Quote:
Originally Posted by sys64738
Ok so after trading E-mails with BG @ RGSport this morning, it appears I had some things wrong. First, I was measuring my rake based on my adjuster gap difference, which isn't the right way to do it. Rather, I should have been measuring the actual drop as measured from center of wheel.
Second, my assumption that the adjuster gap should be lower in the front than the rear is incorrect. If you keep a 25mm adjuster gap front and rear, it results in a 15mm rake in front according to Ben. He explained that this was due to the spring design and spring rate. If you lower the rear to 20mm adjuster gap, it results in a 6mm rake.
So, that's what I am going to do. Will report back.
|
Looking forward to your report