[abcpop]

Originally Posted by shawnsheridan

Yes, your NBT firmware supports Touch Controller.

F10-14-03-503 is both 52.3 and 52.4, meaning F10 received no update in 52.4, meaning 52.3 is still current. Only i3 / i8 received update in 52.4.

Fantastic ! How do you know all this ?
Many thanks

[abcpop]

New Question:

On F06 there is a button on trunk. This button can only lock car doors.
Is is possible to make it more clever ? (open doors ?, Close windows ? close roof, close side mirrors.....)

[abcpop]

Good News,

My car has been uptaated to 52.4 and it is now possible to insert GPS coordinated as new destination.

[GoHawks]

Need a crash course on this... Only two days into X3 ownership, but a handful of the changes mentioned in this thread intrigue me.

[shawnsheridan]

Post 1 is your Crash Course:

http://x3.xbimmers.com/forums/showpo...74&postcount=1

All you need is Cable and Software.

[abcpop]

This question is not directly connected to coding.

Where to find or buy a DVD "BMW WORKSHOP MANUAL" for F series 2013 onward

Thanks

[Magwich]

Coding question: The first time I tried to code everything went well, throughout the startup process all the way through coding and disconnecting. I then tried to reconnect but the button to select for connect via VIN I can no longer check. It says in that box "ZGW data not available" or something to that effect. I reboot computer, turned car on and off and restarted from scratch and it made no difference. i can connect to the car via the other selections (gateway/ethernet) in that same window where the select by VIN is, but with those connections you can't read the FA. Any help?

[shawnsheridan]

Let the car go fully to sleep. Try again after an hour and see if Connect via VIN is working.

[Magwich]

Thank you for the advice. I don't understand what happened but that did the trick!

[shawnsheridan]

They get jammed up, and the car needs to go to sleep to reset the IP Port.

[RhoXS]

Originally Posted by shawnsheridan

You can rule out the firmware. F025-13-07-506 is ISTA/P 2.50.4, so there should be no issue with it working with this firmware.

The quote above is the response to a question I had a week or two ago concerning a problem I am having with making the TPM pressure/temp display show the actual data.

A few weeks ago I modified HU_CIC, RDC_SAFETY, to 01 active. That did cause the display to show the graphics associated with displaying the actual data but the data itself is not displayed, only a few "---" appear in place of the numbers. (BTW, the cheat sheets indicate "RCD_SAFETY" but I am sure this is a typo and it should be "RDC_SAFETY")

Today I recoded it back to 0, inactive, saved the change, and the associated graphics were no longer displayed. I then recoded it back to active and again there are only dashes for the actual numbers.

Ant suggestions what to troubleshoot would be appreciated.

[shawnsheridan]

Yes, whatever cheat sheet you were looking at, if it showed RCD instead of RDC, it was a Typo.

Unfortunately, there is nothing you can do. In some cars, for reasons unknown, it simply refuses to work.

[Tinted_335is]

Has anyone in LA done this? I would love to get in touch with you guys on how you did it and maybe get some help with it. Or get it done by then.

Best,

M

[135iUSN]

Originally Posted by shawnsheridan

Post 1 is your Crash Course:

http://x3.xbimmers.com/forums/showpo...74&postcount=1

All you need is Cable and Software.

No MAC support. Ugggg

[LesAshmore]

I have a 2012 X3 F25, I have done a fair bit of coding on it but I have a problem / query, I am trying to lose the seat belt gongs, I have the location ie "ACSM" But I do not have any "3000 Ausstattungsflags" within it, Can anybody help with this one please?

I have also tried searching for SeatBeltReminder_SBR_Fahrer but no success

[shawnsheridan]

Do not restrict yourself to a specific section of the CAFD, as they vary from one CAFD to another. Search the whole CAFD for FDL Code, without regard to section (i.e. 3000 Ausstattungsflags). Just use the search bar at the top, and search for FDL Codes by name. Understand though that the search bar searches only from the Top => Down, so make sure you start at the top of the CAFD, and do not have any leading or trailing spaces in your search term.

The Seatbelt FDL Codes names vary too. Look for the alternate names below:

SBR_BF_GWF_SBR_BF (aka SeatBeltReminder_SBR_Beifahrer)
SBR_FA_GWF_SBR_FA (aka SeatBeltReminder_SBR_Fahrer)
SPW_BF (aka SBR_PreWarning_Beifahrer)
SPW_FA (aka SBR_PreWarning_Fahrer)

[abcpop]

What is INPA 5.06 with F-Series Support ?

Is it for different purpose than E-sys which I use ?

Thanks

[shawnsheridan]

Originally Posted by abcpop

What is INPA 5.06 with F-Series Support ?

Is it for different purpose than E-sys which I use ?

Thanks

INPA = Interpreter for test procedures.

It is primarily for testing (diagnosis).

See attached User Documentation:

inpa_english.pdf

[abcpop]

Originally Posted by shawnsheridan

INPA = Interpreter for test procedures.

It is primarily for testing (diagnosis).

See attached User Documentation:

Attachment 1041907

Thank you Shawn.

It looks like a labyrinthine system ;-)

[abcpop]

Originally Posted by shawnsheridan

There is the iDrive Controller itself, and there is a separate Handwriting Module that enables the character recognition on top of the Controller. The controller is a simple swap out with the old one, but the Handwriting Module is an addition, and it must be spliced in.

One more question please:

After having replaced the Controler + added the module, will it be possible for BMW to update the I-Level ? or should I first remove them.
(coding will be lost I believe)

Thanks

[shawnsheridan]

Originally Posted by abcpop

One more question please:

After having replaced the Controler + added the module, will it be possible for BMW to update the I-Level ? or should I first remove them.
(coding will be lost I believe)

Thanks

I can't say for sure, but if FA is updated to >=0713 and written to car, ISTA/P most likely won't reject it.

[abcpop]

Originally Posted by shawnsheridan

I can't say for sure, but if FA is updated to >=0713 and written to car, ISTA/P most likely won't reject it.

My factory level is F010-13-07-506
Actual level is F010-14-03-503

Should be OK so ?