Quote:
Originally Posted by mdchino
I gave what I found from the M2 forums a shot. The following is very simple and *seems* to have worked.
One thing to keep in mind is I read that this does not work with automatic high beam assist, so I did not change that option and left that as default.
Coding for VLD:
Front Electronic Module > Expert Mode >
3073 LaMaster1 > LUT_FLC_FORWARDLIGHTING_Y > 9C,9C,9C (All 3)
3073 LaMaster1 > C_AFS_ENA > Enable (All 3)
Coding for GFHB:
Front Electronic Module > Expert Mode >
3073 LaMaster1 > C_HBA_ENA > Enable (All 3)
3073 LaMaster1 > C_HBA_GRHB_ENA > Highway_Standby_AFS
3073 LaMaster1 > C_HBA_ADAPT_SHUT_ENA > Enable
Note: You'll see two blue check marks next to some of these. Press the top one. It will uncheck the one below it. Now you can enable one of the two 'enable' options (if there are two or three). Back out. Go back in. All 3 correct selections should have the blue check mark next to them.
Some of the latter were already enabled for me ¯\_(ツ)_/¯ so did not require changing.
|
Ok. When I code VLD and NGHB, I VO code BDC, FLA or KAFAS, and both FLM with 8S4 & 5AP removed from FA. Then, I apply 200 FDL changes to FLM.