2015 535i (f10) alloys on 2017 X3 (f25)?

X3MYYZ · 10-03-2022, 07:03 PM

I warped one of my original alloys and found a nice 19 inch set, but theyre from a 2015 535.

how can i ensure this alloy set will fit/match the 245/45/r19 rubbers?

Wesasxm · 10-04-2022, 07:52 PM

Inside the mag you have the offset n size ��

Wesasxm · 10-04-2022, 07:53 PM

Tire size 245/45r19 is ok for this mag but on your car

richardodn · 10-05-2022, 05:03 AM

According to wheel-size.com 2015 535 has 245/40/19 on 8.5x19 et33 and 72.6 centerbore. Lugs 5x120 using M14x1.25 bolts.

For the F25, it's 245/45/19 on 8.5x19 et 38 and the same centerbore and lugs.

Your tires will fit as original. The change in offset will move the wheel centerline 5mm outboard which is a bit less than a 1/4". That shouldn't be an issue.

Finally, note that if this were a G series X3, they would not fit at all.

10-03-2022, 07:03 PM	#1
X3MYYZ New Member 4 Rep 6 Posts Drives: BMW X3 Join Date: Jun 2019 Location: YYZ iTrader: (0)	2015 535i (f10) alloys on 2017 X3 (f25)? I warped one of my original alloys and found a nice 19 inch set, but theyre from a 2015 535. how can i ensure this alloy set will fit/match the 245/45/r19 rubbers?
	Appreciate 0 Tweet Quote

10-04-2022, 07:52 PM	#2
Wesasxm New Member 0 Rep 16 Posts Drives: BMW X3 f25 2012 Join Date: Sep 2022 Location: Canada ,QC 🇨🇦 iTrader: (0)	Inside the mag you have the offset n size ��
	Appreciate 0 Quote

10-04-2022, 07:53 PM	#3
Wesasxm New Member 0 Rep 16 Posts Drives: BMW X3 f25 2012 Join Date: Sep 2022 Location: Canada ,QC 🇨🇦 iTrader: (0)	Tire size 245/45r19 is ok for this mag but on your car
	Appreciate 0 Quote

10-05-2022, 05:03 AM	#4
richardodn First Lieutenant 160 Rep 350 Posts Drives: '12 X3 35iX/'20 440ix cabrio Join Date: Dec 2018 Location: Denver, CO iTrader: (0)	According to wheel-size.com 2015 535 has 245/40/19 on 8.5x19 et33 and 72.6 centerbore. Lugs 5x120 using M14x1.25 bolts. For the F25, it's 245/45/19 on 8.5x19 et 38 and the same centerbore and lugs. Your tires will fit as original. The change in offset will move the wheel centerline 5mm outboard which is a bit less than a 1/4". That shouldn't be an issue. Finally, note that if this were a G series X3, they would not fit at all. __________________ 1986 Delphin 528e - Roof rack equipped lumber hauler. 2008 Platinum-Beige X3 3.0si - Current project 2012 Alpine White X3 xDrive35i - My new snowmobile. 2020 Estoril Blue 440i xDrive cabrio w/MPPSK - This car is a blast to drive.
	Appreciate 0 Quote