[Lorenas]

As I have mentioned before after retrofitting genuine LED fog lights, coded with BimmerCode for LED lamps also warm and cold check on nonexpert mode. Error messages gone but flickering after some 20sec from start was a problem to deal with. With some help from BimmerCode team and some tinkering I have now working trouble free original LED fogs. See coding below.


In my case besides of:
NSW_L_KALTUEBERWACHUNG » nicht_aktiv
NSW_L_WARMUEBERWACHUNG » nicht_aktiv
NSW_L_KURZSCHLUSS » nicht_aktiv
NSW_L_IS_LED » aktiv
NSW_R_KALTUEBERWACHUNG » nicht_aktiv
NSW_R_WARMUEBERWACHUNG » nicht_aktiv
NSW_R_KURZSCHLUSS » nicht_aktiv
NSW_R_IS_LED » aktiv

Needed to code this:
AUSG_12_NSW_R_VORGLUEHEN_AKTIV aktiv>>nicht aktiv
Same thing with
AUSG_12_NSW_L_VORGLUEHEN_AKTIV aktiv >>nicht altiv

Update: it looks like flickering’s gone while fog lights come with low beam. If turn on position lights with fog lights (rings + fogs) then flickering starts after a while). I will check and update if I find coding.