[TXSAW]

Anyone have luck coding the DRLs to LED?

[malkie0831]

Originally Posted by TXSAW

Anyone have luck coding the DRLs to LED?

If you have a car with halogen headlights and the W21W DRL bulbs in the Hi/Beam lights, then yes I have done it.
I contacted BimmerCode support and they gave me the following:

please try the following using expert mode:
AUSG_17_BL2_L_WARM_UEBERW_AKTIV -> nicht_aktiv
AUSG_17_BL2_L_KALT_UEBERW_AKTIV -> nicht_aktiv
AUSG_18_BL2_R_WARM_UEBERW_AKTIV -> nicht_aktiv
AUSG_18_BL2_R_KALT_UEBERW_AKTIV -> nicht_aktiv
AUSG_17_BL2_L_IS_LED -> aktiv
AUSG_18_BL2_R_IS_LED -> aktiv

It worked for me.

[TXSAW]

Originally Posted by malkie0831

If you have a car with halogen headlights and the W21W DRL bulbs in the Hi/Beam lights, then yes I have done it.
I contacted BimmerCode support and they gave me the following:

please try the following using expert mode:
AUSG_17_BL2_L_WARM_UEBERW_AKTIV -> nicht_aktiv
AUSG_17_BL2_L_KALT_UEBERW_AKTIV -> nicht_aktiv
AUSG_18_BL2_R_WARM_UEBERW_AKTIV -> nicht_aktiv
AUSG_18_BL2_R_KALT_UEBERW_AKTIV -> nicht_aktiv
AUSG_17_BL2_L_IS_LED -> aktiv
AUSG_18_BL2_R_IS_LED -> aktiv

It worked for me.

Awesome, I really appreciate the response. I've been searching high and low for this. I'll give those parameters changes a shot.

**UPDATE

This worked. Appreciate it. If anyone else is looking to change these parameters they can be found here:

[ALPx3]

Originally Posted by malkie0831

If you have a car with halogen headlights and the W21W DRL bulbs in the Hi/Beam lights, then yes I have done it.
I contacted BimmerCode support and they gave me the following:

please try the following using expert mode:
AUSG_17_BL2_L_WARM_UEBERW_AKTIV -> nicht_aktiv
AUSG_17_BL2_L_KALT_UEBERW_AKTIV -> nicht_aktiv
AUSG_18_BL2_R_WARM_UEBERW_AKTIV -> nicht_aktiv
AUSG_18_BL2_R_KALT_UEBERW_AKTIV -> nicht_aktiv
AUSG_17_BL2_L_IS_LED -> aktiv
AUSG_18_BL2_R_IS_LED -> aktiv

It worked for me.

Will this work for my 17 stock halogen retrofitting over to oem xenon? I believe the ae are led correct?

I have almost completed the retrofit . The rewiring is done and my coder was a able to get the low beam xenon and turn signals to work. Currently having issues activating the ae drl. Would really appreciate the feedback. TIA

[ALPx3]

Originally Posted by malkie0831

If you have a car with halogen headlights and the W21W DRL bulbs in the Hi/Beam lights, then yes I have done it.
I contacted BimmerCode support and they gave me the following:

please try the following using expert mode:
AUSG_17_BL2_L_WARM_UEBERW_AKTIV -> nicht_aktiv
AUSG_17_BL2_L_KALT_UEBERW_AKTIV -> nicht_aktiv
AUSG_18_BL2_R_WARM_UEBERW_AKTIV -> nicht_aktiv
AUSG_18_BL2_R_KALT_UEBERW_AKTIV -> nicht_aktiv
AUSG_17_BL2_L_IS_LED -> aktiv
AUSG_18_BL2_R_IS_LED -> aktiv

It worked for me.

Will this work for my 17 stock halogen retrofitting over to oem xenon? I believe the ae are led correct?

I have almost completed the retrofit . The rewiring is done and my coder was a able to get the low beam xenon and turn signals to work. Currently having issues activating the ae drl. Would really appreciate the feedback. TIA

[TXSAW]

Originally Posted by ALPx3

Will this work for my 17 stock halogen retrofitting over to oem xenon? I believe the ae are led correct?

I have almost completed the retrofit . The rewiring is done and my coder was a able to get the low beam xenon and turn signals to work. Currently having issues activating the ae drl. Would really appreciate the feedback. TIA

I'm not sure of the exact parameters for xenon retrofit, but I'd suggest adjusting those parameters, specifically the hot/cold checks. With a little bit of trial and error, I'm sure you would figure out with light is which. They may be exactly the same as the stock halogen setup but I can't say for certain.

Not much help, but hope it gets you in the right direction. goodluck.