Quote:
Originally Posted by ttx3m
Was able to get the lip installed today. It took a bit longer as I did it alone. Did not use a lift nor did I jack up the car. Took my time to get it aligned and use painters tape as a guide to get it where i wanted.
The lip came with pre drilled holes which I had assumed a couple would have been for the the stock bolts but that was not the case. All pre drilled holes took self tapping screws which they provided. Instead of a power drill I used a small hand drill bit that I had which worked really well.
After mocking it up I used a few strips of 3m tape on the areas where the lip would make contact with the bumper. This also helped to get it aligned and hold it up enough to drill and use the provided screws.
Overall, another quality part and I’m happy with the outcome!
|
Be careful, this CF is addictive (and expensive).