Paddle shifter replacement

BMWZ4 · 02-07-2021, 02:33 PM

I don't see the two holes on the steering column to release the airbag. What I do see however, are dimples in the sensatec(?) on either side of the column. Are these dimples just hiding the holes I need to use to release the airbag? I'm assuming using a sharp tool will just "puncture" the dimples?

I'd snap a pic but the dimples won't show up in the pic.

evo-mike · 02-07-2021, 03:21 PM

Quote:

Originally Posted by BMWZ4

I don't see the two holes on the steering column to release the airbag. What I do see however, are dimples in the sensatec(?) on either side of the column. Are these dimples just hiding the holes I need to use to release the airbag? I'm assuming using a sharp tool will just "puncture" the dimples?

I'd snap a pic but the dimples won't show up in the pic.

They aren't holes but perforations in the shape of a +. They're already loose so you don't need to cut them. When you put a tool in through there they fold back and over time will come down to appear closed.

BMWZ4 · 02-07-2021, 03:25 PM

Quote:

Originally Posted by evo-mike

Quote:

Originally Posted by BMWZ4

I don't see the two holes on the steering column to release the airbag. What I do see however, are dimples in the sensatec(?) on either side of the column. Are these dimples just hiding the holes I need to use to release the airbag? I'm assuming using a sharp tool will just "puncture" the dimples?

I'd snap a pic but the dimples won't show up in the pic.

They aren't holes but perforations in the shape of a +. They're already loose so you don't need to cut them. When you put a tool in through there they fold back and over time will come down to appear closed.

Great, I assumed something along those lines. Appreciate the reply

02-07-2021, 02:33 PM	#1
BMWZ4 Major General 1914 Rep 5,112 Posts Drives: '23 X1/'23 Allroad Progressiv Join Date: Apr 2010 Location: Toronto iTrader: (1)	Paddle shifter replacement I don't see the two holes on the steering column to release the airbag. What I do see however, are dimples in the sensatec(?) on either side of the column. Are these dimples just hiding the holes I need to use to release the airbag? I'm assuming using a sharp tool will just "puncture" the dimples? I'd snap a pic but the dimples won't show up in the pic. __________________ '11 Z4 30i (retired);'11 X3 28i (retired); '15 M235i Stage 1 Dinan (recalled & crushed); '16 M235i Stage 3 Dinan (retired); '15 X3 28i (retired); '14 328i (retired), 2019 X3M40i (retired); Loaded '18 X1 (retired); Loaded '20 X3MC DG, Black/Tan Merino (retired); Loaded '23 X1 Cape York green and Red/Black interior; '23 Audi A4 Allroad Progressiv
	Appreciate 0 Tweet Quote