Quote:
Originally Posted by TonySCV
Thanks so much for putting this together. So basically, if I want to do this swap (I have DAP + heated steering), I would need to order all of these parts:
wheel 32-30-8-094-548
buttons 61-31-7-854-189
button screws 32-30-6-884-696
top cover 32-30-7-856-289
connecting line 61-12-8-038-912
trim 32-30-7-856-291
hex bolt 32-30-6-795-924
screws 32-30-8-090-405
airbag (possible alternate 2017 part 32 30 7 855 725) 32-30-8-091-251
control electronics 61-31-7-857-778
vibration generator 61-31-7-856-691
and find someone who will install them. Correct?
Am I correct that coding will NOT be required given it's a swap with no feature changes?
|
That's correct, to go new you'd need all of those, and then someone to assemble them and install the part. The internal wiring can be a bit tricky to fit everything in its place. It helps to have an existing wheel to look at, or maybe the dealer has copious docs that would detail it.
You'd only need coding to change airbag stages, if you can acquire the 251 airbag you'd be good to go with just a hardware swap.