|
In my case (F25 LCI) it looks like this now:
AUSG_11(12)_NSW_EINSCHALTSTROMRED.. aktiv 0x01
AUSG_11(12)_NSW_L(R)_IS_LED aktiv 0x01
AUSG_11(12)_NSW_L(R)_IS_INDICATOR nicht_aktiv 0x00
AUSG_11(12)_NSW_L_(R)_IS_XENON nicht_aktiv 0x00
AUSG_11(12)_NSW_L_(R)_KALT_UEBERW_AKTIV nicht_aktiv_vor_lci 0x00 nicht_aktiv_ab_lci 0x00
AUSG_11(12)_NSW_L(R)_KURZSCHLUSS wert_01 0x9A
AUSG_11(12)_NSW_L(R)_OPENLOAD wert_01 0x1E
AUSG_11(12)_NSW_L(R)_PART_OPENLOAD wert_01 0x7F
AUSG_11(12)_NSW_L(R)_VORGLUEHEN_AKTIV nicht_aktiv 0x00
AUSG_11(12)_NSW_L(R)_WARM_UBERW-AKTIV nicht_aktiv_vor_lci 0x00 nicht_aktiv_ab_lci 0x00
DUAL_SPG_AKTIV_NSW nicht_aktiv 0x00
FLB_NSW nicht_aktiv 0x00
DUAL-DUMP_SCHUTZ_NSW aktiv 0x01
NSW_AUS_BEI_FL nicht_aktiv 0x00
U_EFF_NSW wert_02__100% 0x32
WL_FUNKTION_NSW nicht_aktiv 0x00
I hope everybody understands what I mean 11(12) or L(R) - just did not want to expand everything double that size. Also I want to say that I didn’t post this unless was waiting for response from BimmerCode, though after request fro one of members I share it here. It works ok, though I am not sure how bright should it be. Anyway, flickering is gone. Note: my car is without cornering lights function. This is purely my experience which I share and would not take any responsibility if anything goes wrong while you coding your car yourself. Always use backup restore function if something is not working after coding.
|