10-15-2013, 01:32 AM | #771 | |
Private
0
Rep 80
Posts |
Quote:
My car is a F06 Jully 2013 I'll have a look to Tool32 or INPA which I do not know yet. How do those prog connect to the car ? Same cable as E-Sys (RG45 / ODB) ? |
|
Appreciate
0
|
10-15-2013, 05:10 AM | #772 | |
General
10340
Rep 40,310
Posts
Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX
|
Quote:
First, edit C:\EDIABAS\Bin\EDIABAS.INI to read: Interface=ENET Then, assuming the fault condition no longer exists, to clear the fault code. 1) Launch C:\EDIABAS\Bin\TOOL32.EXE 2) Hit F3 3) Load C:\EDIABAS\Ecu\F01.PRG 4) In the "Select Job: F01" window, select FS_LOESCHEN_FUNKTIONAL 5) Hit F5 6) "Results" window should show "JOB_STATUS = OKAY" Hopefully, Problem Solved. Note: fs_lesen_funktional only read fault codes, FS_LOESCHEN_FUNKTIONAL will delete it.
__________________
2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant 2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE |
|
Appreciate
0
|
10-15-2013, 07:00 AM | #773 | |
Private
0
Rep 80
Posts |
Quote:
Thank you. Great. It solved the problem |
|
Appreciate
0
|
10-15-2013, 07:10 AM | #774 |
General
10340
Rep 40,310
Posts
Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX
|
__________________
2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant 2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE |
Appreciate
0
|
10-15-2013, 07:26 AM | #775 |
Private
0
Rep 80
Posts |
In F06 if opening doors is set on "comfort", when opening doors with a double click on the remote, the front windows go down half when opening the door, then close automatically when closing door.
Any chance to code this function for normal opening (without the remote) and also for rear doors ? Thanks |
Appreciate
0
|
10-15-2013, 07:43 AM | #776 | |
General
10340
Rep 40,310
Posts
Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX
|
Quote:
__________________
2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant 2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE |
|
Appreciate
0
|
10-15-2013, 10:09 AM | #777 |
Private
0
Rep 80
Posts |
Correct: When opening the doors, the windows open slightly to avoid air compression.
But there are 3 possibilities to set the open button from the remote fob button 1: only driver door 2: all 4 doors 3: Confort : In this setting : single click open the 4 doors and a double click open 4 doors + when opening the door with the handle the front window open half way ( about 25 cm) then close itself when closing the door. I'll like this behaviour to be as normal for all doors even when opening from inside. It give more space for the head when sitting in or leaving the car. |
Appreciate
0
|
10-15-2013, 10:19 AM | #778 | |
General
10340
Rep 40,310
Posts
Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX
|
Quote:
__________________
2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant 2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE |
|
Appreciate
0
|
10-17-2013, 01:24 AM | #779 |
General
10340
Rep 40,310
Posts
Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX
|
FYI. For those asking, The 2014 Europe PREMIUM map for CIC has now joined the North America version as being available.
We are still waiting on 2014 Europe and North America NEXT maps for NBT.
__________________
2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant 2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE |
Appreciate
0
|
10-19-2013, 04:57 PM | #780 |
Private
0
Rep 80
Posts |
The version on my F06 is EUROPE NEXT 2013-2. Is it the latest ? or it is replaced by EUROPE PREMIUM 2014-1 ?
|
Appreciate
0
|
10-19-2013, 06:54 PM | #781 | |
General
10340
Rep 40,310
Posts
Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX
|
Quote:
2014 NEXT should be available very soon, Next week I hope.
__________________
2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant 2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE Last edited by shawnsheridan; 10-20-2013 at 04:06 AM.. |
|
Appreciate
0
|
10-20-2013, 03:13 AM | #782 |
Private
0
Rep 80
Posts |
|
Appreciate
0
|
10-20-2013, 06:36 AM | #783 |
Second Lieutenant
15
Rep 233
Posts |
Can the rear window defogger be recoded to a longer time delay before shutting off?
Right now it auto shuts off after exactly ten minutes. I would much rather it stayed on until I made the decision to turn it off or, at worst, stay on for a much longer time period. On hot humid days the window fogs up immediately after it auto turns off. On very cold sub zero days with snow or sleet, the rear defogger needs to stay on continuously to help keep ice from sticking to the rear window. |
Appreciate
0
|
10-20-2013, 02:47 PM | #784 |
Enlisted Member
1
Rep 31
Posts |
I coded Manually the ECO PRO Function on my X3 F25 3.0D
as follow but is not possibile to flag some options ( see the pictures ) HU_CIC > 3000 HMI > ECOMODE >Aktive HU_CIC > 3000 HMI >HVAC_MSD_EFFICIENCY >Aktive HU_CIC > 3000 HMI >EFF_DYN_SYS_CID >Aktive HU_CIC > 3000 HMI > ECO_FDS_POPUP>Aktive HU_CIC > 3000 HMI > ECO_MODE_CONF>Aktive HU_CIC > 3000 HMI > ECO_ROUTE>Aktive HU_CIC > 3000 HMI > ECO_TIPPS>Aktive KOMBI > 3003 FZG >VERBR_HISTORIE_ENABLE>Aktive KOMBI > 3004 ERM > CTR_HSTY_DISP_KI_APPL >Aktive IHKA > 3000 > ECO_PRO_MODE >aktiv ICM ECU: 3000 -> IcmKod_B_ECONOMIC > verbaut Probably the problem is here: 3003 ECO_FDS, 3C FDS_MENU_TEXT"n" & FDS_MENU_SIGNAL"n" my Actually menu is NORMAL, SPORT , SPORT+ Anybody in the forum has X3 F25 with ECO PRO function from the factory and can check the right parameter ? thanks in advance |
Appreciate
0
|
10-21-2013, 12:49 PM | #785 |
Lieutenant
29
Rep 427
Posts |
I need to swallow a bit and just start the process on mine.
__________________
2013 X3 3.5i AW,Msprt,rear fogs,PS,CP, Tech, etc...
Other cars 2005 S2000 2018 i3S |
Appreciate
0
|
10-21-2013, 08:12 PM | #786 |
Enlisted Member
3
Rep 43
Posts |
Hi all,
I coded my car and I am trying to code it again because BMW did a software reload on it. The car is asking for this specific file at 2 places, and I don't have it. file name: "CAFD_0000000F_005_024_228" 1. C:\EsysData\psdzdata\swe\cafd 2. C:\EsysData\SWE\cafd and in my esys folder the closest I have is CAFD_0000000F_005_024_332 Would you please send the CAFD file to me if you have it? It's much appreciated! richardchou2000@hotmail.com Thanks, Richard |
Appreciate
0
|
10-21-2013, 09:34 PM | #787 | |
General
10340
Rep 40,310
Posts
Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX
|
Quote:
What versions of E-Sys and PSdZData are you using? What is your I-Step (current)? http://www.f30post.com/forums/showpo...postcount=1403
__________________
2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant 2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE |
|
Appreciate
0
|
10-22-2013, 04:44 AM | #789 |
General
10340
Rep 40,310
Posts
Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX
|
So, you problem is this. You car is at F025-13-03-503, which is ISTA/P 2.49.x. The PSdZData you use must be >= to the last version of ISTA/P used to program the car, and yours, which you wrote is 46.3 and is most likely actually 48.3, is too old. This means you must update your PSdZData, which in turn means you must also update to new E-Sys with patch / token as 48.3 PSdZdata is as high as you can go with E-Sys 3.18.4 for F25 chassis.
PM sent.
__________________
2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant 2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE |
Appreciate
0
|
10-22-2013, 01:00 PM | #790 |
Private
0
Rep 80
Posts |
I found this way to code http://dvdinmotion.com/how-it-works
Crazy prices but interesting. Does someone knows more about this software? Could we adjust some files to code other functions ? Last edited by abcpop; 10-22-2013 at 01:34 PM.. |
Appreciate
0
|
10-24-2013, 03:14 PM | #791 | |
General
10340
Rep 40,310
Posts
Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX
|
Quote:
Start with Post # 24 here (remove all *): h*t*t*p://www.b*m*w*c*o*d*i*n*g*.*c*o*m*/showthread.php?373 Much was learned about it, but in the end nothing came of it as it was never determined how to expand on it to code other things. It is VIN specific too, and when it was used in the head unit of a car with a different VIN, the CIC bricked upon booting, presumably a protection scheme.
__________________
2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant 2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE |
|
Appreciate
0
|
10-24-2013, 06:04 PM | #792 |
Private First Class
16
Rep 181
Posts |
I have kind of a non-standard coding question. Since BMW uses electric oil pumps now, could coding be used to run the oil pump briefly before starting to pre-lubricate the engine?
|
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|