Quote:
Originally Posted by aaron84
Hello again guys, I apologise for putting this message here but the chat that is most suitable isn't getting any traction. I've looked around and cannot find anyone with my exact issue.
I've got an f83 and wanted hba so I installed the indicator stalk with hba button. Installed the fla camera and wired it up for pin 4 and 5 from the mirror to pin 50 and 49 respectively of A173*8B of the FEM. I used scotch locks from bmw for the connection to the fem. As for coding, I added 5ac to the FA. When I go to create cafd file, I checked my car's I step level and confirmed it to be F020-17-07-504. My issue is when I open the caf selection list, my i-step level doesn't come up on the list. The last one on the list is F020-17-03-509. I picked that and hoped for the best. When I detect svt and all the ecu's show up, at the top it shows 27 ecu's in blue, suggesting their fine and 1 ecu in red, which I'm sure is FLA3. I'm assuming it's either because I didn't have the correct cafd to select from or I just screwed up somewhere else, which is entirely likely knowing myself. I'd love to benefit from all your experiences of working with e-sys so I can get mine working. I'm using psdzdata version 4.32.33 lite and e-sys 3.30.1-49938.
Thanks guys
|
When you Read (ECU), not Read (VCM), all of FLA is Red? Nothing is Blue?