[rockit2]

looking at upgrading the stock 18's they have corrosion forming around the lug holes and had a question. Which would push the wheel to the outside more
19x8.5 front 35 offset
19x9.5 rear 40 offset

OR

19x8.5 35 offset all the way around

the stock wheels look very tucked in wanted a wider stance

[E90705]

Originally Posted by rockit2

looking at upgrading the stock 18's they have corrosion forming around the lug holes and had a question. Which would push the wheel to the outside more
19x8.5 front 35 offset
19x9.5 rear 40 offset

OR

19x8.5 35 offset all the way around

the stock wheels look very tucked in wanted a wider stance

You can add wheel spacers. Depends if you want a staggered wheels/ tire setup.

[rockit2]

I found a set of oem x3 19" front are 19x8.5 with 46 offset and the rear are 19x9 with 51 offset for the yspoke wheels so do these tuck in more compared to the 35 offset stick out more

[BIG_KID]

Lower number ET (offset) means the wheel will stick out further

[Victoracer]

https://www.willtheyfit.com/index.ph...9-5&offset2=22

[WagonR]

The factory 18s appear to be 18x8 with a 43mm offset. That means the face of the wheel would be 58.5mm (2.3 inches) from the hub (203mm width, divide by 2 to get the 101.5mm midpoint, less 43mm of offset = 58.5mm hub to face of wheel).

For the wheels you show
19x8.5 35 offset = 73mm (2.9 inches) from hub to face of the wheel (216mm width/2 = 108mm midpoint - 35mm offset = 73mm)

19x9.5 40 offset = 80.5mm (3.2 inches) from hub to face of the wheel (241mm width/2 = 120.5 - 40mm offset = 80.5mm)

In summary -
19x8.5 35 offset will stick out 14.5mm (0.6 inches) further than stock wheels
19x9.5 40 offset will stick out 22mm (0.9 inches) further than the stock wheels

[Taoster]

Wheel spacers