as an e-brake when I pull it when in drive.
Any experience with this?